Top-Notch HVAC, Plumbing & Generator Services in Rockford, MI

Completed water softener replacement in basement utility area. Removed existing water softening system and installed new unit consisting of tall white cylindrical resin tank with digital control head and separate black brine tank. Connected control valves, PEX supply lines, drain lines, and electrical power to new system. Tested operation and verified proper function of regeneration cycle and water flow.

Completed annual heating maintenance on 11-year-old Payne furnace system. Performed comprehensive tune-up including inspection of heat exchanger, burner assembly, and ignition components. Verified proper operation of blower motor, checked electrical connections, and tested safety controls. Cleaned burners, inspected flue venting system with white PVC exhaust pipes, and confirmed adequate combustion air supply. System operating within manufacturer specifications with no deficiencies noted at time of service.

Conducted on-site evaluation for cooling solution in home theater space experiencing excessive heat buildup from projector operation. Assessed existing HVAC infrastructure including exposed ductwork in unfinished basement ceiling area and plenum space above drop ceiling, photographed current system configuration, and provided estimate for mini-split installation or alternative cooling options to address inadequate temperature control in the dedicated theater room.

Responded to inspector correction for water heater installation. Addressed leaking 1/2" copper hot water line located near the 3/4" press-fit fitting connection point for the new water heater. Secured and properly glued the exterior 2" PVC intake and exhaust piping to ensure proper ventilation system integrity and code compliance.

# Water Softener System Inspection and Diagnosis Responded to service call for water softener experiencing abnormal water level condition. Upon arrival, found older Kenmore water softener unit (estimated 20+ years old) with brine tank filled with water approximately 6-7 inches from top rim, indicating malfunction in regeneration cycle or brine draw system. Conducted thorough inspection of complete water treatment installation in basement utility area. Examined water softener control head, brine valve assembly, and associated plumbing connections. Inspected copper supply lines, PVC drain lines, and bypass valve configuration. Verified proper operation of shut-off valves and checked for any visible leaks or deterioration in piping system. Assessed overall condition of aging water softener equipment and related components including pressure tanks and water heater integration. Documented excessive water accumulation in brine tank through photographic evidence. Identified potential cause

Successfully installed new Amana furnace unit in residential mechanical room with proper venting using white PVC piping. Completed all electrical and gas connections, integrated ductwork with existing air handler system, and installed condensate drainage lines. All equipment was mounted securely, labeled appropriately with manufacturer specifications and safety documentation, and tested for proper operation to ensure system functionality.

Completed full residential HVAC system installation including new furnace and air conditioning unit in utility closet. Installed all associated ductwork with galvanized steel exhaust piping, routed white PVC condensate drainage lines with proper pitch and support, and made all necessary electrical connections. System tested and verified operational with all safety labels and manufacturer specifications confirmed in place.

Completed full residential water heater installation in basement utility room. Removed existing unit and installed new white cylindrical water heater with proper copper piping connections and electrical wiring. Ensured all plumbing connections were secure, verified proper venting, and tested unit operation to confirm hot water delivery throughout the residence.

Completed furnace super tune-up and inspected 25-year-old water heater showing rust deterioration on bottom of tank. All furnace components tested and serviced per maintenance protocol, ductwork and connections verified secure. Water heater shut-off valves tagged and confirmed operational, though unit is approaching end of service life due to age and visible corrosion.

Completed annual heating maintenance on 2019 Lennox furnace and humidifier system. Performed comprehensive tune-up including filter inspection, burner assembly cleaning, heat exchanger examination, blower motor lubrication, and thermostat calibration. Verified proper operation of all safety controls, tested ignition sequence, and confirmed adequate airflow through ductwork system. All components found operating within manufacturer specifications with no immediate repairs required.

Completed annual heating maintenance on furnace system. Performed comprehensive tune-up including inspection of all major components, burner assembly cleaning, and system operation verification. Inspected condensate drain pan located in crawl space, noting discoloration and debris accumulation. Pan shows signs of normal wear with mineral deposits and staining but remains functional. Verified proper drainage and confirmed no active leaks present. All heating system components operating within manufacturer specifications.

Completed full air conditioning system replacement including outdoor condenser unit and indoor air handler. Installed new condenser on exterior concrete pad with proper electrical disconnect box and refrigerant line connections. Mounted new air handler in basement mechanical room alongside existing furnace, with all necessary condensate drainage piping and electrical connections properly configured per manufacturer specifications. System tested and verified operational.

Completed annual heating and cooling maintenance on 12-year-old Carrier furnace and air conditioning system. Performed comprehensive tune-up including inspection of all major components, electrical connections, and mechanical assemblies. Verified proper operation of blower motor, heat exchanger, capacitor, and control systems. Checked refrigerant levels, cleaned condensate drain lines, and inspected ductwork connections for proper sealing. All systems tested and found operating within manufacturer specifications.

Completed annual heating maintenance on a 9-year-old Goodman furnace system. Performed comprehensive tune-up including inspection of all mechanical components, burner assembly cleaning, and system operational testing. Removed and cleaned four burners, which showed normal oxidation consistent with age. Verified proper ignition sequence, heat exchanger integrity, and airflow throughout the system. Confirmed all safety controls functioning correctly. No humidifier present on this system per membership agreement. Unit operating within manufacturer specifications at completion of service.

Completed annual cooling maintenance on 12-year-old EnergiAir system. Inspected and serviced all major components including refrigerant lines with service valves, verified proper system operation, and documented equipment condition with photos. Unit operating within normal parameters with no immediate repairs required.

Conducted free estimate for proactive replacement of 18-year-old standard tank water heater located in basement. Unit currently functioning without leaks, malfunctions, or performance issues. Inspected existing installation including copper supply lines, brass fittings, gate valves, and venting system; documented tank condition showing age-related surface discoloration and water staining on galvanized exterior. Assessed installation area accessibility, clearances, and existing plumbing connections to provide accurate replacement specifications and pricing options for future planned upgrade.

Completed annual cooling maintenance on 11-year-old Trane system. Performed comprehensive AC tune-up including inspection of outdoor condensing unit, refrigerant charge verification, electrical connection testing, and airflow assessment. Verified system operation and confirmed proper functioning of all components. Documentation photos captured for service records showing basement furnace installation with connected ductwork and plenum assembly.

Completed annual cooling system maintenance including full inspection of air conditioning equipment, refrigerant levels, and electrical connections. Addressed customer concern regarding elevated indoor humidity levels exceeding 50% by inspecting and servicing the HVAC humidifier unit and evaluating thermostat operation for proper humidity control settings. All system components tested and operating within manufacturer specifications upon completion.

Completed annual heating maintenance on EnergiAir furnace installed in 2022 with warranty extending to August 2033. Performed comprehensive tune-up including filter inspection, burner assembly cleaning, heat exchanger examination, and system operational testing. Verified proper ignition sequence, flame sensor operation, and blower motor function. Documented existing water filtration system and water heater during routine inspection with photographic records for service history.

Responded to emergency call for sewer backup into shower. Inspected plumbing system in crawl space and identified drainage obstruction in main sewer line. Cleared blockage using professional drain cleaning equipment, restoring proper flow and eliminating backup issue. Verified all fixtures draining correctly upon completion.