HVAC & Plumbing Services in Grand Rapids, MI

Successfully installed new gas line from basement to kitchen stove location, including proper appliance connector and shut-off valve as quoted. Completed installation in basement with exposed piping properly secured to joists, ensuring safe connection to the stainless steel cooktop with four burners.

Performed annual heating maintenance on two 8-year-old Rheem furnaces. Inspected and serviced both associated humidifiers (Aprilaire system observed). Verified proper operation of Totaline control panel and checked all system functions. All equipment running within normal parameters.

Responded to water leak service call for 9-year-old Carrier unit with warranty through 11-2026. Diagnosed severe frost buildup on evaporator coil causing water leakage while furnace continued heating operation. Identified significant mineral scale accumulation on components. Defrosted system and performed necessary cleaning to restore proper operation.

Successfully completed furnace installation in basement utility room. Installed new two-stage furnace unit with proper ductwork connections, including metallic elbow air ducts and PVC condensate drainage system. System includes an integrated whole-house humidifier mounted on the furnace side panel.

Conducted furnace assessment and identified failed heat exchanger on 15-year-old unit. Documented existing ductwork condition and reviewed previous repair history, noting recent gas valve replacement. Presented replacement options to client, including recommendation for comprehensive system upgrade due to age of equipment and safety concerns. Offered complimentary annual furnace tune-up as part of service package.

Successfully completed installation of a new Bradford White water heater with circulation pump in utility area. System features copper supply lines with brass fittings and valves, properly connected to existing plumbing. Furnace replacement was also completed as part of the comprehensive HVAC system upgrade.

Diagnosed and repaired sink leak at garbage disposal connection. Inspected under-cabinet plumbing system including PVC drainage pipes and copper supply lines. Resolved issue by properly sealing disposal unit connections, eliminating the leak that customer reported had been occurring for two days.

Successfully installed an Aprilaire 600 Manual humidifier on customer's HVAC system in basement. Unit was properly mounted to the furnace with galvanized ductwork connections and wired to the wall-mounted humidistat. Completed necessary plumbing connections to water supply line using copper fittings and insulated piping per manufacturer specifications.

Successfully installed a new Bradford White water heater in utility room, replacing existing unit. Completed all necessary plumbing connections including copper inlet/outlet lines and installed proper control valve. System is operational with all connections secure.

Performed annual heating maintenance on 1-year-old EnergiAir furnace (Model: WT 05-2033). Inspected plumbing components, sump pump system, and electrical connections. No issues detected during the comprehensive tune-up service.

Performed annual maintenance tune-up on 18-year-old Goodman furnace. System was functioning properly with no issues detected. Inspected water heater installation and ventilation system, noting proper connections and venting. All components are in working order with no repairs needed at this time.

Responded to emergency no-heat call. Inspected blower motor assembly and found inducer motor had failed. Replaced defective inducer motor assembly, cleaned connections, and verified proper operation of heating system with successful test cycle.

Responded to gas leak concern following previous furnace tune-up. Inspected 6-year-old water heater and furnace system with exhaust ventilation. No active leak detected; verified proper operation and safe gas levels throughout system.

Responded to no-heat call for 17-year-old Lennox system. Inspection revealed failed inducer motor assembly with worn belt. Replaced inducer motor and restored heating function to normal operation.

Completed annual humidifier service on Aprilaire whole-home humidification system. Inspected and replaced humidifier filter with new media pad as part of scheduled maintenance. System functioning properly after service with no issues identified.

Installed whole-home humidifier system with automatic humidity control. Set up copper water supply line with shutoff valve in utility area. Connected unit to existing HVAC ductwork and verified system operation with digital control panel displaying humidity reading of 38%. Technician Gavin scheduled to return for automatic humidity control installation.

Responded to no heat call for 15-year-old York furnace. Diagnostic inspection revealed a malfunctioning control board with visible dust accumulation and compromised wire connections. Cleaned connections, replaced control board, and verified proper system operation with heat functioning normally.

Responded to inspector correction by rerouting sump pump drain line to sanitary drain system. Installed condensate pump with integrated GFCI combo plug and added proper drain trap to ensure code compliance. System now properly drains from the Daikin HVAC equipment in basement utility room without risk of backflow.

Completed annual heating maintenance service on furnace and humidifier. Performed thorough inspection of system components including housing and electrical connections. Took detailed photos of equipment for documentation purposes.

Performed diagnostic on unit with pressure switch fault. Identified defective pressure switch requiring replacement. Created QUOTR for parts and scheduled return visit for pressure switch replacement. Photos taken of existing wiring configuration to ensure proper installation during follow-up service.