HVAC & Plumbing Services in Grand Rapids, MI

Diagnosed and resolved water supply issue to kitchen sink, replacing corroded copper supply lines and fittings. Identified significant mineral buildup and oxidation at connection points which had restricted water flow. System now functioning properly with all connections tested for leaks.

Conducted AC system estimate where ice damage was reported on a Goodman HVAC unit. Documented the furnace installation including ventilation components, mounting platform, and connection points. Photos taken of the complete system for assessment of repair requirements.

Investigated odor issue in garage apartment with mini-split system. Inspected ceiling-mounted HVAC cassette unit and identified musty smell emanating from condensate drain line. Cleaned drain line and applied antimicrobial treatment to prevent future bacterial growth causing odors. Recommended portable humidifier solution to address customer's concerns about cracking paint and dehydrating wood in the space.

Successfully installed new gas lines for both stove and dryer locations. Properly routed gas piping along baseboard area with appropriate connections to existing gas supply. All connections were pressure tested to verify system integrity and ensure safe operation of appliances.

Performed annual heating tune-up on a 9-year-old Carrier furnace (Model WT, Serial 02-2027) for Comfort Club member. Inspected and cleaned components including collection tray which showed minor discoloration but remains functional. System is operating within manufacturer specifications.

Responded to emergency service call for a leaking sink causing complete loss of sink and dishwasher functionality. Inspection revealed worn P-trap assembly with mineral deposits at connection points causing water leakage. Replaced damaged P-trap components and fittings, applied appropriate thread sealant, and verified proper drainage with no leaks after repair.

Completed estimate for dual AC unit replacement in a duplex property. Assessed existing HVAC systems with furnace located in basement for lower unit and in attic for upper unit. Documented current equipment condition with photos and evaluated space for potential mini-split installation as an alternative solution.

Successfully installed new Comfort Systems furnace with proper venting via PVC intake/exhaust pipes. Completed all connections to existing ductwork, electrical, and plumbing systems. Unit mounted on protective base pad with all required safety labels and documentation in place.

Responded to water leak service call for 9-year-old Bryant system. Inspected basement area showing water damage and staining on concrete walls. Examination of plumbing components revealed leakage from deteriorated plastic tubing connections under the fixture, which were replaced and secured with proper mounting clips to prevent future leakage.

Diagnosed furnace issue preventing system from exceeding 60°F. Performed inspection of pressure switch and electrical components, taking voltage readings with EM201B meter. Determined proper function restored after servicing the recently installed (2023) equipment.

Inspected sump pump system following reports of previous failure and flooding. Accessed wall panel to evaluate plumbing infrastructure where significant corrosion was observed on copper pipes and fittings. Replaced failed sump pump with new unit after confirming motor burnout, ensuring proper installation and function to prevent future basement flooding.

Diagnosed electrical issues with in-floor heating system in sun porch. Performed amperage testing with UEi DL479 clamp meter, obtaining readings of 1.00A and 180.7A on the Bradford White system components. Verified proper electrical supply and operation after previous service work.

Completed annual heating maintenance on 13-year-old Energy Elite Series furnace. Performed standard tune-up procedures including inspection of heat exchanger, burners, and electrical connections. System is operating within normal parameters with no humidity control issues. Verified proper venting through PVC exhaust system.

Performed annual heating maintenance on furnace and humidifier system. Removed and cleaned condensate collection container which showed signs of buildup and discoloration. Inspected and cleaned housing component with visible residue and water marks, ensuring proper system operation.

Completed quoted repair work on main floor, focusing on kitchen sink area. Performed necessary repairs to the double-basin white undermount sink and surrounding cabinetry. Work was completed within the scheduled 4-hour timeframe, with documentation photos taken to verify completed service.

Successfully installed new furnace unit in basement utility room, connecting to existing ductwork and PVC venting system. Performed complete installation including electrical connections and verified proper operation of the new system before completion.

Performed annual heating system maintenance on 10-year-old EnergiAir furnace with integrated humidifier. Inspected and replaced dirty air filter with visible dust accumulation. System is functioning properly with no issues identified during the comprehensive tune-up service.

Performed complimentary furnace tune-up on EnergiAir unit (model WT 01-2034). Inspected HVAC system components including PVC venting, copper lines, and drainage. No humidity control system present; system functioning properly with no issues identified.

Performed complimentary seasonal furnace tune-up on 5-year-old Comfort Maker unit (2022 model). Inspected humidifier components and conducted comprehensive system evaluation. Documented condition with photos showing electronic control housing with dust accumulation, requiring cleaning for optimal performance.

Performed estimate for backup sump pump installation in basement. Inspected existing sump pit containing standing water with visible float switch mechanism and documented current discharge plumbing configuration. Evaluated wall-mounted PVC discharge pipe system with installed check valve and noted signs of previous moisture issues requiring attention during potential installation.