Reputable HVAC, Plumbing & Generator Services in Zeeland, MI

Completed annual cooling maintenance on 9-year-old EnergiAir condensing unit manufactured in 2019. Performed standard tune-up procedures including inspection of drain pan assembly, which showed discoloration and staining indicating previous moisture accumulation; verified drain system functionality and cleaned components as needed. All rubber grommets and mounting hardware inspected and confirmed secure.

Completed comprehensive electrical estimate for residential property requiring EV charger installation, new lighting fixtures with switch and electrical run, and main service panel upgrade to accommodate increased amperage demand. Site assessment documented existing Generac PWRcell energy storage system, current electrical service panels, meter configuration, and exterior conduit routing to determine optimal integration points for proposed upgrades and ensure compatibility with existing power management infrastructure.

Provided estimate for replacement of existing 20-25 year old Bradford White natural gas tank water heater with new tankless system. Assessed current installation including copper supply lines, blue-handled shutoff valve, and venting configuration in basement utility area. Evaluated electrical requirements for tankless conversion, noting absence of existing electrical infrastructure at installation location and current breaker panel capacity limitations. Documented existing panel with multiple circuits serving furnace, microwave, and lighting loads in unfinished utility space with exposed stud framing. Discussed future electrical upgrade needs including panel amperage increase to accommodate tankless water heater demand, potential EV charger installation, and additional lighting projects. Scheduled follow-up appointment to address electrical scope assessment and provide comprehensive estimate for complete system conversion and electrical infrastructure improvements.

Responded to emergency plumbing leak caused by burst pipe in residential basement. Upon arrival, assessed damage to exposed plumbing lines running along ceiling joists in utility area. Repaired compromised section of water supply line, secured all piping with proper mounting brackets, and verified system integrity through pressure testing. Documented existing conditions including OSB ceiling sheathing, exposed floor joists, and concrete foundation walls showing minor water staining from the incident.

# Job Description Responded to a sump pump and water backup emergency under a QUOTR-quoted repair authorization. Upon arrival, assessed the existing plumbing system and identified failures in the backup prevention infrastructure that were allowing water intrusion during heavy flow conditions. Installed a comprehensive water backup prevention system consisting of dual check valve assemblies with brass fittings and shut-off valves on the main water supply line. Mounted a white filtration housing unit to the concrete wall using secure black brackets, integrating it with the existing copper supply piping. Connected all components using appropriate brass compression fittings and copper pipe extensions to ensure proper water flow and system isolation capability. On the drainage side, configured a white PVC pipe assembly in a vertical loop configuration to manage sump discharge and prevent backflow. Integrated two electronic water backup prevention devices with American-flag-branded housin

Conducted an assessment of an aging water heater system scheduled for replacement by 2026. Inspection revealed a professionally installed unit with proper copper supply line connections and appropriate metal ductwork ventilation system mounted against a brick wall in a utility area. Documented the existing installation with detailed photos to support future replacement planning.

Diagnosed water heater failure and determined pressure relief valve was leaking and ignition system was non-functional. Inspected 9-year-old Goodman unit and surrounding plumbing components including the expansion tank. Documented condition of system with photos showing complete installation configuration for assessment of repair versus replacement options.

Successfully completed installation of new residential HVAC system in basement utility room, including furnace unit with metallic housing and air handler. System was properly connected to existing ductwork with all manufacturer specifications verified for optimal performance.

Completed annual heating maintenance on a 14-year-old Energi furnace. Inspected and cleaned the blower wheel assembly which showed minor dust accumulation. Examined heat exchanger port for proper operation with no signs of cracks or significant corrosion detected.

Completed annual heating maintenance on furnace per service agreement. Inspected vertical PVC flue pipe connection in utility area and confirmed proper installation with no visible issues. System is functioning normally with no humidifier currently installed on this 4-year-old unit.

Responded to call for inoperative water heater (Schinar brand, approx. 10 years old). Diagnosed and repaired issue with heating element, restoring full functionality to the unit. Confirmed proper operation before completing service.

Arrived to find furnace not operating during power outage. Customer was using portable Generac generator for temporary power. Connected furnace to generator, verified operation, and instructed customer on proper generator connection procedures for heating system during outages.

Successfully installed new residential water heater in mechanical room, including proper connection of copper supply lines and completion of all required plumbing work. System was tested for proper operation and safety features were verified before finalizing installation.

Responded to service call for CWOW. Secured loose PVC vent line in attic area by properly fastening it to structural framing. Verified proper installation and functionality of the vent system after repair.

Diagnosed sump pump that was continuously running but not evacuating water properly. Inspected PVC discharge piping system and pump mechanism, determining the pump had failed. Replaced defective sump pump unit, tested new installation, and verified proper water evacuation and cycling.

Completed sump pump replacement in basement drainage system. Existing unit was approximately 20 years old with significant sediment buildup in basin. Installed new sump pump with proper PVC discharge piping and verified proper operation of the system to ensure effective water management.

Conducted estimate for leaking water heater that is not producing hot water. Existing unit is a cylindrical metallic water heater with copper pipes connected to top section, installed in basement utility area. Inspected associated plumbing infrastructure including PVC piping, brass valves, and connections to determine replacement requirements.

Repaired leaking shower faucet in primary bathroom by replacing worn cartridge assembly and adjusting pressure regulator. Additionally, installed new pop-up drain assemblies in both bathtubs, ensuring proper water retention and drainage functionality.

Conducted on-site water heater estimate for replacement of existing JetGlas unit. Inspected current installation, which includes copper supply/return lines and appears to be positioned in utility room on concrete slab. Documented condition of unit and surrounding plumbing components to provide accurate replacement options.

Completed installation of new furnace, air conditioning system, and two unit heaters as scheduled. System was properly mounted on concrete pad with all connections secured according to manufacturer specifications. Customer financing was processed and documentation completed with proper identification verified.