HVAC & Plumbing Services in Grand Rapids, MI

Completed annual cooling maintenance on 4-year-old EnergiaAir system. Performed comprehensive system inspection including electrical connections, refrigerant levels, and condenser coil cleaning. Inspected and photographed access panel assembly showing normal operational wear; all components functioning within manufacturer specifications and system operating efficiently for continued seasonal use.

Responded to service call for recurring humidifier leak on furnace system. Upon inspection, identified 5-year-old Aprilaire humidifier experiencing third leak failure. Per customer request, removed humidifier unit from furnace to eliminate ongoing water damage concerns. Verified heating and cooling systems remained fully operational after removal. Capped off water supply line and sealed humidifier mounting location on ductwork. Tested furnace operation to confirm proper airflow and system functionality post-removal. Cleaned work area and removed all debris. System left in safe, operational condition without humidification capability.

Completed annual cooling system maintenance and tune-up as part of recurring service agreement. Performed comprehensive inspection of AC unit, checked refrigerant levels, cleaned condenser coils, verified electrical connections, tested thermostat operation, and confirmed proper system cycling. All components found operating within normal parameters with no issues identified.

Completed annual cooling system maintenance and inspection per scheduled 4-year service agreement. Performed comprehensive tune-up including filter check, refrigerant level verification, electrical connection inspection, and condensate drainage system evaluation. Inspected basement-mounted condensate pump and PVC drainage piping, confirming proper operation and drainage flow from HVAC unit.

Responded to water leak from 17-year-old Ruud AC unit that was still providing cooling. Upon inspection, discovered severely corroded and clogged condensate drain line with significant mineral buildup and rust staining throughout the interior of the PVC pipe. Documented conditions with photos showing extent of deterioration inside drain line, then cleared blockage and restored proper drainage to resolve active water leak.

# Annual Cooling Maintenance - EcoAir System (2012) Performed comprehensive annual cooling maintenance on 7-year-old EcoAir unit. During routine inspection, discovered severely deteriorated refrigerant line insulation with extensive foam breakdown and separation from copper piping. The exposed copper refrigerant lines exhibited significant corrosion with pitted surface texture and orange-brown oxidation throughout multiple sections where insulation had completely failed. Documented the compromised refrigerant line condition with detailed photographs showing the extent of insulation failure and resulting pipe corrosion. The black foam insulation had become brittle and was peeling away in large sections, leaving the copper lines vulnerable to environmental exposure and accelerated degradation. Ground-level inspection revealed the lines were subjected to moisture intrusion, as evidenced by water staining on surrounding concrete surfaces and debris accumulation. Completed standard tune-

Completed annual generator tune-up on 7-year-old Generac unit per authorized maintenance schedule. Performed comprehensive inspection of all mechanical components including engine assembly, fuel system connections, and mounting hardware. Inspected flexible fuel line connectors with metal clamps, brass fittings, and corrugated protective sleeves for proper installation and condition. Verified secure mounting of all equipment to rooftop platform, checked cabinet housing integrity, and confirmed all bolts and brackets were properly torqued. All components found in good operational condition with no signs of deterioration or required repairs. Unit tested and operating within manufacturer specifications.

Completed annual cooling maintenance on 10-year-old Goodman air conditioning system. Performed comprehensive tune-up including system inspection, refrigerant recovery procedures, and condensate drain pan servicing. All equipment tested and operating within normal parameters upon completion.

Responded to no cooling call following neighborhood power outage. Upon arrival, inspected 30-year-old air conditioning system and accessed control board compartment. Found unit completely non-operational after power restoration. Evaluated control board, wiring connections, and electrical components for damage from power surge or outage-related issues. System failed to respond to thermostat calls due to age-related component failure exacerbated by power interruption. Advised customer that unit has exceeded typical service life expectancy and replacement is recommended over repair investment.

Completed annual cooling maintenance on 2011 EnergiAir system under 3-year tune-up agreement. Inspected ductwork and condensate drainage system, verified proper operation of all components, and documented equipment condition with photos. All systems functioning within normal parameters.

Completed annual cooling maintenance on residential air conditioning system. Performed comprehensive tune-up inspection including examination of outdoor condenser unit with attention to exterior louvers and ventilation panels. Noted normal weathering and minor debris accumulation on unit exterior consistent with outdoor exposure. Inspected internal housing components and mounting hardware. Documented equipment condition through photographic records. System operational and ready for continued service. Recurring maintenance contract fulfilled per scheduled 10-month service interval.

Completed annual cooling maintenance on 27-year-old ICP air conditioning system. Performed comprehensive tune-up including inspection of all major components, verification of refrigerant charge, electrical connections check, and system operational testing. Unit operating within normal parameters; customer advised of system age and to monitor performance throughout cooling season.

Responded to emergency callback for sewage lift pump system experiencing repeated basement flooding issues. Upon arrival, inspected the lift pump installation and associated discharge piping system. Identified malfunction causing the pump to fail during operation, resulting in sewage backup into the basement area. Performed diagnostic testing on pump motor, float switch assembly, and check valve operation. Addressed the mechanical failure point, verified proper pump cycling, and tested system under load conditions to ensure reliable operation. Confirmed all discharge lines were properly secured and functioning correctly, with no leaks or obstructions present. System restored to full operational status with proper drainage capability established.

Provided project estimate for connecting water supply line to exterior hose bibb at 50-year-old single-family residence. Assessed existing basement plumbing infrastructure including white PVC drainage system with visible corrosion at pipe joints and connections near floor joists. Evaluated routing options from main water supply to proposed outdoor faucet location, considering existing pipe runs along concrete foundation walls and clearances around water heater. Documented current plumbing configuration and structural conditions to determine materials, labor requirements, and optimal installation pathway for new water supply connection.

Provided estimate for replacement of existing Ostate brand water heater, approximately 20 years old. Unit is installed in confined utility closet with vertical exhaust venting through ceiling. Existing installation shows significant age with deteriorated vent insulation, cracked wall surfaces, and worn components throughout. Documented current configuration including flexible water supply lines with shut-off valves and existing venting system for replacement specifications.

Conducted on-site evaluation for furnace and air conditioning system replacement in residential basement utility room. Assessed existing gray metal HVAC unit, including current ductwork configuration with horizontal metallic supply duct and white PVC condensate piping. Documented equipment placement, clearances, and surrounding infrastructure including electrical panel location and available service access. Evaluated structural considerations with exposed ceiling joists and existing utility routing for new system installation planning. Provided comprehensive estimate for complete furnace and AC replacement based on current equipment specifications and installation requirements.

Completed comprehensive water heater tune-up on 15+ year old Grelein unit located in basement utility area. Performed standard maintenance inspection including testing temperature and pressure relief valve, checking all plumbing connections and copper piping for leaks or corrosion, inspecting the galvanized steel sections and fittings, verifying proper operation of shut-off valves, and examining discharge pipe installation. All components found to be functioning properly with no immediate repairs required at this time.

Responded to water leak reported at base of 21-year-old Lennox furnace. Upon inspection, determined leak was originating from condensate pump system rather than furnace unit itself. Photographed mechanical room showing water heater, green-painted piping system, and condensate pump assembly mounted on concrete floor. Examined pump connections and discharge piping for signs of failure or obstruction. Verified furnace heating and cooling functions remained operational despite moisture issue. Documented equipment condition and leak source for further evaluation and repair recommendations.

Conducted on-site assessment for mini split installation in sunroom to provide climate control. Evaluated existing electrical infrastructure including main breaker panel capacity and available circuits to determine power requirements for proposed ductless system. Documented electrical panel configuration and wiring conditions to ensure proper integration of new equipment.

Responded to upstairs shower concerns regarding low water pressure and drainage issues. Inspected bathroom fixtures and plumbing components. Snaked bathtub drain to clear blockage and restore proper water flow. Assessed showerhead performance and water pressure at fixtures. Documented existing conditions of bathtub, drain assembly, and floor drain with chrome overflow plate and standard residential fixtures in working order.