HVAC & Plumbing Services in Grand Rapids, MI

Completed annual maintenance on EnergiAir furnace (model WT 01-2034). System was functioning properly upon arrival with no issues reported by customer. Performed standard tune-up procedures and documented installation with photos showing the condensate drain assembly and pump configuration.

Conducted a comprehensive assessment of a 45-year-old residence for water heater replacement. Evaluated existing unit located in basement utility area, which features copper supply lines, brass valves, galvanized metal venting, and connections to home's plumbing system. Photos documented current installation configuration against concrete block walls for accurate replacement specifications.

Successfully completed installation of a new Carrier HVAC system with associated ductwork in residential basement. System includes properly connected PVC drainage lines, insulated return ducting, and all necessary electrical connections. All components were secured and tested for proper operation before completion.

Responded to recurring no-heat complaint on Energi WT 12/2032 furnace. Discovered severely dust-contaminated inducer motor assembly causing unit failure. Cleaned and serviced motor components, restoring proper operation. This represents third service call for similar issues, indicating need for more frequent maintenance.

Performed annual tune-up on 14-year-old Carrier furnace with humidifier. Identified mold growth and dust accumulation on interior components, with visible moisture damage to electrical connections and mounting hardware. Equipment shows significant wear consistent with age and requires monitoring for safe operation.

Investigated leak near water heater in basement utility area. Identified and repaired copper pipe connection issue at shut-off valve junction. Tested system after repair to confirm proper operation with no further leakage.

Responded to no-heat call for 20+ year old furnace. Inspection revealed significant dust and debris buildup on heat exchanger. Cleaned heat exchanger components, removed accumulated dirt from burner assembly, and restored proper ignition sequence. System now operating with proper flame pattern and delivering appropriate heat output.

Performed annual tune-up on 7-year-old EnergiAir furnace system with integrated humidifier. Inspected burner assembly, blower motor, and electrical connections; all components functioning normally. Documented service with photos of internal components for service record.

Performed complimentary annual tune-up on EnergiAir furnace (model WT 07-2035) per customer request. Inspected all components and connections including ventilation system, PVC piping, and ductwork. System functioning properly with no issues identified.

Performed annual maintenance on 13-year-old EnergiAir furnace. Conducted safety inspection using gas leak detector, checked all components, and verified proper operation. System is functioning correctly with no issues detected.

Completed inspector correction on Amana A/C unit by finishing line set insulation at the coil as required. System installation includes proper LSP/GFI protection, sealed coil, and functional drainage. Mechanical inspection approval confirmed and documented with photographic evidence.

Diagnosed and repaired a slow leak originating from the main kitchen faucet, which was initially thought to be coming from the adjacent reverse osmosis system. Inspected under-sink plumbing components, including PVC drain pipes and supply lines, and found no issues with the RO system connections. Completed necessary repairs to resolve the leak at the faucet assembly.

Responded to CO alarm activation for a visually impaired client. Upon inspection, found the Defender carbon monoxide detector displaying "End" message indicating end-of-life status. Replaced the expired unit with new detector which is now functioning properly, showing "0 PPM" reading. Client educated on proper CO alarm maintenance and replacement schedule.

Completed annual heating maintenance on a 6-year-old furnace with humidifier as part of Energy Savings Club service. Inspected blower motor assembly and electrical connections, noting normal dust accumulation consistent with regular operation. All wiring connections were secure with no signs of damage or deterioration to components.

Successfully installed a 40-gallon natural gas Bradford White water heater with 6-year warranty in the customer's basement mechanical room. Properly connected all required black insulated and copper piping to the unit, ensuring proper integration with the existing EcoAir HVAC system. Completed installation in 4 hours with all connections tested and verified operational.

Performed annual heating maintenance on 3 systems: two furnaces and one Munchkin boiler. Serviced associated humidifiers. Inspected plumbing infrastructure including PVC and copper piping. All systems functioning properly with no issues identified. Left equipment in operational condition.

Completed annual heating maintenance service on 3-year-old Reznor furnace per Comfort Club membership. Performed comprehensive tune-up with no issues found. System is operating correctly with proper venting through PVC exhaust pipes, and all connections including copper lines and shut-off valves are secure and in good condition.

Conducted site assessment for gas line relocation project in unfinished basement of century-old residence. Evaluated existing gas supply configuration for dryer and documented current installation with photos, noting exposed joists, existing PVC plumbing, and structural elements requiring consideration during planned relocation. Provided comprehensive estimate for moving gas line to new wall location with allowances for potential future gas dryer upgrade.

Completed the quoted repair by replacing the HVAC condensate drain kit as scheduled. Installed new PVC piping with proper connections and fittings to ensure effective drainage from the furnace system. Documented the completed installation with photos showing the new drain assembly properly connected to the existing HVAC equipment.

Cleared kitchen sink drain line obstruction that was causing slow drainage in 100-year-old home. Inspected under-sink P-trap assembly and verified proper function. Traced drainage issue to main waste line and cleared blockage, restoring normal drainage flow.