Top-Rated HVAC & Plumbing Services in Spring Lake, MI

Completed comprehensive AC Super Tune-up on 15-year-old system. Removed significant accumulation of leaves and organic debris from outdoor unit enclosure, inspected electrical connections and refrigerant lines, verified proper system operation, and documented equipment condition with photos. All components functioning within normal parameters upon completion.

Completed full HVAC system installation including new Amana air conditioning condenser unit and furnace. Outdoor condenser positioned on concrete pad against exterior wall with proper electrical disconnect box, refrigerant line installation, and secure mounting of all components. Indoor furnace installed in basement mechanical room with complete ductwork connections, proper ventilation, and integration with existing distribution system.

Completed annual cooling maintenance and tune-up on outdoor condensing unit. Performed comprehensive system inspection including electrical connections, refrigerant levels, and mechanical components. Verified proper operation of condenser fan motor and compressor. Cleaned condenser coils and checked drainage system functionality. Unit operating within normal parameters with no immediate concerns noted. System ready for cooling season.

Removed existing dishwasher from under-counter installation and successfully installed customer-supplied stainless steel replacement unit. Connected dishwasher drain line to existing garbage disposal knockout and verified proper water supply connections to ensure leak-free operation and code compliance.

Completed comprehensive Super Tune-up service on three air conditioning systems: a 25-year-old Heil unit, a 24-year-old Trane unit, and a 2-year-old system under warranty until September 2032. Inspected electrical contactors showing significant wear, corrosion, and oxidation on contact surfaces; documented aging components with accumulated debris and tarnished brass connections secured with cable ties for continued monitoring.

Conducted on-site evaluation of existing 16-year-old furnace and air conditioning system for replacement estimate. Inspected basement mechanical room installation, documenting current HVAC equipment configuration, electrical panel capacity and circuit availability, ductwork layout, and clearance requirements. Photographed existing water heater placement and utility connections to assess spatial considerations for new equipment installation. Reviewed electrical service panel to verify adequate breaker capacity for upgraded HVAC system requirements. Provided comprehensive replacement options and equipment recommendations for complete furnace and air conditioning system upgrade.

Completed annual cooling maintenance on a 2016 EnergiAir system. Inspected and serviced all components including condensate drainage system with PVC piping and pump assembly, verified proper operation of all mechanical equipment, and documented system condition with photos. Unit operating within normal parameters following tune-up procedures.

Responded to no cooling complaint on 10-year-old Bryant air conditioning system. Upon arrival, confirmed unit was running but delivering warm air to conditioned space. Performed diagnostic evaluation of outdoor condensing unit using clamp meter to measure electrical amperage and verify compressor operation. Connected refrigerant manifold gauges with standard blue and yellow hoses to service ports to assess system pressures and refrigerant charge levels. Testing revealed abnormal operating pressures consistent with refrigerant loss. Identified system deficiency and completed necessary repairs to restore proper cooling function. Unit tested and verified operational upon completion of service work.

Completed Super Tune-up on 10-year-old Payne AC system with furnace located in crawl space accessed from basement. Performed comprehensive inspection of all system components, verified proper operation of condensate pump unit, checked drain line functionality, and confirmed all equipment operating within manufacturer specifications.

Completed installation of residential water heater in basement utility area. Installed new white cylindrical water heater unit against concrete wall with proper copper piping connections for hot and cold water lines, brass fittings, and metallic vent pipe extending upward. Secured unit with yellow safety restraint chain per code requirements, verified all manufacturer labels and Energy Guide documentation are visible and intact, and ensured proper clearances from electrical panel and adjacent PVC plumbing. Unit is operational and ready for service.

Responded to service request for gas line estimate to pool heater. Conducted on-site assessment of basement utility area to evaluate existing gas infrastructure and determine routing requirements for new gas line installation. Documented current plumbing and mechanical equipment layout, including water heater placement, sump pump system, and existing copper piping configuration. Photographed utility room conditions to support estimate preparation for proposed gas line extension work.

Completed annual ASTU-AC Super Tune-up on 27-year-old Bryant HVAC system. Performed comprehensive inspection of furnace and air handler components, verified proper operation of all safety controls, checked electrical connections, and tested system performance. Observed condensate drain pan showing mineral deposits and biological growth accumulation; cleaned drain line and pan, ensured proper drainage function. Inspected ductwork routing, water heater connections, and gas line installations in mechanical room. All equipment operating within normal parameters following maintenance completion.

Responded to no-heat call with thermostat displaying blank screen following recent VHC installation. Upon arrival, traced issue to R-wire disconnect at furnace control board that occurred during previous service visit. Reconnected thermostat common and power wiring at furnace terminal strip, verified proper 24VAC voltage supply, and confirmed thermostat display restored to normal operation. Tested heating cycle through complete sequence; furnace ignited properly and system operated as designed with no further issues noted.

Completed installation of new kitchen plumbing fixtures including double-basin stainless steel sink with modern brushed stainless steel high-arc faucet, garbage disposal unit, and dishwasher connections. All plumbing connections secured with proper PVC drainage piping and supply lines installed per code, with system tested and verified leak-free upon completion.

Completed annual cooling maintenance on 2023 Goodman system as part of routine service plan. Performed comprehensive tune-up including system inspection, cleaning, and operational testing. All HVAC components checked and verified to be functioning properly with no issues found during visit.

Completed annual heating maintenance on two furnace systems and one humidifier located in crawl space as part of club membership benefits. Performed comprehensive tune-up procedures including filter inspection, burner cleaning, heat exchanger examination, blower motor lubrication, electrical connection verification, and combustion analysis on both heating units. Inspected humidifier operation, verified water supply connections, cleaned mineral deposits from distribution tray, and confirmed proper drainage through PVC piping system. All systems tested and confirmed operational with no deficiencies noted at time of service.

Responded to kitchen sink drain running slow. Upon arrival, found that homeowner had already cleaned disposal and P-trap but blockage persisted further downstream. Accessed cabinet area and inspected PVC drainage system, P-trap configuration, and garbage disposal unit. Cleared obstruction in drain line beyond the trap using appropriate drain cleaning equipment. Tested system by running water through sink and disposal to verify proper drainage flow restored. Left work area clean with all plumbing connections secure and leak-free.

Completed comprehensive ASTU-AC Super Tune-up on 15-year-old air conditioning system. Performed full system inspection including refrigerant level check, electrical component testing, condenser coil cleaning, and air filter evaluation. Assessed outdoor condensing unit mounted on exterior wall pad, verified proper drainage from condensate system, and inspected all accessible connections. Provided customer with efficiency improvement recommendations for aging system and delivered detailed quote for future gas line extension to accommodate planned pool heater installation scheduled for April.

Responded to emergency plumbing call for exterior hose bib that was continuously leaking and would not shut off. Upon arrival, assessed the faulty outdoor faucet mounted on the side of the building and determined the valve mechanism had failed, preventing proper water shutoff. Completed necessary repairs to stop the active leak and restore proper function to the exterior water spigot, eliminating water waste and preventing potential foundation damage from continuous water discharge.

Installed condensate drainage system for refrigeration unit. Added white PVC piping with proper elbow joints and secured condensate line routing using metal hose clamps with adjustment mechanisms. Connected condensate pump with indicator lights and integrated electrical transformer to ensure proper drainage operation and prevent water accumulation issues.