Top-Notch HVAC, Plumbing & Generator Services in Rockford, MI

Responded to callback for intermittent system failure on Energiair heat pump system with Honeywell HZ322 zoning control. Customer reported unit repeatedly stops operating and requires manual reset to restore function. Upon arrival, inspected outdoor unit electrical components including control board, wiring connections, and capacitor. Verified proper connections at twist connectors and examined refrigerant line connections. Evaluated zoning panel operation showing Zone 1 active with heat call. Retrieved parts from supply house to address recurring failure. System has been cycling properly at constant 73-degree setpoint since customer discontinued precooling schedule. Addressed customer concerns regarding previous service attempts and current system reliability issues.

Performed routine preventative maintenance on 18kW whole house standby generator. Completed full system inspection including visual examination of all mechanical components, blower assembly, and valve fittings. Verified proper operation of all systems with no issues identified. Updated maintenance tag documenting 109 operating hours and current service date. Unit tested and left in operational condition.

Responded to service call for AC system producing thunk noise during shutdown cycle. Inspected Carrier furnace unit and associated HVAC components in mechanical room, including air handler, ductwork connections, and mounting hardware. Documented equipment installation and configuration with photos showing furnace positioned on drain pan, PVC vent piping, metal ductwork, and air handler cabinet. System operational with no other reported issues; thunk noise likely attributed to ductwork expansion/contraction or relay operation during compressor shutdown sequence.

Completed annual cooling maintenance on 14-year-old Carrier condenser unit (model year 2016). Performed comprehensive AC tune-up including system inspection, cleaning, and performance verification. Confirmed best contact number for future service needs. Unit operational and ready for cooling season.

Responded to service call for Generac generator displaying yellow indicator light that had previously shown red. Performed diagnostic inspection of generator system including visual examination of all accessible components, electrical connections, and control panel status indicators. Verified unit operation and monitored system performance to identify potential fault conditions. Documented equipment condition through photographic records showing internal components, gas valve assembly, blower motor, and control box within the unit enclosure. System evaluated for proper function and safety compliance.

Completed full humidifier replacement with installation of a new 600 series manual humidifier unit. Installed new ball valve on the cold water supply line to provide proper water control and shutoff capability. System tested and verified operational with all connections secure and leak-free.

Responded to customer complaint of insufficient hot water supply from 15-year-old water heater. Performed visual inspection and diagnostic assessment of unit in basement utility area. Documented existing conditions of water heater, surrounding plumbing connections, and mechanical systems. Based on age of unit and reported symptoms of reduced hot water capacity, likely issues include sediment buildup in tank reducing effective water volume, deteriorating heating elements, or failing dip tube causing hot and cold water mixing. Photographed installation for service records.

Completed annual cooling maintenance on 2019 EnergiAir system under 2-year tune-up agreement. Performed standard inspection procedures, checked refrigerant levels, cleaned condensate drain pan and replaced air filters in mechanical room. System operating within normal parameters with no issues identified.

Completed full water heater installation in residential basement mechanical room. Installed new water heater unit with proper venting, connected all copper supply and distribution piping, integrated expansion tanks and pressure relief systems, and ensured all connections meet code requirements. System tested and operational with all plumbing connections secure and no leaks detected.

Responded to water leak call and performed thorough inspection of residential water heater and associated plumbing system. Documented Bradford White automatic storage water heater installation, including all manufacturer labels, safety warnings, and operating instructions for service records. Examined copper supply lines, brass fittings, pressure relief valve connections, and expansion tank to identify source of reported leak. Inspected all visible pipe joints, threaded connections, and soldered copper joints in the immediate vicinity of the water heater. Verified proper installation of temperature and pressure relief valve and discharge piping. Assessed condition of water heater cabinet, insulation, and surrounding mechanical room environment. Photographed equipment specifications, model information, and BTU ratings for documentation purposes. Checked integration with HVAC system and nearby furnace unit to ensure no cross-contamination or moisture issues affecting adjacent equipment.

Completed annual cooling maintenance on a 2023 Carrier 59RTPA030N171116 furnace system. Performed comprehensive tune-up including condensate pump inspection and drainage system evaluation, verified all components operating within manufacturer specifications, and documented equipment condition with photographic records for service history.

Completed installation of new 62-gallon well pressure tank in basement utility area, including all necessary plumbing connections and fittings. Installed new pressure relief valve as part of the system upgrade to ensure proper safety operation. Removed and properly disposed of old tank, tested system for proper pressure levels and verified all connections were secure and leak-free upon completion.

Rerouted kitchen water line through attic crawl space to resolve plumbing configuration issue. Accessed work area through ceiling opening, ran new copper supply line through joists, and secured routing to avoid interference with existing HVAC ductwork and structural members.

Completed annual cooling maintenance on 2011 EnergiAir heat pump unit under 3-year warranty coverage. Performed comprehensive system inspection including refrigerant level check, electrical connection testing, condensate drain verification, and airflow assessment. Unit operating within manufacturer specifications with no deficiencies noted at time of service.

Responded to service call for two-toilet issue in 22-year-old residence. Upstairs toilet diagnosed with chronic overrunning condition causing water waste for 3-6 months. Removed tank lid and performed diagnostic inspection of flush valve assembly, fill valve, and float mechanism. Identified internal component failure causing continuous water flow and improper shut-off. Utilized blue dye test to confirm leak pathway and water flow issues within tank. Discussed repair options and recommended component replacement to restore proper function and eliminate water waste. Basement toilet assessed and determined to require full replacement. Provided consultation on available toilet models and installation options. Documented both fixtures with photographic evidence for service records.

Responded to service call for Bradford White water heater that was flooded following bathroom tub replacement. Performed thorough inspection of unit and all plumbing connections after homeowner had removed standing water from area. Upon examination, verified water heater operation, checked for internal damage, inspected venting system, and tested all safety controls to ensure unit was functioning properly and safe for continued use.

Conducted site assessment of existing plumbing installation to prepare for follow-up work. Documented current configuration of gas line assembly and water treatment system connections, including PVC and copper piping arrangement mounted to wooden backing board. Identified location where check valve installation will be required on inlet side of iron curtain water treatment unit during return visit. Photographed existing setup showing brass valve connectors, flexible gas lines, and junction points to ensure proper planning for upcoming check valve installation work.

Completed annual cooling maintenance on 20-year-old Goodman AC system. Performed comprehensive tune-up including inspection of outdoor unit, refrigerant levels, electrical connections, and condensate drainage system. Unit operational and ready for cooling season.

Successfully completed installation of new furnace and tankless water heater system in residential mechanical space. Mounted Energy Star certified tankless water heater unit to wall framing with complete copper piping connections including multiple supply and return lines with appropriate shut-off valves. Installed furnace system with vertical air handler assembly and connected metallic ductwork for proper air distribution throughout the home. Integrated existing water treatment equipment including pressure expansion tank and water softener system into new plumbing configuration. All copper piping routed systematically with proper spacing for maintenance access. Electrical connections completed with appropriate panel integration. System installed on proper base platform with all components positioned for optimal performance and serviceability. Installation verified operational and ready for use.

Completed kitchen remodel installation including undermount sink and pull-down faucet with brushed stainless finish in granite countertop. Verified all plumbing connections, drain assembly, and under-cabinet mechanical components are properly secured and functioning. Kitchen installation finalized and ready for use.