Top-Notch HVAC, Plumbing & Generator Services in Battle Creek, MI

Completed annual cooling maintenance on EnergiAir system per 3-year service agreement. Performed comprehensive inspection of HVAC equipment including furnace unit, condensate pump assembly, gas connections, and associated plumbing and electrical components. All systems tested and verified operational with no issues found; unit running within manufacturer specifications.

Completed comprehensive ASTU-AC Super Tune-up on dual 17-year-old HVAC system including both furnace and air conditioning unit. Performed full system inspection, tested all electrical connections at breaker panel, verified proper circuit operation and labeling, inspected outdoor condensing unit including fan operation and refrigerant lines, cleaned and serviced both heating and cooling components, and documented system condition with photos. All equipment operating within normal parameters upon completion.

Completed annual cooling maintenance on 9-year-old ICP air conditioning system. Performed standard tune-up procedures including system inspection, cleaning, and performance verification. Observed and documented significant sediment accumulation in condensate drain pan, indicating drainage system required attention; cleared blockage and flushed drain line to restore proper condensate removal and prevent potential water damage or system shutdown.

Completed annual cooling system maintenance on a 9-year-old air conditioning unit. Performed comprehensive tune-up including inspection of all major components, electrical connections, refrigerant levels, and condensate drainage system. Documented equipment condition with photos showing furnace installation, PVC condensate piping, ductwork connections, and radon reduction system present in mechanical room; all systems operating within normal parameters upon completion of preventive maintenance service.

Responded to service call for poor toilet flushing performance and shower handle installation. Replaced faulty flush valve assembly in toilet to restore proper flushing function. Successfully installed new single-handle shower valve control on tiled bathtub surround, ensuring secure mounting and proper operation of water flow and temperature adjustment.

Completed full HVAC system installation including new furnace and air conditioning unit. Installed outdoor condensing unit on concrete pad with proper refrigerant line connections and PVC condensate drain line routed along exterior wall. System was charged with refrigerant, pressure-tested using manifold gauges to verify proper operating pressures, and all electrical connections were completed per manufacturer specifications.

Completed comprehensive ASTU-AC Super Tune-up on a 15-year-old Aspen refrigerant evaporator system utilizing R-410A refrigerant. Performed full system inspection, documented equipment specifications including model CCA2G175R057, verified proper operation of all components, and captured detailed photos of manufacturer labels and technical specifications for service records.

Responded to no cooling complaint with unit freezing up. Previous contractor diagnosed evaporator coil leak and recommended full system replacement due to R22 refrigerant. Upon inspection, confirmed York furnace with 2-year-old evaporator coil paired with outdoor condensing unit model YCJD36S41S1A utilizing R-410A refrigerant. Documented equipment specifications and current system configuration with photos for assessment and recommendations.

Responded to service call for multiple non-functioning outlets throughout residence and complete power loss to garage. Upon arrival, performed systematic diagnostic evaluation of electrical distribution system. Inspected main electrical panel and verified proper operation of all circuit breakers, main disconnect, and bus bar connections. Tested individual branch circuits serving affected areas using voltage meter to isolate fault locations. Identified tripped breaker supplying garage and multiple interior outlet circuits. Reset affected breakers and verified restoration of power to all previously non-functional outlets and garage electrical system. Conducted load testing on restored circuits to confirm proper amperage and verify no underlying short circuits or ground faults present. Inspected wire terminations at panel for signs of loose connections, overheating, or deterioration - all connections found secure with no visible damage. Verified proper wire sizing and circuit protection r

Completed annual cooling maintenance on EnergiAir system under 2-year tune-up agreement. Performed comprehensive inspection of unit, verified proper operation of all components, checked refrigerant levels, cleaned condensate drain system, and inspected electrical connections. Documentation photos captured equipment condition showing unit properly positioned on vibration-dampening mat with drainage lines and electrical connections in serviceable condition.

Responded to service call for non-flushing toilet. Upon arrival, inspected two-piece toilet in bathroom with shiplap paneling and identified flush mechanism malfunction. Successfully repaired flush valve assembly, restoring proper flushing operation to the unit.

# No Heat Service Call - Goodman Furnace Responded to no heat call for 18-year-old Goodman furnace blowing cold air only. Upon arrival, accessed unit in confined attic space and performed visual inspection of HVAC system components. Inspected ductwork connections, blower assembly, and associated mechanical components in cramped working conditions. Noted significant dust and debris accumulation on metallic duct elbows and connections throughout the system. Examined green blower motor assembly, flexible aluminum ductwork, and PVC condensate drainage piping. Photographed key system components for documentation purposes, including areas requiring attention due to dirt buildup on ductwork connections. System evaluated for proper airflow paths and mechanical integrity of installed components.

Completed QUOTR-quoted repair involving control board replacement in utility area. Assessed and photographed existing plumbing infrastructure showing aged copper piping with mineral deposits and corroded valve fixtures. Successfully replaced faulty control board, restoring system functionality within the estimated one-hour timeframe.

Responded to no cooling complaint on 4-year-old Goodman system with condenser unit not running. Upon arrival, found condenser fan motor failed and debris accumulation in outdoor unit restricting airflow. Removed leaves and organic material from condenser cabinet, tested electrical components, and confirmed fan motor failure. Replaced condenser fan motor, cleared all debris from unit, verified proper amperage draw and capacitor operation. System restored to normal cooling operation with proper airflow and refrigerant pressures. Enrolled customer in annual maintenance program and collected voided check for automatic payment setup as requested.

Responded to service call for Lochinvar water heater not operating following power outage. Upon arrival, inspected unit and verified power supply had been restored to the building. Checked electrical connections and control board, finding the unit had not automatically reset after power interruption. Reset control system and verified proper ignition sequence, burner operation, and flame sensing. Tested water heater through complete heating cycle, confirming unit returned to normal operation with proper temperature control and safety functions operational.

Completed annual cooling maintenance on EnergiAir system under active warranty coverage through June 2033. Performed comprehensive tune-up including inspection of blower motor assembly, verified proper operation of all mechanical components, checked refrigerant lines and condensate drainage system, and documented equipment condition with photographs. All systems operating within manufacturer specifications with no deficiencies noted.

Completed annual cooling maintenance on 5-year-old Amana system installed in 2023. Performed standard tune-up procedures including inspection of refrigerant lines, electrical connections, and mechanical components. Documented existing water damage on ceiling near drainage lines and noted copper tubing routing in attic space, as well as gas line connections and water heater assembly in mechanical area for reference.

Completed annual cooling system tune-up and maintenance inspection on EnergiAir unit. Performed standard preventive maintenance procedures, verified system operation, and documented equipment condition with photos including condensate pump assembly and associated drainage components. All systems operating within normal parameters upon completion.

# Furnace Super Tune-Up Completed Performed comprehensive tune-up service on furnace system over 10 years old. Conducted full system inspection, cleaned and tested all components, verified proper operation of safety controls, and checked combustion efficiency. During inspection, documented significant corrosion and rust deterioration on gas piping connections and elbows, particularly around threaded joints where moisture exposure has caused metal degradation. Noted galvanized piping showing advanced surface corrosion with flaking material present. System operational at time of service completion, though corroded gas piping will require future attention and replacement to prevent potential safety concerns.

Responded to service call for furnace not cycling properly, requiring manual breaker reset to operate. Accessed property using lockbox per instructions and entered through rear entrance. Diagnosed and repaired cycling issue on 2-year-old furnace unit. Verified proper operation through multiple heating cycles. Reset thermostat to 55 degrees per customer request and secured property upon completion.