HVAC, Plumbing, and Electrical Experts in Byron Center

Responded to no cooling call for residential HVAC system with 22-year-old air conditioner and 16-year-old Amana furnace. Inspected basement mechanical room installation including electrical panel, EWC Ultra Zone Control System (Model EWC-ST-2D), condensate drainage assembly, and refrigerant line set. Documented existing two-zone motor control system with relay modules and terminal connections, along with current equipment configuration and electrical components mounted on utility room wall.

Successfully completed full installation of new Amana furnace and Bradford White water heater in basement utility room. Furnace installation included proper mounting of gray cabinet unit, connection of supply and return ductwork, installation of white PVC intake and exhaust venting routed through ceiling joists, and complete electrical hookup with all manufacturer specifications verified. Water heater installation included positioning of new Bradford White unit, connection of copper supply and discharge lines with shut-off valves and brass fittings, installation of temperature and pressure relief valve, proper flue pipe installation for venting, and verification of all safety labels and energy guide documentation. All plumbing connections tested for leaks, gas connections pressure tested and verified, electrical connections confirmed operational, and both units fired up and tested for proper operation. System left in full working order with all manufacturer labels intact and visible.

Completed toilet replacement in multiple designated bathrooms of a 10-year-old residential property. Removed existing fixtures and installed new white two-piece toilets with standard tank and bowl configuration. Ensured proper mounting, sealing, and connection to existing plumbing systems. Verified functionality and leak-free operation of all replaced units. Work completed over a two-day period as planned.

Completed annual cooling maintenance on 19-year-old Bryant AC system with 2015 compressor. Performed comprehensive tune-up inspection, documented electrical components including capacitor and wiring connections, and captured photos of equipment condition for service records.

Conducted on-site evaluation for furnace and water heater replacement in a 2013-built residential property with original equipment. Assessed existing HVAC system including air handler with foil-wrapped ductwork, water filtration system with multiple cylindrical filter cartridges, and associated refrigerant lines. Evaluated white cylindrical water heater with PVC venting, copper supply connections, and pressure relief valve assembly. Documented mechanical room configuration including exposed framing, drainage systems, and utility connections. Photographed all equipment specifications, manufacturer labels, and installation components to provide accurate replacement recommendations for both units reaching end of serviceable life.

Completed annual cooling maintenance on 11-year-old EnergiAir system. Performed standard tune-up procedures including system inspection, filter check, and operational testing. Documented condensate drain line components during service, noting PVC drain fittings and connections for maintenance records. All system components found operating within normal parameters and unit left in proper working condition.

Completed annual cooling maintenance on 24-year-old Payne system with 2011 condenser model. Performed comprehensive tune-up including system inspection, refrigerant level check, electrical component testing, condensate drain evaluation, and filter assessment. All components operating within normal parameters; no deficiencies noted requiring immediate attention.

Completed annual cooling maintenance on EnergiAir system. Performed comprehensive inspection of outdoor condensing unit including electrical components, capacitor, and control board. Verified all wire connections secure, tested capacitor function, and inspected electrical panel for proper operation. Documented equipment condition with photos showing clean electrical compartment and properly functioning components. System operating within normal parameters with no issues found.

Completed full HVAC system installation in residential basement mechanical room. Installed new Carrier furnace unit with associated metallic ductwork, including rigid metal pipes and aluminum flexible ducting with proper vertical and horizontal connections. Installed black corrugated flexible condensate line and integrated system with existing Bradford White water heater plumbing. Routed all ductwork through unfinished basement space with proper support and connections to distribution system. Verified all mechanical connections, tested system operation, and confirmed proper airflow through installed ductwork. Installation includes complete furnace and air conditioning system with all necessary ventilation components and connections per specifications.

Provided estimate for water heater replacement in basement utility area. Existing white cylindrical water heater assessed with copper piping connections, pressure relief valve, and current integration with overhead HVAC ductwork system. Documented installation space including exposed wooden joists, OSB ceiling panels, galvanized metal ventilation ducts, and structural framing to determine optimal replacement configuration and ensure proper clearances for new unit installation.

Completed comprehensive electrical club inspection at residential property. Thoroughly examined main electrical panel, documenting all circuit breakers, safety labels, and main disconnect components. Panel found to be properly labeled with DANGER warnings and electrical hazard notifications present. Verified condition of dual-column breaker configuration and captured photographic documentation of panel interior for client records.

Completed estimate for furnace and air conditioning system replacement at residential property with non-operational AC unit. Documented existing outdoor condenser unit positioned on concrete pad with electrical disconnect box and conduit connections, as well as covered patio installation area with existing electrical infrastructure and thermostat controls mounted on exterior wall.

Completed full HVAC system installation including Bryant brand furnace and air conditioning condenser unit. Interior furnace installation in basement utility area included proper positioning on protective pad, connection of metallic flex ductwork, rigid supply ductwork, white PVC condensate drainage and venting lines, wall-mounted thermostat with associated wiring, and integration with existing sheet metal air handler component. Exterior condenser unit installed on concrete pad in brick alcove with proper electrical disconnect box mounting, conduit runs, and refrigerant line connections. All equipment positioned for adequate airflow clearance and maintenance access, system tested and verified operational.

Completed annual cooling maintenance on 10-year-old Trane system. Discovered and removed significant accumulation of grass clippings and nesting debris from interior of condensing unit that had built up around electrical components and terminals. Cleared all organic material, inspected wiring connections, verified proper operation of all system components, and documented conditions with photos.

Completed comprehensive ASTU-AC Super Tune-up on 13-year-old equipment. System inspection, cleaning, and performance verification performed with all components operating within manufacturer specifications. Scheduled future heating maintenance appointment for continued preventive care.

Responded to no cooling call where furnace blower was operating but outdoor unit failed to run. Upon inspection, discovered faulty contactor in outdoor disconnect preventing compressor operation. Tested voltage at terminal blocks and confirmed power supply to unit. Replaced defective contactor, verified proper electrical connections at both indoor control panel and outdoor disconnect box, and restored system to normal cooling operation. All wiring connections secured and tested for proper voltage and amperage draw.

Conducted on-site assessment for standby generator installation estimate. Evaluated existing electrical infrastructure including main service panels, circuit breaker configuration, and available utility space in basement area. Documented current electrical system setup with two main distribution panels and auxiliary disconnect box to determine proper integration points for proposed automatic transfer switch and generator connection. Photographed electrical panel specifications and available installation locations to develop accurate pricing proposal for whole-home backup power system.

Completed comprehensive annual heating and cooling maintenance on two 9-year-old Trane systems, including furnace, air conditioning, and humidifier tune-up. Inspected and serviced all major HVAC components, including blower assembly, electrical connections, and drainage systems. Addressed significant debris accumulation and moisture buildup in condensate drain pan, cleaning and clearing blockages to ensure proper drainage function. Verified all electrical connections at terminal blocks, inspected wiring harness integrity, and tested motor assembly operation. Cleaned internal components, replaced humidifier connector clips, and confirmed proper airflow through filtration system. All systems tested and operating within manufacturer specifications upon completion.

Completed annual cooling maintenance on 20-year-old Heil air conditioning system. Performed comprehensive tune-up including standard safety and performance checks. Inspected evaporator coil assembly and air handler unit, documenting significant rust and corrosion on copper refrigerant lines indicating prolonged moisture exposure. Utilized borescope camera to conduct detailed internal ductwork inspection, capturing images of interior conditions and metal surfaces. Noted extensive oxidation with brownish-red patina on copper tubing and surface deterioration on metal panels. Observed insulation material condition and verified mounting brackets and assembly components. System operational at time of departure, though corroded refrigerant lines may require future attention to prevent potential refrigerant leaks or system efficiency loss.

Completed annual cooling maintenance on 17-year-old Lennox system with PureAir air purification system. Performed standard inspection procedures, verified system operation, and documented equipment condition with photos showing unit in clean, operational status with purification system indicator lights functioning properly.