HVAC & Plumbing Services in Grand Rapids, MI

Performed QUOTR-Quoted Repair on HVAC system, replacing faulty component in the blower assembly. Installed new motor with proper wiring connections to control box and verified system operation. All work completed within quoted timeframe with photographic documentation of repair.

Completed relocation of existing plumbing to accommodate new dishwasher installation in 55-year-old residence. Work involved reconfiguring copper supply lines and modifying drain pipe positioning within wall cavity. Installed new shut-off valve for improved accessibility and ensured all connections were properly secured to structural framing.

Performed complimentary tune-up service on two Carrier furnaces (approximately 3 years old) - one located in basement and one in master bedroom. Both units were inspected with panels removed to check electrical connections, motors, and ventilation components. Systems have humidifier installed. All components were found in normal working condition with no issues identified. Both furnaces were returned to service operating properly.

Performed annual heating tune-up on 15-year-old Bryant furnace system with humidifier. Inspected internal mechanical components including mounting brackets, linkages, and ventilation structures. All systems functioning properly with no issues identified.

Inspected 14-year-old York outdoor condenser unit after reported ice damage. Unit appears to be in normal working condition with only minor weathering on the exterior. Determined condenser replacement is not necessary prior to upcoming furnace installation.

Responded to no-heat call for 9-year-old GDM furnace. Upon inspection, identified loose electrical connections at control board causing intermittent operation. Secured all wiring connections and verified proper voltage to components. System now operating normally with consistent ignition and heating cycle.

Successfully completed dishwasher installation in kitchen with oak cabinetry. Verified proper operation and documented installation with photos showing the unit integrated with existing stainless steel appliances. Installation completed as requested with Friends & Family discount applied.

Performed annual heating maintenance on 15-year-old Bryant furnace per Comfort Club membership. Inspected plumbing and ventilation components in basement area including PVC drainage system and HVAC ductwork; all components in good working condition with no visible damage or deterioration. Examined utility room plumbing installation with galvanized steel pipe connected to brass valve fitting and PVC assembly - no leaks or corrosion detected.

Completed annual furnace and humidifier maintenance service for a 6-year-old GDM system. Inspected and documented condition of air filter, which showed normal dust accumulation and will need replacement soon. Examined ductwork connections and control components, confirming proper installation and function of all system elements. All maintenance performed according to manufacturer specifications.

Completed water heater replacement estimate for aging unit (2024 model). Documented existing installation configuration including copper water lines with proper hot/cold connections and surrounding HVAC ductwork. Photographed current mechanical system setup for reference in preparation of replacement proposal.

Completed furnace estimate for customer inquiring about 90% efficiency furnace with humidifier. Inspected existing 16-year-old unit and documented current installation configuration including ductwork, connections, and surrounding mechanical room conditions. Photos taken of system for accurate quote preparation and equipment sizing recommendations.

Performed annual heating maintenance on a 4-year-old GDM furnace. Inspected and cleaned condensate collection tray, which showed signs of mineral buildup and moisture accumulation. System was thoroughly evaluated and serviced according to manufacturer specifications.

Conducted comprehensive estimate for replacement of 16-year-old AC system. Inspected both the indoor air handler located in basement utility room and outdoor condensing unit positioned within fenced enclosure adjacent to house. Documented current system condition with photographs for assessment purposes.

Performed annual heating tune-up on 16-year-old Fraser-Johnston furnace with CM model 2026. Documented significant corrosion with multiple perforations on heat exchanger surface, indicating critical safety concern. Recommended immediate replacement due to carbon monoxide risk.

Performed Annual Heating Visit on 13-year-old Bryant furnace. Inspected intake venting for blockage and completed comprehensive tune-up. Identified humidity concerns and documented system condition with photos showing furnace location in basement utility area with proper PVC venting but limited clearance due to surrounding storage items.

Responded to service call for Carrier system (22 years old) with thermostat reset issues. Ecobee had previously suggested insufficient airflow as potential cause. Inspected system and confirmed customer had switched from MERV 13 to MERV 8 filter which had improved the situation. Verified proper airflow with current filter installation and explained importance of maintaining appropriate filtration level to prevent restricted airflow while ensuring adequate system protection.

Performed annual heating tune-up on 1-year-old EnergiAir furnace (Model WT 09-2034, manufactured 2018). Inspected filter assembly and interior components, verified proper installation of diamond mesh filter in housing, and examined wiring connections. System functioning normally with no issues identified.

Responded to service call for an 8-year-old Bryant unit damaged by fallen ice. Inspected outdoor heat pump/AC unit mounted on exterior wall stand and found impact damage. Documented condition with photos showing unit positioning against stone foundation wall with visible PVC connections and electrical conduit. Unit requires replacement parts due to ice damage.

Performed annual heating maintenance on two furnaces and humidifier. Found severely clogged humidifier filter with significant mineral buildup and dust accumulation. Cleaned and serviced evaporator coil which showed extensive dirt contamination that was restricting proper system operation. Both components showed signs of neglected maintenance that could impact system efficiency and air quality.

Successfully completed add-on air conditioning installation with new furnace/air handler unit in basement. Installed complete metal ductwork system with proper sealing at all junction points. Established exterior electrical connections with junction box mounted to vinyl siding, including all necessary conduit and wiring.