Plumbing and Electrical Services
Lansing Service Overview
- Lansing’s Older Home Experts: Specialized HVAC, plumbing, and electrical for 1940s–1970s home layouts.
- Comprehensive Local Service: Expert repairs from Old Town to Waverly that fix the problem right the first time.
- Maximizing Your Savings: We help you navigate local BWL rebates and energy-efficient upgrades.
Lansing runs on tight corridors and older housing, and that is exactly why Vredevoogd is here every day. We have been serving Lansing homeowners for years, working up and down Cedar Street, across I-496, and through neighborhoods from Old Town down through REO Town and out toward Waverly. Homes near Waverly Road and streets like Kalamazoo regularly deal with aging furnaces and AC systems that struggle to keep up. We handle hundreds of heating and cooling calls across Lansing every year, many in homes built decades ago that need experienced service to fix the problem right the first time. Call Vredevoogd at 844-482-2365 or schedule service online today.
Serving Lansing Homes with Real Experience
Lansing is not a uniform housing market. It is a mix of post-war builds, mid-century ranch homes, and older two-story houses that were never designed for modern HVAC demands.
We have been working in Lansing homes for years, and we know exactly what that means in the field. Many homes here were built between the 1940s and 1970s, and that shows up in every service call. Older ductwork, aging furnaces, and retrofitted AC systems are standard across neighborhoods from Old Town to the west side near Waverly and Delta Township.
Drive down Oakland Avenue or cut across Saginaw Highway, and you will see the same pattern. Tight mechanical rooms, undersized returns, and airflow issues that have built up over time. Near Michigan State University and the East Lansing border, you also have rental properties where systems run hard year-round, and maintenance is often delayed.
We walk into these homes already knowing what to look for. That saves time, and it leads to better outcomes.
Get expert HVAC, plumbing, and generator services in Lansing. Contact us today to schedule your appointment.
“Spencer S. and Alex B. did an excellent job installing our new furnace and A/C unit. They were professional and courteous throughout the day. I definitely plan to use Vredevoogd again and highly recommend the company.”
24/7 Emergency HVAC Services
At Vredevoogd, we know HVAC problems don’t always happen when it’s convenient. That’s why we offer 24/7 emergency services, so you can count on us when you need us most.
Furnace Service in Lansing, MI
Heating in Lansing is constant and unforgiving. Systems run for months without a break, and when a cold front moves through Mid-Michigan overnight, failures stack up fast.
In REO Town and similar older neighborhoods, no-heat situations often come from furnaces that have been patched together over the years. That pattern shows up often across Lansing. Many Lansing homes still rely on older natural gas furnaces or systems that have been modified multiple times.
In areas just south of Michigan Avenue and throughout established neighborhoods, we regularly see airflow restrictions, aging heat exchangers, and systems that were never sized correctly for the home.
We help Lansing homeowners with:
- Furnace repair during peak winter demand
- Full system replacement for aging or inefficient units
- Preventative maintenance before winter hits
- Heat pump installation for improved efficiency
When temperatures drop into the teens, older systems fail first. We focus on identifying those weak points early so you are not dealing with an emergency in the middle of winter.
“New furnace installation. These gentlemen were very knowledgeable and without hesitation to answer any questions. I tried to limit to a few questions and was very satisfied with all the installation. They were quite clean and careful, and most of all a great product and pricing. I compared other companies. These gentlemen knew what they were doing, and I’m certainly going to referral. Thanks again for your service. It’s greatly appreciated.”
Air Conditioning Service in Lansing, MI
Air Conditioning in Lansing is not just about lowering the temperature. It is about controlling humidity and airflow in homes that were not designed for central AC. Homes near Adado Riverfront Park and along the Grand River often deal with constant humidity issues. That is typical in these parts of Lansing. Moisture builds up fast, and older systems struggle to keep up.
Across Lansing, especially in older neighborhoods and homes near campus, many AC systems were added later. That leads to undersized equipment and uneven cooling.
We handle:
- AC repair when systems cannot keep up with heat and humidity
- New AC installation with proper sizing for Lansing homes
- Ductless systems for additions and older layouts
- Maintenance to improve airflow and efficiency
If your system runs all day but your home still feels humid, it is usually a sizing or airflow issue. That is one of the most common AC problems we solve in Lansing.
Air Quality Services
Maintaining good indoor air quality is essential for your health and comfort. Vredevoogd offers various air quality services, including installing and maintaining humidifiers. Our solutions help reduce allergens, control humidity, and give clean, breathable air throughout your home.
Join Our Comfort Club Today
Join our Comfort Club to enjoy exclusive benefits and peace of mind all year round. Members receive priority service, regular maintenance visits, and discounts on repairs and replacements. Our Comfort Club helps keep your HVAC systems running efficiently and saves money.
Common Lansing Home Challenges
“My furnace won’t turn on during a cold snap.”
Lansing winters are unforgiving. We troubleshoot aging heat exchangers common in homes near Michigan Ave and Kalamazoo St.
“Why is my house so humid even with the AC running?”
Older Lansing homes often have undersized ductwork. We fix cooling systems that struggle with humidity near the Grand River.
“My breakers keep tripping when I run the microwave.”
Many Lansing properties have original panels not built for modern demands. We provide upgrades for older layouts in South Lansing.
Plumbing Services in Lansing, MI
Plumbing problems in Lansing are tied directly to the age of the homes. Older infrastructure means more frequent issues and more complex repairs. In Old Town and the surrounding areas, it is common to find basements with original plumbing lines mixed with newer updates. That combination shows up across much of Lansing.
In areas near downtown, REO Town, and along the Grand River corridor, we regularly see aging pipes, outdated fixtures, and water heaters that are well past their expected lifespan. Freeze-thaw cycles only make those problems worse, especially in older basements.
We also help homeowners take advantage of local programs like BWL rebates when upgrading equipment, which can make a noticeable difference in overall cost.
We provide:
- Plumbing repairs for leaks, clogs, and failing fixtures
- Water heater installation and repair, including tank and tankless systems
- Sump pump services for homes dealing with groundwater
- Sewer and drain solutions for older systems
Dependable Generator Services
Make sure your home remains powered during outages with our dependable generator services. Vredevoogd specializes in installing and repairing residential generators, providing a reliable backup power source. Our team will help you choose the right generator for your needs and install it correctly. Keep your home running smoothly with our expert generator services.
The Vredevoogd Difference
We don’t just see a model number; we see the neighborhood. We know the tight mechanical rooms of Westside ranches and the retrofitted systems of East Lansing rentals. We arrive knowing exactly what challenges your specific Lansing home will present.
Electrical Services in Lansing, MI
Electrical systems in Lansing homes follow the same pattern as HVAC and plumbing. Many properties were built decades ago and have been updated in stages, which often leads to overloaded panels, outdated wiring, and inconsistent performance.
Along corridors like MLK Jr Boulevard and Pennsylvania Avenue, and in areas such as South Lansing, Groesbeck, and the Frandor side of town, it is common to find panels that were never designed for today’s electrical demand. Out toward Waverly and Delta Township, we also see homes where additions and upgrades have been tied into older wiring, creating inconsistent power and breaker issues.
We help Lansing homeowners with:
- Electrical panel upgrades to handle modern demand
- Wiring updates and repairs for older homes
- Outlet and switch installation or replacement
- Lighting upgrades and troubleshooting
- Whole-home electrical inspections for safety and performance
If you are noticing flickering lights, tripped breakers, or inconsistent power, those are common signs in older Lansing homes that the electrical system needs attention. Addressing these issues early helps prevent larger problems and keeps your home running safely.
Call Your Lansing HVAC and Plumbing Team Today
Vredevoogd is Lansing’s go-to HVAC, plumbing, and generator services provider for our commitment to quality, reliability, and customer satisfaction. Our technicians undergo rigorous training and background checks to provide the best service possible.
To make our services accessible, we offer free replacement estimates and various financing options. Military and veteran discounts are available to honor those who have served our country.
Schedule HVAC, plumbing, and generator services in Lansing, MI, with Vredevoogd today.
“Had this company out to my house, needed AC for the first time installed. My furnace was very old, about 35 years. They still offered to install the AC with the old furnace, but we went ahead and got both a new AC and HVAC system. Works amazing. We also got a rebate back from BWL. Our house gets warm or cool super fast when we adjust the thermostat. The price was worth having professional, nice service members, timely installation, and no problems. I trust this business and plan to use them for future updates.”
Lansing Home Services FAQ
What are the most common HVAC issues in older Lansing homes?
Does Vredevoogd offer emergency repair services in Lansing?
Can I get rebates for upgrading my furnace or AC in Lansing?
Why is the second floor of my Lansing home always warmer than the first?
Can you upgrade electrical panels in homes over 50 years old?
Recent Jobs and Reviews in Lansing, MI
Job Locations and Reviews
Completed electrical service upgrade at residential property under permit PE26-0411. Coordinated utility company power disconnect and reconnect (work order #88646) to safely perform main service panel replacement. Successfully upgraded electrical service infrastructure, passed municipal inspection, and restored power to residence same day. Homeowner was notified of scheduled power outage and work was completed with full code compliance.
Responded to service call for non-operational Honeywell water heater with 7-flash error code in flooded basement. Upon arrival, found 9-year-old unit with standing water around base. The 7-flash diagnostic code indicated a gas control valve failure requiring immediate attention. Assessed both the primary water heater and adjacent Bradford White unit for flood damage. Documented equipment condition, manufacturer labels, and installation configuration including copper supply lines, gas piping, and venting system. Photographed EnergyGuide labels, control assemblies, and basement utility area showing water damage on concrete floor. Recommended gas valve replacement or full unit replacement based on age and flood exposure to electrical components and insulation.
Conducted site evaluation of outdoor air conditioning condenser unit to assess relocation options for upcoming exterior home remodeling project. Documented current installation configuration including unit positioning against vinyl siding, electrical conduit routing, refrigerant line set configuration, and concrete pad placement. Photographed existing setup showing condensate drain line, power supply connections, and clearance measurements from structure. Discussed temporary relocation procedures with client, explaining that unit can be moved short distances by extending refrigerant lines and electrical connections, or alternatively can be temporarily disconnected and relocated to adjacent area with proper line set protection and electrical safety measures during construction period. Advised on importance of maintaining proper clearances, level pad placement, and protection of refrigerant lines during any relocation work. Recommended scheduling air conditioning performance check follow
# Furnace No-Start Diagnosis Responded to service call for 16-year-old furnace experiencing startup failure with humming noise and blower cycling issues. Upon arrival, unit attempted ignition sequence but shut down before completing startup cycle. Performed diagnostic inspection of furnace components including blower motor, control board, and ignition system. Examined condensate drain system and identified potential blockage concern at floor drain termination point where debris accumulation was present. Cleared obstruction from drain assembly to ensure proper condensate evacuation. Verified all safety switches, pressure switches, and flame sensor operation. Unit successfully completed full heating cycle after service intervention. Recommended ongoing maintenance to prevent future drainage issues that could trigger safety lockouts.
# Gas Line Installation for Outdoor Heater ## Work Performed Installed new gas line routing from existing utility connections to exterior location for outdoor heater installation. Project required 6 hours of labor with helper assistance to complete full installation and testing. ## Technical Details Accessed existing gas supply infrastructure in basement/utility area where main plumbing assembly and water heater connections are located. Evaluated existing pipe configuration including pressure relief valves, copper supply lines, and PVC drainage systems to determine optimal tie-in point for new gas line branch. Routed new black iron gas pipe from supply point through crawl space/basement ceiling area, navigating around existing HVAC ductwork, electrical wiring, and structural floor joists. Drilled penetrations through subfloor as needed to accommodate pipe routing to exterior wall location. Secured gas line to floor joists using appropriate hangers and supports, maintaining proper
Completed full air conditioning system replacement at residential property. Installed new Lennox AC condenser unit on exterior concrete pad with proper refrigerant line connections and electrical hookup to existing furnace system in basement. System tested and verified operational with all connections secured and equipment running within manufacturer specifications.
Successfully installed a 40-gallon natural gas water heater (6-year warranty, short model) in basement utility room. Completed all plumbing connections using copper and galvanized steel piping with proper fittings and elbows, secured vertical copper lines with metal support straps, and ensured proper venting configuration. Unit installed adjacent to existing HVAC furnace with all connections tested and verified operational.
Completed annual cooling maintenance on residential AC system under 3-year equipment warranty agreement. Performed standard tune-up procedures including inspection of condensate pump assembly in basement utility area, verified proper drainage operation, and confirmed all mechanical components functioning within normal parameters. System operational and ready for cooling season.
Completed annual cooling maintenance on 17-year-old Goodman air conditioning system. Performed standard tune-up procedures including inspection of all major components, verified system operation, and documented equipment condition with photos. Unit is operational and ready for the cooling season.
Completed full furnace replacement with installation of new Carrier gas furnace unit in residential basement location. Connected metallic supply ductwork with horizontal trunk line and elbow joint to existing distribution system. Installed unit against brick wall with proper clearances, secured all ductwork connections, verified proper venting, tested system operation, and confirmed heating functionality upon completion.
Responded to complaint of toilet running continuously after flushing in residential bathroom. Upon inspection, found worn and deteriorated flapper valve failing to properly seal against flush valve seat, allowing water to leak from tank into bowl. Flapper exhibited typical age-related degradation consistent with original 1998 installation. Replaced defective red rubber flapper with new universal flapper assembly, ensuring proper chain length and alignment with flush valve opening. Tested flush mechanism multiple times to confirm proper sealing and cessation of running water. Verified fill valve operation and water level adjustment. Toilet now functioning properly with no continuous running between flush cycles.
Responded to service call for toilet evaluation and replacement estimate. Upon arrival, conducted thorough inspection of existing toilet fixture in bathroom. Documented current condition of white porcelain toilet with standard tank and flush mechanism. Assessed installation area, noting corner placement, existing water supply line connection, and tile flooring configuration. Photographed toilet and exterior building access point for estimate documentation. Provided client with assessment findings and replacement options for one to two toilet fixtures as requested.
Responded to no heat call on 10-year-old Trane furnace. Upon arrival, confirmed unit was not producing heat and supply air temperature at room temperature. Inspected burner assembly and found pilot light/ignition system not functioning. Examined control board and wiring connections, discovering evidence of moisture intrusion and corrosion on primary control module and wire terminals. Brown discoloration visible on white plastic connector block indicated prolonged exposure to moisture. Cleaned corroded terminals, verified all wire connections were secure, and tested control board functionality. Cycled unit through heating sequence to confirm proper ignition, burner operation, and heat output. Verified supply air temperature rising appropriately and system operating as designed.
Completed full HVAC system installation including indoor air handler unit and outdoor condensing unit. Indoor unit mounted on drip pan in basement with proper condensate drainage piping, connected ductwork, and all necessary PVC venting. Outdoor condenser positioned on concrete pad with gravel base, electrical disconnect installed, line set concealed with protective covering, and refrigerant lines connected to indoor unit. All components installed per manufacturer specifications with proper clearances, secured mounting, organized piping runs along exterior siding, and system tested for proper operation.
Responded to carbon monoxide alarm call and performed comprehensive safety assessment of the residence. Utilized combustion analyzer to test for CO levels and natural gas leaks throughout the property, with readings indicating 1 PPM CO and 80.7% combustion efficiency on natural gas appliances. All measurements were within safe operating parameters, and no immediate hazards were detected.
Completed full air conditioning system replacement including outdoor condensing unit and indoor air handler components. Installed new Carrier outdoor unit on existing concrete pad with proper refrigerant line connections, service valves, and line insulation. Connected system to existing furnace infrastructure in basement mechanical room with appropriate PVC condensate drainage and verified all electrical connections, refrigerant charge levels, and system operation per manufacturer specifications.
Responded to service call for low hot water pressure affecting kitchen and shower fixtures following recent water heater installation. Upon inspection, identified recurring issues with the newly installed system and documented existing plumbing infrastructure conditions, including visible sediment accumulation and staining on PVC waste lines. Assessed water heater performance and pressure delivery to affected fixtures to determine root cause of inadequate hot water flow.
Completed annual cooling maintenance and tune-up on outdoor air conditioning condenser unit. Upon arrival, found unit operational but with accumulated debris on condenser coils and biological growth on concrete pad. Performed comprehensive system inspection including electrical connections, refrigerant pressures, and amperage draws. Cleaned condenser coils to remove dirt, leaves, and outdoor debris that had reduced airflow efficiency. Verified proper fan motor operation and lubricated as needed. Checked refrigerant charge and confirmed system pressures within manufacturer specifications. Inspected and tightened all electrical connections. Tested capacitor performance and found within acceptable range. Verified proper drainage and cleared area around unit of excessive vegetation and debris. System tested successfully with proper cooling operation confirmed. Unit left in good working condition with improved airflow through cleaned coils, ensuring optimal performance for the cooling seaso
Performed refrigerant leak search on HVAC system. Inspected evaporator coil and refrigerant line connections, identifying oxidized copper tubing with visible corrosion and patina buildup on U-bend sections. Documented equipment condition with photos showing weathered components and potential leak points for further evaluation and repair recommendations.
Completed annual cooling system maintenance and inspection. Verified operation of condensate pump with green indicator light functioning properly, checked PVC drainage lines and connections for proper flow, and inspected mechanical equipment area including all associated piping, electrical connections, and system components. All equipment operating within normal parameters with warranty coverage extending through May 2035.