Reputable HVAC, Plumbing & Generator Services in Zeeland, MI

Completed annual cooling system maintenance on a 15-year-old AC unit, including full system inspection, electrical component testing, and verification of capacitor and Comfort Alert monitoring device connections. All wiring connections were inspected and found secure, system operational parameters were within manufacturer specifications, and photographic documentation was captured for service records.

Conducted sales estimate for replacement of 30-year-old residential forced air furnace system currently operational in utility closet. Documented existing beige furnace unit with galvanized metal ductwork, adjacent water heater, and overall mechanical room configuration through photographic assessment to provide comprehensive replacement proposal for aging HVAC equipment.

Conducted on-site assessment for whole home re-pipe project. Documented existing plumbing infrastructure including corroded water heater connections with visible mineral deposits on metal fittings, braided stainless steel supply lines, and PVC drainage system running through exposed ceiling joists in basement/crawl space area. Photographed current conditions to support comprehensive estimate for complete residential plumbing system replacement.

Responded to service call for home experiencing inconsistent heating and cooling performance requiring frequent thermostat adjustments. Upon inspection, found improperly configured thermostat wiring at the wall unit with multiple wire connections requiring verification at the terminal block. Removed thermostat cover to access RC, RH, Y, G, and C terminal connections and traced wiring back to the air handler control board. Inspected the main control board PCB with LED indicators and verified proper voltage at all connection terminals. Examined wire bundle routing between thermostat and HVAC system components, including connections to capacitors and refrigerant line assembly. Corrected thermostat wiring configuration to ensure proper communication between control systems. Verified all terminal connections were secure at both the wall unit and control board. Cycled system through heating and cooling modes to confirm proper operation and stable temperature control without requiring manual

Conducted site assessment and provided project estimate for potential sump pump replacement in eleven-year-old residential property. Inspected existing submersible sump pump system with PVC discharge piping in basement area, noting water staining on concrete floor and functional pump assembly within basin. Documented current system condition and exterior discharge configuration for quote preparation, with no immediate operational issues identified at time of inspection.

Completed comprehensive AC Super Tune-up on 6-year-old system, including full inspection of refrigerant lines, electrical connections, and condensate drainage components. All mechanical and plumbing connections verified to be secure and functioning properly, with system operating within manufacturer specifications. Customer renewed annual maintenance club membership at time of service.

Completed toilet installation in residential bathroom with teal walls and beige vinyl flooring. White toilet successfully installed beneath window, with all connections secured and tested for proper operation and leak-free performance.

Serviced existing sump pump system in basement utility area. Inspected vertical PVC discharge pipe assembly secured to concrete block wall with proper mounting straps, verified electrical connection at wall-mounted outlet box, and confirmed operational status of pump within concrete pit. System found functioning properly with discharge piping, check valve, and drainage components in good working condition.

Responded to service call for 13-year-old water heater that would not maintain heating operation. Upon inspection, diagnosed failed thermocouple or gas control valve preventing pilot from staying lit. Performed necessary repairs to restore proper heating function and verified unit operation before completing service.

Responded to service call for 9-year-old tankless water heater experiencing intermittent beeping during high-demand usage (laundry, bathtub filling). Performed diagnostic evaluation and descaling flush service to address mineral buildup affecting flow sensor operation. Unit restored to normal operation across all fixtures.

Completed annual cooling maintenance on Carrier system per club membership agreement. Performed comprehensive tune-up including inspection of air handler compartment, verified filter condition, and documented equipment status with photos. All components operating within normal parameters at time of service.

Responded to service call for toilet that would not flush. Upon inspection, found the flush lever chain had become disconnected from the flapper valve inside the tank. Reconnected the chain to the flush lever arm and flapper mechanism, adjusted chain length for proper operation, and tested flush function multiple times to ensure reliable performance. Toilet now operates normally with full flush capability restored.

Responded to no heat call and performed diagnostic inspection of HVAC system. Upon examination of the unit interior, identified and addressed electrical component concerns. Verified proper wire connections across multiple circuits including control wiring and power supply lines, inspected heating elements and associated mechanical components for proper operation, and confirmed system functionality before completing service.

Completed installation of Energy Star certified tankless water heater in basement utility area, mounted on plywood backing board secured to wall studs. Established all necessary plumbing connections including copper supply lines, installed expansion tank, drain pan with condensate pump, and verified proper venting through existing infrastructure. System tested and operational with digital controls functioning correctly.

Completed full HVAC system installation including new furnace unit and outdoor air conditioning condenser. Installed Aprilaire whole-house humidifier with digital control panel, connected all ductwork and PVC condensate piping, and mounted exterior condenser unit on concrete pad with proper electrical connections. System tested and verified operational with all components functioning per manufacturer specifications.

Completed annual cooling maintenance on 2014 EnergiAir system with 10-year service history. Performed comprehensive tune-up including inspection of condensate pump assembly, drainage lines, and electrical connections; documented equipment condition with photos showing proper installation of safety flooring and condensate management components. All systems operational and functioning within manufacturer specifications.

Responded to service call for reported boiler leak on 1-year-old Utica WT 2-2030 unit. Upon inspection, located leak source at corroded pipe connection in crawl space area adjacent to boiler installation. Identified moisture damage and discoloration on surrounding wooden framing members and compromised fiberglass insulation from water exposure. Assessed threaded pipe connections and galvanized steel piping showing surface corrosion and deterioration. Documented conditions with photographs showing affected plumbing infrastructure, spray foam insulation areas, and copper piping with visible oxidation. Addressed leak at connection point and verified system integrity upon completion.

Completed annual cooling system tune-up and preventative maintenance inspection. System evaluated and found to be operating within normal parameters with no immediate service needs identified at this time.

Responded to no heat call for 2008 Goodman furnace. Upon inspection, found condensate drain system experiencing drainage issues as evidenced by exterior wall staining below exhaust vent termination. Documented PVC vent pipe configuration and condensate discharge points. System evaluated for proper venting and drainage functionality to restore heating operation.

Completed annual cooling maintenance on 7-year-old EnergiAir unit with warranty coverage through October 2028. Verified thermostat operation and documented system settings showing unit in heating mode with room temperature at 62°F and setpoint at 73°F, confirming proper display and control functionality for seasonal transition.