HVAC & Plumbing Services in Grand Rapids, MI

Completed annual cooling maintenance on residential AC system less than 10 years old. Performed comprehensive tune-up including inspection of capacitor, electrical connections, and system components; noted minor corrosion on terminal block and typical outdoor equipment wear with debris accumulation in enclosure. All system components tested and operational upon completion.

Completed annual cooling maintenance inspection on residential air conditioning system as part of 5-year service agreement. Performed standard tune-up procedures including system diagnostics, refrigerant level verification, electrical connection inspection, and condenser coil cleaning. All components tested within normal operating parameters and unit is ready for the cooling season.

Completed annual cooling maintenance on 2023 Carrier system. Performed comprehensive tune-up including inspection of all interior mechanical components, condensate pump assembly, refrigerant lines, drainage system, and electrical connections. All components photographed and found operating within normal parameters; system ready for cooling season.

Completed annual cooling maintenance on 29-year-old Amana air conditioning system. Per customer request, thoroughly cleaned and serviced humidifier unit that was previously overlooked during last tune-up. Performed standard AC tune-up procedures including system inspection, filter check, and operational testing to ensure proper cooling performance for the season.

Responded to active plumbing leak originating from toilet fixture with water intrusion into basement area. Upon inspection, identified corroded copper supply line with significant oxidation and patina buildup at joint connection point in crawl space above affected area. Replaced deteriorated copper piping and installed new braided stainless steel flexible supply line with chrome fittings, ensuring proper connection to shut-off valve and fixture. Verified all connections were secure and leak-free, tested water flow, and confirmed no further water intrusion into basement space.

Completed annual cooling maintenance on EnergiAir system with 2023 condenser model. Inspected outdoor unit ventilation louvers and found them functioning properly with minor surface wear on yellow-green painted housing. Documented significant moisture condensation buildup on upper equipment surfaces and extensive rust corrosion on horizontal metal brackets and mounting components, indicating prolonged exposure to moisture and potential drainage issues. Recommended monitoring unit for continued corrosion progression and consideration of rust remediation to prevent structural deterioration of affected components.

Completed annual cooling maintenance on split-system air conditioning unit. Opened and inspected condenser unit, accessing compressor, refrigerant lines, and fan assembly. Noted significant dirt and debris accumulation in unit base and around compressor requiring cleaning. Documented internal component condition with photographs showing copper refrigerant lines, condenser fan motor, and compressor assembly. All major components accessible and operational at time of inspection.

Completed full HVAC system replacement including outdoor condensing unit and indoor air handler. Installed new Carrier condensing unit on existing concrete pad with proper refrigerant line connections and electrical conduit routing along exterior wall. Replaced indoor furnace and air handler assembly in basement mechanical room with new Carrier equipment. Installed PVC condensate drainage piping and connected all ductwork to new system. Verified proper refrigerant charge, tested all electrical connections, and confirmed system operation. Unit operating within manufacturer specifications upon completion.

Conducted on-site assessment of existing bathtub-shower combination unit for conversion to walk-in shower installation. Documented current bathroom configuration including white fiberglass tub surround, chrome fixtures, grab bar placement, and vanity positioning. Photographed existing plumbing connections, shower valve assembly, and tub drain location to prepare specifications for tub removal and barrier-free shower replacement.

Responded to service call for 2017 Bradford water heater with inadequate hot water temperature despite pilot light functioning properly. Upon inspection, measured outlet temperatures at multiple fixtures throughout the residence. Kitchen sink registered 119°F and utility sink measured 121°F, both significantly below the recommended 120-140°F range for optimal domestic hot water usage. Verified pilot light operation and burner ignition. Adjusted temperature control setting on gas valve to increase water temperature output. Tested system operation through multiple heating cycles to ensure proper burner response and temperature recovery. Educated customer on proper temperature settings and monitoring procedures for future reference.

Completed full residential HVAC system replacement including installation of new Amana furnace unit in basement utility room with proper venting configuration using white PVC intake and exhaust pipes. Installed new air handler with refrigerant line connections and integrated system with existing metallic ductwork for whole-home air distribution. Mounted new outdoor condensing unit on concrete pad with appropriate clearances, connected electrical conduit and refrigerant lines to foundation penetration, and placed unit on gravel base for drainage. All equipment properly labeled with manufacturer specifications and safety warnings. System tested and verified operational upon completion.

Completed annual cooling maintenance on two systems: a 10-year-old Amana unit and a 7-year-old Bryant unit. Performed comprehensive tune-ups on both systems including filter replacements per customer request, inspected electrical connections, checked refrigerant levels, cleaned condensate drains, and verified proper operation. Documented significant rust staining observed on wall-mounted panel near PVC condensate drain system, indicating potential moisture concerns that may require future attention.

Completed annual cooling maintenance on 26-year-old Lennox air conditioning system. Performed comprehensive system inspection, connected diagnostic gauges to measure refrigerant pressures and temperatures, tested electrical components including capacitor, and verified proper operation of all system functions. Unit operating within normal parameters at time of service.

Completed annual cooling system maintenance and tune-up on a 6-year-old unit with warranty coverage extending to February 2030. Inspected heat exchanger fins and coils, which showed normal wear consistent with age and environmental exposure, documented system condition with photos for service records. All components operating within normal parameters upon completion of preventive maintenance procedures.

Responded to complaint of loud clanking noise from furnace system. Performed thorough inspection of EnergiAir unit, examining blower assembly, heat exchanger, and ductwork for loose components or foreign objects. Upon investigation, verified all mounting hardware was secure, confirmed blower wheel was properly fastened and balanced, and found no debris in air handler or duct system. Inspected control board connections, pressure switches, and electrical components for proper operation. Unit tested and cycled through normal heating operation with no abnormal sounds detected at time of service.

Successfully completed add-on air conditioning system installation. Installed new Carrier condensing unit on concrete pad against exterior brick wall with proper clearances maintained. Unit positioned with adequate access for future service and airflow requirements. Mounted electrical disconnect box on brick wall with appropriate conduit routing to equipment. Ran refrigerant line set through wall penetration using insulated copper tubing with weather-resistant flexible conduit protection. Connected all electrical components per manufacturer specifications and local code requirements. Verified proper drainage and condensate line routing. System tested and confirmed operational with appropriate refrigerant charge and airflow measurements within acceptable parameters.

Responded to multiple plumbing concerns in a 35-year-old residential property. Addressed basement bathroom faucet leak by inspecting undermount sink with chrome single-handle faucet and examining cabinet plumbing connections including P-trap assembly, supply lines, and shut-off valves. Verified proper drainage function and checked for any additional leaks in the vanity plumbing system. All fixtures photographed and documented for service records.

Responded to cooling complaint regarding system not maintaining thermostat setpoint on 9-year-old Lennox air conditioning unit. Performed diagnostic inspection of HVAC system in basement utility area. Utilized borescope camera equipment to conduct internal inspection of ductwork and system components to identify potential airflow restrictions or mechanical issues. Documented equipment conditions and system configuration including condensate drainage lines, mechanical connections, and air handler assembly. Investigation revealed need for further assessment of system performance and capacity relative to cooling load demands.

Completed comprehensive AC tune-up service on EnergiAir system. Performed standard maintenance inspection of indoor unit, verified condensate drain pan and pump operation with proper drainage function, and confirmed all electrical connections secure. System operating within normal parameters with no issues identified.

Completed annual preventative maintenance tune-up on GENERAC WT 8-2030 standby generator unit per GENPLAN recurring service agreement. Performed comprehensive inspection of all internal components including engine assembly, fuel system with filters and valves, exhaust ducting, control panel indicators, and electrical connections. Verified proper operation of all mechanical systems, confirmed control panel functionality with multi-colored indicator display readings within normal parameters, and documented unit condition through photographic records showing clean, well-maintained components with no visible damage or deterioration requiring immediate attention.