Expert HVAC, Plumbing & Generator Services in Mason

Completed comprehensive annual cooling system maintenance and inspection under 3-year ENERGIAIR warranty agreement. Performed standard AC tune-up procedures including system diagnostics, refrigerant level verification, electrical component testing, and condensate drainage system inspection. Documented mechanical room equipment configuration including condensate pump assembly with PVC discharge piping and drainage pan installation. Inspected return air ventilation grille showing moderate dust and debris accumulation in louvered sections; noted standard maintenance cleaning recommended to maintain optimal airflow efficiency. All HVAC components operating within manufacturer specifications at time of service completion.

Completed quoted electrical panel inspection and documentation in utility room. Photographed main electrical panel showing dual columns of circuit breakers in serviceable condition with proper labeling on interior door. Documented existing wall penetration where copper piping passes through drywall near HVAC equipment, noting opening requires future repair to maintain building envelope integrity. All electrical components verified accessible and panel maintained in clean, operational condition.

Responded to service call for washing machine water supply lines installed in reverse configuration. Upon arrival, identified that hot and cold water shut-off valves were connected opposite to standard plumbing convention, with hot water line on right side instead of left. Verified issue by inspecting wall-mounted valves with turquoise and red wheel handles and tracing supply connections. Corrected the cross-connection by properly reconnecting the flexible stainless steel braided supply hoses to appropriate hot and cold water sources, ensuring hot water feeds to left connection and cold water to right connection per industry standard. Secured all connections and verified proper water flow to washing machine. System tested and operating correctly with water lines now properly configured.

Completed annual cooling maintenance on a 9-year-old residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, including visual assessment of cabinet condition, fan assembly, and refrigerant line connections. Accessed electrical compartment and inspected contactor, capacitor, and all electrical connections for proper operation and signs of wear. Noted normal weathering and dirt accumulation consistent with outdoor equipment age. Documented unit condition with photographs showing external components, electrical panel, and mechanical connections. System operational and ready for cooling season.

Completed air pressure test on newly installed drain lines at 5 PSI in accordance with state plumbing code requirements. Coordinated with state inspector for on-site verification of drainage system integrity, ensuring all PVC waste and vent assemblies maintained proper pressure throughout the testing period for code compliance and final approval.

Completed installation of battery backup sump pump system in basement location. Installed primary sump pump in concrete pit with PVC discharge piping running vertically to overhead connection point. Mounted wall-mounted control panel with indicator lights and installed floor-level battery backup unit with all necessary electrical connections and cabling between components. System tested and operational, providing automatic backup protection during power outages.

Completed 200-amp electrical service upgrade at residential property. Coordinated utility company power disconnect and reconnect to facilitate safe installation of new service panel. Obtained electrical permit and scheduled required inspections, which were completed and approved. Installed new gray circuit breaker panel with main breaker and dual columns of individual circuit breakers, mounted securely to interior wall. All work performed to current electrical code standards with proper labeling and documentation affixed to panel interior. Power restoration confirmed following successful inspection approval.

Installed dedicated electrical circuit and exterior conduit system for new mini-split HVAC unit, including junction box and proper weatherhead termination at roofline. Added GFCI-protected outlet and separate outlet for water heater, ensuring all installations meet current NEC code requirements with appropriate wire sizing and overcurrent protection.

Responded to water leak discovered by electricians during their work. Created ceiling access opening to expose and assess copper plumbing lines showing age-related corrosion and patina buildup. Documented existing conditions with photos showing compromised piping in ceiling cavity above window area.

Completed annual cooling system maintenance and inspection under active maintenance agreement. Performed comprehensive tune-up including filter check, electrical connections verification, refrigerant level assessment, and operational testing of all system components. Documented physical damage to exterior condenser unit grille where center section has been crushed inward, exposing internal mesh filter material. Unit operating within normal parameters despite cosmetic damage to protective housing. Captured photographic documentation of damaged grille for customer records and potential future repair consideration.

Completed installation of Energy Star certified tankless water heater unit with proper venting system utilizing dual PVC exhaust pipes. Installed comprehensive copper piping manifold with hot and cold water valve assemblies, shutoff controls, and safety drip pan beneath unit. Mounted water heater securely to wooden backing panel with all plumbing connections properly fitted and tested for leaks. Electrical work completed to power unit, with all components installed to code specifications.

Responded to service call for sump pump running continuously. Upon arrival, performed comprehensive inspection of sump pump system and surrounding drainage components. Examined pump operation, float switch mechanism, and discharge piping. Inspected floor drain and surrounding plumbing infrastructure in basement utility area. Verified proper drainage flow and checked for obstructions or mechanical failures that could cause constant pump cycling. Documented existing conditions with photos showing exposed plumbing, copper supply lines with insulation, HVAC ductwork, floor drain opening with visible sediment accumulation, and PVC drainage components. Assessed overall system functionality to determine cause of continuous operation concern.

Responded to service call for water heater with water accumulation in drain pan and unit not operational. Upon inspection, discovered significant rust and corrosion on internal components including heat exchanger fins and metal housing panels, indicating prolonged moisture exposure and deterioration of critical components. Documented extensive rust damage with photographic evidence showing advanced corrosion on upper housing sections and rust streaking on ventilation panels. Due to severity of corrosion damage compromising unit integrity and safety, recommended immediate water heater replacement. Unit age and condition of deteriorated components determined repair to be unfeasible.

Responded to water softener leak call and performed on-site inspection of plumbing system in basement utility area. Upon examination of the water softener installation, identified multiple plumbing connections including PEX, PVC, copper, and threaded pipe assemblies converging in the service area. Documented existing plumbing configuration showing various pipe materials and junction points to assess leak source and recommend appropriate repairs.

Completed annual cooling maintenance and tune-up on residential air conditioning system as part of recurring service agreement. Performed comprehensive system inspection, verified proper operation of all components including control module and electrical connections, checked refrigerant levels, and documented equipment condition with photos. All systems tested and found operating within normal parameters.

Responded to water heater leak call and conducted thorough inspection of the unit and surrounding plumbing infrastructure. Upon examination of the basement mechanical area, documented the HVAC system, water heater installation, and associated PVC drainage piping network. Photographed the condensate drainage system, including multiple PVC pipes with proper fittings and connections running to the main drain line. Inspected all visible plumbing components, pipe connections, and mechanical equipment for signs of active leakage or moisture damage. System evaluation completed with photographic documentation of current installation conditions for service records.

Responded to gas leak call at detached garage housing a 12-year-old Goodman furnace and 1-year-old Rinnai boiler. Upon inspection, identified leak originating from gas pipe union connection at appliance. Tightened hexagonal union fitting and verified secure seal at threaded connections. Performed leak detection test to confirm repair, ensuring safe operation of gas supply lines to both heating units.

Conducted comprehensive site assessment for whole home electrical upgrade estimate. Documented existing electrical infrastructure including main service panel with exposed circuit breakers, multiple branch circuit wiring, and current electrical distribution system installed within unfinished areas. Photographed electrical panel configuration showing existing breaker arrangement, wire routing, and panel condition to evaluate capacity and compliance requirements. Assessed installation environment including proximity to plumbing lines, HVAC ductwork, and structural framing to determine scope of work needed for complete electrical system modernization and code compliance upgrades.

Completed full furnace replacement in basement utility area. Installed new gray metal furnace unit on rubber mat with proper clearances, connected PVC venting system to exhaust/intake pipes routed through ceiling joists, and established all necessary ductwork connections including metallic supply plenum. Verified proper operation of all safety controls, tested ignition sequence, and confirmed adequate airflow throughout system.

Completed full furnace installation in mechanical room, including mounting of new gray metal air handler unit on base platform. Installed and routed white PVC condensate drain lines from unit with proper pitch and connections. Connected supply and return ductwork to unit, verified all mechanical connections, and tested system operation to ensure proper functionality.