HVAC & Plumbing Services in Grand Rapids, MI

Responded to no-heat call for 10-year-old EnergiAir system (2011 model). Inspected HVAC installation including ductwork, damper mechanisms, and zone control system. Identified issue with Isolatemp CT-2 zone controller not properly communicating with Aprilaire thermostat, preventing furnace activation. Recalibrated control settings to restore proper heating function.

Successfully installed new Aprilaire humidifier on client's HVAC system per specifications. Relocated water line to hot water side and repositioned humidistat 6" higher above the new unit. System was properly connected to existing ductwork and tested to ensure proper functionality.

Diagnosed heat pump system failing to reach setpoint temperature. Installed new condensate pump with proper electrical connections and PVC drain line configuration. System now heating properly and maintaining temperature as designed.

Performed scheduled annual maintenance on EnergiAir furnace model WT 06-2034. Inspected all components including ventilation system and condensate drainage assembly. Unit is operating within normal parameters; no humidity issues detected.

Performed annual maintenance on 9-year-old EnergiAir furnace (warranty through 2025). Completed full tune-up including inspection of internal components, wiring connections, motor assembly, and fan system. System is operating properly with no humidifier present; noted environmental concerns including basement mold that should be addressed for optimal indoor air quality.

Performed comprehensive assessment of existing water heater installation in basement utility area, documenting current configuration with photographs. Evaluated copper supply lines, PVC drainage/ventilation components, and electrical connections to determine appropriate replacement options. Provided estimate for water heater replacement based on inspection findings (CWOW reference #231-343-3294, CM 2024).

Performed annual maintenance on 5-year-old Goodman furnace. Cleaned severely contaminated condensate drain pan to prevent potential blockage and water damage. No humidifier present in the system. System is now operating properly with preventive maintenance completed.

Responded to noise complaint on aging furnace system. Inspection revealed rusted blower wheel causing imbalance and noise during operation. Cleaned corrosion from blower assembly, lubricated motor bearings, and secured loose mounting hardware to eliminate noise issue.

Successfully repaired dual-sink vanity with right faucet leak and left sink slow water flow issues. Disassembled and serviced both faucet assemblies, replacing worn components and clearing mineral buildup to restore proper water pressure and eliminate leakage.

Returned to service Duratex boiler system showing 96% efficiency reading. Performed previously quoted repairs, including replacement of corroded copper piping and electrical connections. System is now operational with all components properly secured and tested.

Completed annual heating maintenance on furnace as part of recurring service agreement. Disassembled unit for thorough inspection, cleaned components, and checked electrical connections. Serviced attached humidifier and verified system operation before reassembly.

Successfully installed new residential furnace unit with complete ductwork integration including return plenum with metallic insulation and proper PVC ventilation/condensate lines. System was professionally mounted with appropriate clearances against foundation wall, with all electrical components connected and secured according to manufacturer specifications.

Completed installation of new residential furnace system alongside existing water heater in mechanical room. System properly connected to existing ductwork with all necessary piping and electrical connections made according to manufacturer specifications. Final payment collected upon successful completion and system testing.

Diagnosed excessive noise from 15-year-old Modine Hot Dog garage heater. Inspection revealed worn fan bearings causing operational noise. Replaced fan assembly and lubricated moving components to eliminate noise and restore proper functionality.

Successfully completed full replacement of residential HVAC system, installing new furnace in utility area with proper ductwork, exhaust venting, and drainage connections. Exterior AC unit was positioned on concrete pad with appropriate electrical and refrigerant line connections, and system was tested to ensure proper operation.

Successfully removed and disposed of existing toilet, replacing toilet bolts, wax ring, and supply line. Installed new American Standard Comfort Height Elongated Toilet with Slow Closing Seat in customer's bathroom, completing the quoted repair work.

Responded to service call for a non-functioning furnace with blank thermostat. Upon inspection, found thermostat had no batteries installed. Inspected water heater installation and surrounding plumbing infrastructure while on site, noting Bradford White units with proper venting and copper supply lines in good working condition.

Diagnosed and serviced HVAC system exhibiting no heat symptoms. Identified condensate drain line with significant mineral buildup and staining, indicating potential blockage or previous leakage. Cleaned affected PVC drainage components and restored proper condensate flow to resolve system lockout condition.

Inspected 18-year-old Goodman furnace with reported leakage issues at exhaust exit and collector box. Visually confirmed condensation leakage from heat exchanger connections, indicating secondary heat exchanger failure. Recommended complete system replacement due to age of equipment and extent of deterioration.

Responded to service call for reported leaks under all sinks. Upon inspection, examined P-trap assemblies, supply lines, and connection points at multiple sink locations. Completed necessary repairs to eliminate leaks and verified proper drainage function with no remaining moisture issues.