HVAC & Plumbing Services in Grand Rapids, MI

Successfully installed new Carrier furnace system in basement utility room. Unit was properly connected to existing ductwork with vertical exhaust pipe secured to horizontal ventilation near ceiling. All manufacturer specifications were followed and system is functioning as designed.

Performed annual heating maintenance on 14-year-old Goodman furnace. Cleaned condensate drain pan which showed significant mineral buildup and algae growth. Replaced drain pan tablets to prevent future biological growth and ensure proper drainage function.

Completed annual heating tune-up on a 10-year-old furnace with contract maintenance valid through 2025. Inspected electrical connections, gas valve assembly, and pressure switch components. No issues found with the system; all components operating within normal parameters. No humidifier service required.

Successfully completed quoted repair involving installation of a Gerber Viper toilet. Removed old fixture, installed new toilet with proper sealing and connection to existing plumbing, and verified proper function with leak test. Left work area clean after completion.

Responded to customer report of unusual noise from recently installed Bradford water heater. Inspected plumbing connections, focusing on the PVC pipe installation which showed proper purple primer application at joints. Checked electrical connections and verified proper power supply to unit. Determined noise level was within normal operating parameters for this newer model.

Completed water heater assessment for CWOW customer, documenting existing installation with photos. Evaluated current system which includes cylindrical tank with connected black insulated pipe, yellow flexible gas line, and blue PEX water line, along with a circulator pump mounted on top. Provided comprehensive estimate for water heater replacement options.

Successfully installed a Bradford White water heater in utility room, including proper venting system and connection of all required plumbing. Unit was secured on metal base with appropriate clearances maintained from surrounding structures and HVAC equipment.

Successfully installed new residential AC condensing unit on existing concrete pad foundation. Unit was properly connected to home with PVC line set, and all installation procedures were completed according to manufacturer specifications. Final inspection and system test confirmed proper operation of the newly installed system.

Performed annual heating maintenance on Amana HVAC system. Inspected outdoor condenser unit which is properly installed on concrete pad with adequate clearance. System is operational with no visible damage or deterioration noted.

Completed FSTU on 16-year-old Bryant furnace system with comprehensive inspection and testing. Water heater inspection revealed normal operation with exhaust temperature reading of 139.8°F at the vent pipe. Both units are functioning properly with no immediate concerns identified.

Completed annual heating maintenance service on dual Bradford White water heater system with ENE warranty valid until 10-2028. Performed standard furnace tune-up and humidifier service as part of maintenance club agreement. Visual inspection confirmed proper installation of copper and PVC piping with functional valves and connections; both units operating within normal parameters with no visible issues detected.

Successfully completed the quoted repair by installing customer-supplied faucet in kitchen area with stainless steel sink basin and marble countertop, ensuring proper function with no leaks. Also installed customer-supplied toilet in bathroom with wood-look flooring and grab bar, testing for proper flushing and secure mounting.

Completed installation of a double bowl sink with new strainers and tubular drain assembly. Assembled and connected all P-trap components and drain piping beneath the bathroom vanity. Work was performed according to quoted specifications and verified proper drainage before completion.

Successfully replaced kitchen faucet and cleared tub blockage using drain rodding equipment. Inspected basement plumbing infrastructure including vertical PVC drain pipe with rusty-brown discoloration and confirmed proper water heater operation with no leaks present.

Completed annual heating maintenance on a 2018 EnergiAir furnace (model WT 08-2035). Performed comprehensive tune-up with visual inspection of all components, confirming proper installation of PVC venting and sealed ductwork connections. No issues identified with the system; unit is operating within manufacturer specifications.

Successfully installed a new 40-gallon natural gas water heater (ND 6/1 - Tall model) in residential utility area. Completed all required plumbing connections, including proper installation of pressure relief valve and copper piping. Verified system functionality and ensured no leaks in the final installation.

Relocated humidifier to the front of the stand pipe per inspector's correction requirements. Verified proper installation using level measurement and confirmed all connections to HVAC system were secure and operational.

Performed annual heating maintenance on Rheem Guardian System Fury Gas Water Heater (Model 42V75F, manufactured 05/2010). Inspected unit with 75,100 BTU input rating and 80% thermal efficiency, verifying proper operation of all components and connections including copper supply lines and PVC venting system.

Responded to a water leak complaint from customer's furnace system. Upon inspection, identified condensate drainage issue from the 3-year-old Energy furnace. Repaired damaged condensate line and verified proper drainage, ensuring the heating system continued to function correctly with no further leakage.

Responded to no-heat call for 4-year-old furnace not turning on. Upon inspection, found faulty control board with visible damage to electronic components. Replaced main circuit board, reconnected all wiring harnesses according to manufacturer specifications, and verified proper system operation through complete heating cycle test.