HVAC & Plumbing Services in Grand Rapids, MI

Performed annual tune-up on EnergiAir furnace (model WT 03-2035, manufactured 2023). Inspected and documented system components, including electrical connections and PVC vent piping. No humidifier present in system. Equipment functioning within normal parameters; no issues requiring immediate attention identified.

Responded to service call for 16-year-old Aprilaire humidifier that was not functioning. Inspection revealed significant mineral buildup on internal components and deteriorated wiring connections. Performed thorough cleaning of feed tube and water panel, replaced damaged wire connections with proper wire nuts, and restored system to normal operation.

Responded to no hot water complaint for 11-year-old Richmond water heater. Inspected ventilation system and found improper flue pipe installation causing draft issues. Repaired and realigned flue connection, restored proper venting, and confirmed water heater returned to normal operation with adequate hot water production.

Responded to no heat call and discovered faulty pressure switch/control module in HVAC system. Inspected internal components including copper coil, terminal connections, and electrical wiring. Replaced defective component to restore proper heating function.

Replaced failed temperature sensor on 10-year-old Whirlpool water heater that was preventing hot water production. System now functioning properly with restored hot water supply.

Successfully replaced dishwasher as per quoted repair. Installation completed within scheduled 2-hour timeframe. All connections were properly secured and unit was tested for proper operation before completion.

Completed annual heating tune-up on 8-year-old furnace with humidifier. Noted water heater with galvanized vent pipe and provided customer with estimate for replacement as requested. All systems functioning properly with no issues identified.

Responded to water leak issue on 17-year-old CAR furnace. Discovered condensate drain tube misalignment with collection pan, causing water to leak underneath unit. Repositioned drain tube according to "THIS END UP" directional indicators and verified proper drainage path through the black corrugated discharge hose with green connector ring. System now operating correctly with no further leakage.

Responded to service call for water leakage from humidifier. Inspection revealed severely clogged air filter restricting proper airflow and water drainage issues at the humidifier drain port with visible staining indicating ongoing leakage. Replaced filter, cleaned drainage components, and verified proper system operation before completing service.

Successfully replaced defective gas valve on heating system as quoted. Verified proper flame pattern and burner operation after installation, with all connections properly secured and system functioning correctly.

Conducted site visit to assess electrical service installation. Inspected exterior electrical meter (reading 03732) mounted on vinyl siding with proper conduit connections. Documented current meter configuration and surrounding area conditions for quote preparation.

Picked up necessary parts for the quoted repair job involving a furnace inducer motor replacement. Identified significant corrosion on the existing inducer motor assembly with visible oxidation on copper components and rust streaks indicating moisture exposure. Work will continue when technician returns to complete the inducer motor installation as scheduled.

Completed full system replacement including installation of a new high-efficiency furnace, air conditioning unit, and water heater as part of a comprehensive HVAC upgrade. All components were properly connected with appropriate ductwork, PVC venting, and copper plumbing lines. System was fully tested and verified operational with all safety features functioning correctly.

Performed annual maintenance on 18-year-old Payne furnace. Completed comprehensive tune-up including inspection of internal components, connections, and control module. No issues identified with heating system; all components appear properly installed and functioning correctly.

Performed complimentary annual furnace tune-up on 15-year-old Carrier system with humidifier. Inspected control box, wiring connections, and ductwork integrity. System is functioning properly with all components in working order. Recommended continued maintenance to extend equipment lifespan.

Responded to service call for bathroom faucet leak. Inspected three-handle chrome bathroom fixture on beige porcelain sink. Identified worn valve seals causing seepage, replaced worn components and tested system for proper function and leak-free operation.

Successfully completed quoted repair involving disconnection of hot side handle assembly and installation of new hot end valve assembly while preserving the existing chrome faucet trim. Verified proper functionality of the newly installed components and confirmed no leaks in the plumbing system beneath the undermount sink.

Completed annual furnace tune-up on 3-year-old Carrier system as part of comfort club membership. Inspected condensate collection tray, which showed normal water accumulation, and examined control components. All systems functioning properly with no issues identified in heating operation.

Performed annual heating maintenance on 13-year-old Goodman furnace and humidifier. Inspected water heater as requested by customer, noting significant deterioration and recommending replacement. Examined ductwork connections and venting system, confirming proper installation despite minor wall discoloration around vent penetrations.

Responded to water leak service call for 1-year-old Carrier furnace. Discovered condensate drain line was clogged, causing water to pool on concrete floor beneath unit. Cleared blockage, cleaned drain assembly, and verified proper drainage function. System is now operating correctly with no signs of leakage.