Top-Notch HVAC, Plumbing & Generator Services in Battle Creek, MI

Completed annual cooling system maintenance and inspection on 4-6 year old air conditioning unit. System found in good operating condition. Discovered significant debris accumulation including leaves and organic material in blower compartment through circular access opening, which was documented photographically. Inspected electrical connections and wiring harnesses, all properly secured with zip ties and showing appropriate color coding. Evaluated HVAC equipment located in unfinished basement utility area with exposed ductwork and standard concrete flooring. All mechanical components, ductwork, and furnace/air handler unit inspected and functioning within normal parameters.

Installed outdoor electrical outlets at two locations: one on the exterior of the residential home and one on the pole barn structure. Mounted and properly wired a GPS antenna system for automated lawn mower equipment, ensuring correct positioning and secure installation with appropriate weatherproof connections.

# Annual Cooling Maintenance - Dual Armstrong System Completed comprehensive annual cooling maintenance on two 24-year-old Armstrong air conditioning units. Upon inspection, discovered significant leaf debris accumulation in the middle compartment of the primary unit, which had entered from the exterior and created a substantial blockage affecting airflow and system efficiency. Removed all organic debris from the interior compartments and cleaned affected areas to restore proper ventilation pathways. Inspected all electrical connections, including circuit breakers and wiring harnesses, ensuring secure connections throughout both systems. Verified integrity of refrigerant lines and copper tubing. Examined compressor units and associated mechanical components for proper operation. Secondary system inspection revealed rust-colored corrosion and staining on condensate drain components, indicating previous water exposure and potential drainage issues. Assessed condition of drain assembly

Completed annual cooling maintenance on 20-year-old Goodman HVAC system. Performed comprehensive inspection of air handler, furnace unit, condensate pump, and associated ductwork in mechanical room. Verified proper operation of drainage system with condensate pump and discharge lines, checked electrical connections, and confirmed all safety labels and warning indicators were intact and visible on equipment.

Completed annual cooling maintenance on Alumacoil heat pump system model CAPTA3022B3AA with A2L refrigerant. Performed comprehensive inspection of basement-installed unit including furnace and air handler components, verified all electrical connections, checked refrigerant levels, inspected PVC intake/exhaust venting, and documented system specifications and equipment condition with photos.

Completed annual cooling maintenance on 16-year-old York air conditioning system. Performed comprehensive system inspection, cleaned condensate drain pan and applied algae treatment tablets to prevent biological growth and maintain proper drainage. All components operating within normal parameters upon completion of tune-up service.

Completed scheduled three-year tune-up maintenance on Generac generator unit. Performed comprehensive inspection of all major components including cooling system hoses, heat exchanger, battery terminals, and electrical connections. Observed corrosion buildup on battery terminals requiring attention during routine maintenance cycle. All hoses, clamps, and mechanical connections verified secure and functioning properly.

Completed full air conditioning system installation including indoor air handler unit and outdoor condenser unit. Installed new gray furnace/air handler in interior utility room with proper refrigerant line connections, electrical conduit, and flexible ductwork routing. Mounted outdoor condenser unit on pad adjacent to building exterior with electrical whip connection secured to siding. Verified all refrigerant lines, electrical connections, and condensate drainage properly installed and operational. System tested and confirmed cooling operation.

Completed annual cooling maintenance on EnergiAir system per 3-year service agreement. Performed comprehensive inspection of HVAC equipment including furnace unit, condensate pump assembly, gas connections, and associated plumbing and electrical components. All systems tested and verified operational with no issues found; unit running within manufacturer specifications.

Completed comprehensive ASTU-AC Super Tune-up on dual 17-year-old HVAC system including both furnace and air conditioning unit. Performed full system inspection, tested all electrical connections at breaker panel, verified proper circuit operation and labeling, inspected outdoor condensing unit including fan operation and refrigerant lines, cleaned and serviced both heating and cooling components, and documented system condition with photos. All equipment operating within normal parameters upon completion.

Completed annual cooling maintenance on 9-year-old ICP air conditioning system. Performed standard tune-up procedures including system inspection, cleaning, and performance verification. Observed and documented significant sediment accumulation in condensate drain pan, indicating drainage system required attention; cleared blockage and flushed drain line to restore proper condensate removal and prevent potential water damage or system shutdown.

Completed annual cooling system maintenance on a 9-year-old air conditioning unit. Performed comprehensive tune-up including inspection of all major components, electrical connections, refrigerant levels, and condensate drainage system. Documented equipment condition with photos showing furnace installation, PVC condensate piping, ductwork connections, and radon reduction system present in mechanical room; all systems operating within normal parameters upon completion of preventive maintenance service.

Responded to service call for poor toilet flushing performance and shower handle installation. Replaced faulty flush valve assembly in toilet to restore proper flushing function. Successfully installed new single-handle shower valve control on tiled bathtub surround, ensuring secure mounting and proper operation of water flow and temperature adjustment.

Completed full HVAC system installation including new furnace and air conditioning unit. Installed outdoor condensing unit on concrete pad with proper refrigerant line connections and PVC condensate drain line routed along exterior wall. System was charged with refrigerant, pressure-tested using manifold gauges to verify proper operating pressures, and all electrical connections were completed per manufacturer specifications.

Completed comprehensive ASTU-AC Super Tune-up on a 15-year-old Aspen refrigerant evaporator system utilizing R-410A refrigerant. Performed full system inspection, documented equipment specifications including model CCA2G175R057, verified proper operation of all components, and captured detailed photos of manufacturer labels and technical specifications for service records.

Responded to no cooling complaint with unit freezing up. Previous contractor diagnosed evaporator coil leak and recommended full system replacement due to R22 refrigerant. Upon inspection, confirmed York furnace with 2-year-old evaporator coil paired with outdoor condensing unit model YCJD36S41S1A utilizing R-410A refrigerant. Documented equipment specifications and current system configuration with photos for assessment and recommendations.

Responded to service call for multiple non-functioning outlets throughout residence and complete power loss to garage. Upon arrival, performed systematic diagnostic evaluation of electrical distribution system. Inspected main electrical panel and verified proper operation of all circuit breakers, main disconnect, and bus bar connections. Tested individual branch circuits serving affected areas using voltage meter to isolate fault locations. Identified tripped breaker supplying garage and multiple interior outlet circuits. Reset affected breakers and verified restoration of power to all previously non-functional outlets and garage electrical system. Conducted load testing on restored circuits to confirm proper amperage and verify no underlying short circuits or ground faults present. Inspected wire terminations at panel for signs of loose connections, overheating, or deterioration - all connections found secure with no visible damage. Verified proper wire sizing and circuit protection r

Completed annual cooling maintenance on EnergiAir system under 2-year tune-up agreement. Performed comprehensive inspection of unit, verified proper operation of all components, checked refrigerant levels, cleaned condensate drain system, and inspected electrical connections. Documentation photos captured equipment condition showing unit properly positioned on vibration-dampening mat with drainage lines and electrical connections in serviceable condition.

Responded to service call for non-flushing toilet. Upon arrival, inspected two-piece toilet in bathroom with shiplap paneling and identified flush mechanism malfunction. Successfully repaired flush valve assembly, restoring proper flushing operation to the unit.

# No Heat Service Call - Goodman Furnace Responded to no heat call for 18-year-old Goodman furnace blowing cold air only. Upon arrival, accessed unit in confined attic space and performed visual inspection of HVAC system components. Inspected ductwork connections, blower assembly, and associated mechanical components in cramped working conditions. Noted significant dust and debris accumulation on metallic duct elbows and connections throughout the system. Examined green blower motor assembly, flexible aluminum ductwork, and PVC condensate drainage piping. Photographed key system components for documentation purposes, including areas requiring attention due to dirt buildup on ductwork connections. System evaluated for proper airflow paths and mechanical integrity of installed components.