HVAC & Plumbing Services in Grand Rapids, MI

Completed annual heating tune-up on 11-year-old Everest furnace system with integrated humidifier. Inspected all components, verified proper operation of intake/exhaust PVC piping, and confirmed system is functioning within manufacturer specifications. Equipment is located in basement mechanical area adjacent to water heater.

Performed inspection of a 2009 40-gallon gas water heater with recurring pilot light failure issues. Examined the existing ventilation system, which includes galvanized steel ductwork, flexible stainless steel water lines, and brass fittings. Provided customer with replacement options for complete tank installation and removal of the aging unit.

Performed annual heating service on a 3-year-old Lennox system. Observed corrosion at the condensate drain connection with visible rust deposits around the rubber gasket. Completed standard furnace tune-up; system is now operating within normal parameters.

Conducted inspection and installation of new garbage disposal system in 1960s single-family residence. Existing plumbing under sink features standard PVC drain assembly with P-trap configuration and copper supply lines, all in good working condition. Documented current plumbing setup with photos to ensure proper installation compatibility with the home's 60-year-old plumbing infrastructure.

Completed diagnostic assessment of 16-year-old water heater with temperature regulation issues. Unit is still functional but showing age-related performance decline. Provided customer with replacement options and quote as requested, documenting current installation configuration with photos for proper sizing of potential replacement unit.

Successfully completed furnace installation in basement utility area. Installed new residential HVAC unit with proper PVC venting, condensate drainage system, and connection to existing ductwork. System was tested and verified to be functioning correctly.

Performed complimentary annual boiler tune-up on 16-year-old system with CM from 2020. Inspection revealed significant copper pipe corrosion with rust and teal-colored oxidation at solder joints. Used DEPSTECH camera to examine interior piping, documenting extensive internal corrosion and sediment buildup that requires attention.

Installed nail plates to protect plumbing lines and properly supported piping in wall bays. Upgraded to larger laundry box and hard-piped gas line connection to laundry box per code requirements. All work completed in coordination with other trades to ensure proper installation within framed wall cavity.

Responded to urgent service call for 10-year-old water heater not producing hot water. Diagnosed failed thermocouple and gas valve issues causing pilot light failure. Replaced thermocouple assembly and recalibrated gas valve, restoring proper hot water function and confirming safe operation before departure.

Successfully completed bathroom group water line relocation as part of two-day CWOW plumbing project. Installed new PVC drain assembly with P-trap and properly secured water supply lines beneath both bathroom vanity and kitchen sink. All connections were verified for proper function with no leaks observed.

Completed annual heating maintenance on an Energi Elite Series furnace (Model WT 03-2035, manufactured 2020). Performed comprehensive tune-up including inspection of PVC venting system, condensate drainage, and connection points. System is functioning properly with no humidity issues identified.

Performed annual heating maintenance on 11-year-old Trane furnace. Conducted electrical system inspection and diagnostic testing of control components. System is operating within specifications; no immediate concerns identified.

Inspected 14-year-old Bradford White water heater (2009 installation) due to customer complaint of shortened hot water availability during showers. Visual examination revealed aging unit with standard wear. Recommended replacement due to unit age and declining performance rather than repair, as efficiency and reliability will continue to deteriorate.

Performed annual heating maintenance service on a 13-year-old ICP furnace system. Inspected and tested all components for proper operation; no immediate issues identified with the furnace unit. Replaced air filter as part of routine maintenance to ensure optimal system performance.

Conducted comprehensive assessment of existing HVAC system, including furnace and AC unit located in basement utility room. Documented current installation configuration (furnace with PVC venting, round metal ductwork) and evaluated cooling performance issue regarding insufficient cold air output from AC. Provided estimate for furnace and AC replacement options and discussed Nest thermostat installation requirements with customer.

Completed annual heating service on a 12-year-old furnace and humidifier system. Inspected air handling unit, noting dust accumulation on the fan blades and housing. Observed some debris and discoloration on the filter frame and mesh, suggesting regular maintenance is required to maintain optimal system performance.

Completed annual furnace tune-up on 8-year-old Payne heating system. Performed comprehensive maintenance service with no issues identified. System is functioning properly with all components in good working condition.

Responded to service call for toilet not flushing properly. Diagnosed and determined the issue was a defective flapper valve causing incomplete flush cycles. Replaced flapper valve, adjusted water level in tank, and tested multiple flush cycles to confirm proper operation. Toilet now functioning correctly with complete water evacuation and refill.

Responded to no-heat call for 10-year-old EnergiAir system (2011 model). Inspected HVAC installation including ductwork, damper mechanisms, and zone control system. Identified issue with Isolatemp CT-2 zone controller not properly communicating with Aprilaire thermostat, preventing furnace activation. Recalibrated control settings to restore proper heating function.

Successfully installed new Aprilaire humidifier on client's HVAC system per specifications. Relocated water line to hot water side and repositioned humidistat 6" higher above the new unit. System was properly connected to existing ductwork and tested to ensure proper functionality.