Top-Rated HVAC & Plumbing Services in Kalamazoo, MI

Completed annual heating maintenance service on a 7-year-old EnergiAir furnace and Aprilaire humidifier. Performed standard tune-up procedures on both units, which were found to be operating within normal parameters. System includes an A.O. Smith 40-gallon water heater (Model G6-PVT40500V) that was visually inspected during the service visit.

Successfully installed powered anode rod in customer's water heater. Connected electrical components properly and verified system functionality with digital testing equipment. No leaks observed at connection points.

Successfully completed installation of new Carrier furnace and AC system. Installed outdoor condenser unit on ground level with proper line connections to the home. Set up indoor furnace unit with appropriate metal venting components and connected all necessary electrical and control systems.

Completed annual heating maintenance on Carrier furnace (model WT 01-2029) and humidifier. Inspected Richmond water heater installation which appears in good condition with proper connections. Documented service with photos for quality assurance purposes.

Responded to service call for a 16-year-old furnace that was shutting off prematurely after short periods of normal operation. Inspection revealed significant frost buildup on the refrigerant lines and evaporator coils, indicating restricted airflow. Cleaned cooling fins and removed corrosion from connection points to restore proper system function.

Successfully replaced the inducer assembly in the HVAC system. Installation included proper wiring connections of the multicolored wires to the control board and ensuring secure mounting of the new motor component. System tested and confirmed to be operating correctly.

Performed comprehensive tune-up on Armstrong Ultra SX 80 high efficiency furnace. System was inspected, cleaned, and tested for proper operation with blue indicator light confirming normal function. Filter maintenance was reviewed and unit is operating at optimal efficiency.

Returned to diagnose persistent humidistat solenoid issue as per quoted repair. Inspected control board connections and wiring harness, with focus on the actuator assembly that services the humidistat system. Documented electrical pathways and component conditions for further diagnosis as requested.

Responded to service call for a Kenmore pellet-type water softener reported as potentially malfunctioning for several months in a side-by-side condo. Upon inspection, the unit appeared properly installed with all plumbing connections intact and no visible signs of damage or leakage. Visual assessment included examination of the digital control panel, copper pipe connections, valve functionality, and drainage system.

Responded to water leak issue following recent tune-up. Identified activated leak sensor in drain pan that triggered system shutdown. Inspected internal components including control mechanism with blue indicator and associated wiring connections. System restored to proper operation after resolving drainage issue.

Completed installation of new water lines to replace severely corroded and leaking galvanized pipes observed in stairwell area. Successfully installed new shower valve, kitchen sink faucet, and pedestal sink with faucet as specified in project scope. All new plumbing components were properly secured, tested for leaks, and confirmed operational before job completion.

Conducted water heater assessment for a family of 6 at property owned by Hope Church of Kalamazoo. Evaluated existing Rheem Professional unit showing signs of deterioration and documented current installation with copper piping and PVC drain configuration. Prepared estimate for replacement with larger capacity water heater to accommodate household needs, along with separate quote for unrelated plumbing re-route work as requested.

Successfully installed an Aprilaire humidifier with manual control on the first floor HVAC system. Connected copper water lines with isolation valves for proper water supply to the unit. Mounted the humidifier to the furnace plenum and verified proper drainage and electrical connections to ensure optimal humidity control.

Responded to urgent no-heat call where carbon monoxide detector was alarming. Inspected Bryant furnace (5 years old) and found significant dust accumulation on control board causing system malfunction. Thoroughly cleaned control board connections and verified proper operation of all safety controls. System now operating normally with no CO issues detected.

Successfully installed a new furnace and Bradford White water heater in customer's utility room. Completed all necessary connections to existing ductwork and plumbing systems, including proper venting with 90-degree elbow pipes. Both units were tested for proper operation and all installations meet current code requirements.

Performed scheduled complimentary furnace tune-up on customer's 2-year-old EnergiAir WT 07-2034 system (CM: 2023). Visual inspection confirmed proper installation of furnace unit with connected ductwork and condensate drainage system. System was fully operational with no issues detected or repairs needed.

Identified and repaired a kitchen sink drain leak that was traveling behind a plaster wall into the basement. Inspection revealed water was only present during sink drainage, with evidence of water staining on the basement foundation wall below the affected drain line. Replaced damaged section of PVC drain pipe and sealed all connections to eliminate leakage.

Relocated yellow corrugated gas line that was interfering with cabinet installation. Properly reconnected line to existing valve and verified secure connection to HVAC equipment. Final inspection confirmed no leaks and proper gas flow to unit.

Performed scheduled annual heating tune-up on 7-year-old Payne furnace. System is operating correctly with no reported heating issues. Inspected mechanical components including circulation ports and connections, confirming proper functionality of the 10-year-old unit. No service concerns identified.

Responded to emergency service call for ice damage to outdoor AC unit. Upon inspection, discovered substantial ice accumulation on condenser top surface resulting from apparent ice fall from above structure. Documented pre-existing damage with photos for insurance claim purposes. Unit requires replacement of damaged condenser coil and protective grille assembly. Provided documentation for warranty claim under ENE WT 4-2034.