Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Completed installation of a 40-gallon natural draft natural gas water heater (tall tank, 56 5/8") with recirculation pump system in utility area. Installation included proper gas control valve assembly, copper supply and discharge piping with brass fittings, and integration of existing recirculation system with pump mounted atop the unit. All connections were secured, system was tested for proper operation, and installation was completed with 6-year parts and 1-year labor warranty coverage.

Completed comprehensive HVAC load calculation assessment for mini-split and ERV installation, documenting heating load of 51,803 BTU and cooling load of 24,017 BTU based on building envelope analysis including ceiling, walls, infiltration, glazing, occupancy, and equipment factors. Captured detailed load calculation spreadsheet to support proper equipment sizing and system design for the proposed ductless mini-split system installation.

# PRMISC-Misc Plumbing Repair ## Work Performed Responded to service call for tub and shower unit requiring assessment and repair. Upon arrival, conducted thorough inspection of white fiberglass bathtub and shower surround combination unit. Identified significant water damage along right edge of shower surround where wall panel meets adjacent wall surface. Noted exposed brown wooden framing material with visible water intrusion damage, including yellowish-green staining at base near tub edge, indicating prolonged moisture exposure. Deterioration pattern suggested compromised seal between surround panel and wall structure, allowing water to penetrate behind shower enclosure. Documented existing bathroom fixtures including chrome shower head with flexible metal hose, circular temperature control valve, tub spout, and properly functioning drain. Verified two brushed nickel grab bars mounted on shower walls for safety compliance. Observed hanging chrome shower caddy organizer suspende

Completed annual cooling system maintenance and tune-up on residential air conditioning unit. Performed comprehensive inspection of all system components, verified refrigerant levels, cleaned condenser coils, and tested electrical connections to ensure optimal performance for the cooling season. Manual control humidifier installation scheduled for completion during return visit to finalize HVAC system upgrades.

Completed water heater estimate for 16-year-old Lochinvar unit located in basement utility area alongside Precise Comfort furnace. Documented existing installation including all piping connections, venting configuration, and surrounding mechanical infrastructure through detailed photography for replacement proposal.

Responded to no cooling call and performed diagnostic inspection of HVAC control board assembly. Upon examination, documented the electronic control board configuration including integrated circuits, capacitors, relay switches, and wire terminations within the white plastic enclosure. Board appeared to be properly mounted and secured with visible terminal connections intact. Captured detailed photographs of the control board assembly for service records and further analysis of the system's electronic components and wiring configuration.

Relocated Generac standby generator unit to new position along side of residence per client request. Generator was disconnected, moved from original location, and reinstalled on prepared gravel pad with proper clearances from structure and adjacent HVAC equipment. Unit was reconnected, tested for proper operation, and site was left clean and organized with landscaping materials staged for completion of surrounding area.

Completed comprehensive two-year tune-up service on Generac generator unit. Performed standard maintenance procedures including inspection of all mechanical components, hoses, connections, and filters; verified proper operation of fuel system and all associated fittings; and documented equipment condition through photographic records to ensure system reliability and continued optimal performance.

Completed annual cooling maintenance on 2023 Bryant AC system. Performed comprehensive tune-up including system inspection, verified REME HALO UV air purifier operational status and proper mounting on ductwork, and measured capacitor reading at 96.6 MFD to confirm electrical component performance within specifications.

Completed installation of a 40-gallon Bradford White natural gas water heater in residential utility room. Unit was properly positioned, connected to existing copper water supply lines with brass fittings and compression valves, and vented with metallic ductwork including elbow joint for proper exhaust routing. All plumbing connections, gas line hookups, temperature and pressure relief valve, and safety controls were installed per manufacturer specifications and local code requirements.

Responded to service call for humidifier hookup and AC unit evaluation. Upon arrival, assessed 6-year-old Goodman air conditioning condenser unit currently positioned on black plastic pad in residential yard. Confirmed unit is sitting at an improper angle, which can affect drainage and long-term performance. Discussed relocation options with customer to address leveling concerns and improve overall system positioning. Documented current installation conditions through photographs showing unit placement on uneven ground with displaced concrete support blocks nearby. Provided recommendations for proper leveling and potential repositioning of outdoor condenser unit to ensure optimal operation and longevity.

Responded to service call for 13-year-old tank-style water heater producing unusual noises while still providing hot water. Performed comprehensive inspection of unit, examining all plumbing connections, pressure relief valve, and heating elements. Assessed condition of copper supply lines, shut-off valves, and venting system. Evaluated sediment buildup as likely cause of noise based on unit age and operational symptoms. Documented current state of water heater with photographs showing all connections, labels, and surrounding utility space. Confirmed unit is functioning and producing hot water but recommended monitoring given age of equipment approaching typical service life expectancy. Provided assessment findings to customer regarding replacement considerations.

Completed full air conditioning system installation including outdoor condensing unit and indoor evaporator coil integration with existing furnace. Installed and connected copper refrigerant lines with proper insulation, established electrical connections, and integrated new AC components with current heating system. Charged system with refrigerant, verified proper operation of all components, and confirmed airflow through existing ductwork. Tested system performance with temperature differential readings showing 107°F and 104°F at service ports, indicating proper refrigerant charge and system operation. Installed required venting modifications using PVC piping for condensate drainage and secured all connections per manufacturer specifications. System operational and performing within normal parameters upon completion.

Completed full air conditioning system replacement at residential property. Installed new outdoor condensing unit on existing concrete pad against exterior foundation, ensuring proper placement and secure mounting. System was commissioned, tested for proper operation, and left in full working order with all refrigerant lines connected and electrical connections verified.

Completed annual cooling maintenance on 17-year-old air conditioning system. Performed comprehensive tune-up inspection of all major components, verified proper refrigerant levels, checked electrical connections, and confirmed system operational efficiency. Updated customer contact information and documented equipment condition with photos of condensate drain assembly and internal mechanical compartment showing all connections secure and functioning properly.

Completed full HVAC system installation including outdoor Amana condensing unit positioned in side yard on concrete paver pad with proper clearances and indoor furnace with air handler in basement mechanical room. Ran refrigerant line set from exterior unit through wall penetration with secure mounting brackets and proper insulation. Installed white PVC condensate drain piping and venting system connected to furnace, routed along basement ceiling to code-compliant termination points. Positioned equipment on protective pads over concrete surfaces. Connected all electrical components, verified proper voltage and amperage to both indoor and outdoor units. Pressure tested refrigerant lines for leaks, evacuated system, and charged to manufacturer specifications. Verified airflow, temperature split, and proper cycling of both heating and cooling modes. All installations meet current building codes and manufacturer requirements for warranty compliance.

Completed spigot replacement on corroded vertical supply line. Removed existing deteriorated pipe assembly showing significant rust and corrosion at joint connections, installed new spigot fixture with proper sealing to restore water flow and prevent leaks.

Completed annual cooling maintenance on 7-year-old Comfortmaker air conditioning system. Performed comprehensive tune-up including system inspection, tested all electrical components and controls, cleaned condensate drain pan which showed moderate debris accumulation, verified proper operation of safety switches, and documented equipment condition with photos. Unit operating within normal parameters upon completion.

Completed full air conditioning system replacement at residential property. Installed new outdoor condensing unit on existing concrete pad adjacent to building exterior, ensuring proper leveling and secure mounting. Connected refrigerant lines, electrical service, and PVC condensate drain line with upward routing along building siding, verifying all connections met manufacturer specifications and local code requirements.

Completed full residential HVAC system installation including new Amana furnace and outdoor AC condenser unit. Furnace installed in interior mechanical room with proper venting using white PVC piping, connected to existing ductwork infrastructure, and integrated with water heater utilities. Outdoor condenser unit positioned on concrete pad against exterior wall with appropriate clearances, electrical disconnect box mounted, refrigerant lines and conduit properly routed through siding. All equipment secured, tested for proper operation, and system commissioned to manufacturer specifications.