Top-Notch HVAC, Plumbing & Generator Services in Battle Creek, MI

Responded to service call for 12-year-old air conditioning unit with non-operational fan affecting entire system. Upon inspection, discovered severely corroded and mineral-clogged copper piping with significant internal buildup restricting flow. Documented existing wiring configuration and outdoor unit installation showing disorganized electrical connections and weathered components requiring attention. Photographed deteriorated pipe section displaying heavy scale deposits and reduced internal diameter due to hard water conditions and age-related corrosion.

Completed annual cooling maintenance on 9-year-old AC system. Performed comprehensive tune-up including inspection of blower assembly, evaporator coil access area, and internal components. Documented system condition with photos showing equipment housed in confined mechanical space with evidence of normal aging and environmental exposure. All components inspected and system operational upon completion.

Completed annual AC tune-up and preventive maintenance service on cooling system. Inspected mechanical equipment, refrigerant lines with insulation, and associated HVAC components in utility space. All systems operating within normal parameters; no immediate repairs required at this time.

Completed annual cooling system tune-up and inspection on residential HVAC unit. Verified condensate pump operation with green LED indicators showing proper function, inspected all drainage piping and connections for proper flow, and confirmed equipment is operational and ready for cooling season. All components including furnace, condensate drain pan, and associated plumbing connections were examined and found to be in satisfactory working condition.

Completed annual cooling system tune-up and preventive maintenance on Energi WT unit with warranty coverage extending through June 2035. Performed comprehensive system inspection including examination of condensate drain assembly, ductwork connections, and refrigerant lines. All components found operating within normal parameters with no deficiencies noted at time of service.

Completed annual cooling maintenance on residential air conditioning system over 10 years old. Removed significant accumulation of leaves and organic debris from condenser coil fins that was restricting airflow and reducing system efficiency. Performed refrigerant charge verification using electronic charging equipment to ensure proper system operation.

Complete air conditioning system replacement performed. Removed existing unit and installed new AC system. Upon installation completion, connected TITAN 4-Valve manifold gauge set to verify proper refrigerant pressures and system operation. Measured and confirmed refrigerant charge levels using Yellow Jacket gauge manifold on both high and low pressure sides of the system. System tested and operating within manufacturer specifications.

Completed annual cooling system tune-up and preventative maintenance inspection per 2-year warranty agreement. Verified proper operation of condensate pump in crawlspace, confirmed all drainage lines clear and functioning correctly, and documented equipment condition with photos. All system components operating within normal parameters with no immediate concerns noted.

Completed annual cooling maintenance on EnergiAir system per service agreement. Performed comprehensive tune-up including inspection of condensate pump assembly, drain lines, and utility connections in mechanical space. All components operating within normal parameters; documented equipment condition with photos for service records.

Responded to a bathtub drain clog issue. Successfully cleared the obstruction from the tub drain, restoring proper water flow and drainage function.

Conducted on-site assessment for gas line rerouting in basement of 50+ year old single-family residence with existing iron pipe service lines. Evaluated current gas line configuration, structural considerations, and accessibility for proposed renovation work. Documented existing conditions including HVAC equipment placement, electrical conduit routing, and available clearances for new gas line installation. Provided comprehensive estimate for rerouting gas piping to accommodate basement renovation plans while ensuring compliance with applicable codes and safety standards.

Responded to service call for water leak on 6-8 year old Lochinvar boiler. Upon inspection, identified severe corrosion on copper pipe fitting connected to aluminum heat exchanger block, with heavy verdigris buildup and internal scaling indicating prolonged water exposure and deterioration. Documented extensive corrosion damage with photographs showing compromised fitting integrity. Provided customer with findings and recommended repair options to address the leak source and prevent further damage to the boiler system.

Completed full air conditioning system replacement including outdoor condenser unit installed on concrete pad with proper refrigerant line connections and condensate drainage via white PVC piping. Indoor installation included Goodman furnace with integrated air handler, vertical condensate drain line, and all necessary ductwork connections. System was properly commissioned, tested for operational efficiency, and all components verified for proper function with financing documentation processed through electronic signature platform.

Completed comprehensive AC tune-up service on outdoor condensing unit of unknown age and brand. Performed thorough inspection of system components, cleaned heavily soiled electronic control board showing significant dirt and debris accumulation with white residue buildup, and verified proper operation of all accessible components including fan motor and condenser coil. Unit operational upon completion with all safety checks passed.

Completed add-on air conditioning system installation to existing forced-air heating system. Installed outdoor condensing unit on concrete pad with proper clearances from building exterior and electrical disconnect. Ran refrigerant lines from outdoor unit through building envelope to basement mechanical room. Integrated evaporator coil with existing furnace and connected to supply ductwork. Installed necessary electrical connections, tested system operation, and verified proper airflow and refrigerant charge levels.

Completed full air conditioning system replacement and installation in residential basement location. New HVAC unit installed with proper venting system including white PVC piping with multiple connections and drainage components, secured with metal support brackets. All ductwork connected to existing infrastructure, system tested and operational, financing documentation processed and secured through Michigan Saves program.

Completed annual cooling maintenance on 7-year-old Payne air conditioning system. Unit exterior compartment was found heavily contaminated with organic debris including leaves, twigs, and plant matter that had accumulated throughout the mechanical section and around electrical components. Performed thorough cleaning of condenser compartment, removing all organic debris from around compressor, electrical controls, and wiring connections. Cleaned condensate drain pan which showed signs of dust accumulation. Inspected all electrical connections and wiring for damage from debris exposure - all connections found secure despite contamination. Verified proper operation of compressor and electrical components following cleaning. System restored to clean operating condition and tested successfully.

Responded to low water pressure complaint and performed comprehensive diagnostic evaluation of residential hydronic heating system and domestic water supply. Upon inspection, identified and assessed circulator pump operation, pressure reducing valve assembly, zone valves, expansion tank, and system pressure gauge mounted on basement mechanical room wall. Verified proper function of all heating system components including boiler unit, copper distribution piping, isolation valves, and circulation equipment. Documented existing system configuration with photos showing complete installation layout and component arrangement for service records.

Completed annual cooling maintenance on residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, which showed signs of dirt accumulation and cobwebbing on cooling fins, and indoor HVAC components including ductwork and associated mechanical systems. Unit identified with equipment tag #3G329603. Verified proper operation of all system components, inspected refrigerant lines, electrical connections, and ductwork integrity. System operational at time of departure with vegetation noted around outdoor unit base.

Completed annual cooling system tune-up and maintenance inspection on EnergiAir unit. Performed comprehensive evaluation of condensate pump motor and drainage system, verified proper operation of all electrical connections and wiring, and confirmed PVC discharge line functionality. All components operating within normal parameters with no issues identified.