Top-Rated HVAC & Plumbing Services in Spring Lake, MI

Completed full HVAC system replacement including outdoor Trane condenser unit and indoor air handler components. Installed new condensing unit on exterior concrete pad with proper electrical disconnect and conduit connections, along with refrigerant line set and condensate drainage piping. Interior installation included new air handler positioned in basement utility area with integrated furnace system, properly configured PVC venting, electrical connections, and ductwork integration to existing distribution system.

Responded to water leak complaint on 8-year-old Goodman air conditioning system that was still cooling effectively. Upon inspection, identified moisture accumulation in the drain pan with visible water pooling and discoloration around PVC drain line connections, indicating a condensate drainage issue. Documented the condition of the drain pan and piping connections with photographs for service records.

Responded to water leak near HVAC system and cooling failure. Upon inspection, identified active leak at condensate drain connection point with visible rust staining and moisture accumulation in drain pan beneath furnace and air handler unit. Documented system condition showing deteriorated PVC drain line connection and debris buildup affecting proper drainage. Assessed AC cooling issue in conjunction with moisture problem, photographed warning labels, piping configuration, and overall equipment condition for service records.

Responded to kitchen drain complaint with clogged left sink basin, non-functional garbage disposal, and foul odor. Accessed under-sink plumbing to diagnose disposal malfunction and drain blockage. Inspected P-trap configuration and disposal connections, cleared obstruction from drain line, and restored proper drainage flow to kitchen sink. Also addressed slow-draining bathtub during service visit.

Responded to service call for two plumbing issues: outdoor faucet with continuously spinning handle and leaking pipe beneath automatic urinal flush valve in upstairs bathroom. Inspected exterior hose bib mounted on building foundation through vinyl siding—handle exhibited complete rotation indicating stripped stem or seat assembly. Accessed attic crawl space to evaluate urinal supply system; identified leak at connection point below automatic flush valve where PEX supply lines and PVC drain lines converge. Photographed both locations for documentation. Replaced faulty outdoor faucet valve stem assembly and tightened compression fittings. Repaired leaking connection at urinal valve using appropriate sealant and secured all supply line connections. Tested both repairs under full water pressure to confirm proper operation and verify no residual leaks.

Completed estimate for air conditioning system addition to existing residential HVAC installation. Evaluated current furnace and air handler setup in basement mechanical room, documented existing electrical panel capacity and circuit availability for new AC unit integration. Assessed refrigerant line routing requirements and confirmed adequate space for outdoor condenser placement and connection to indoor equipment.

Removed existing venting from water heater and furnace, then installed new 4" venting from water heater and tied it into new B-vent from furnace. All venting components were properly secured and connected to ensure safe exhaust of combustion gases from both appliances.

Responded to no heating or cooling call on EnergiAir system (2021 model, warranty through March 2028). Upon inspection, discovered significant condensation accumulation on equipment panels and internal components, indicating moisture-related issues affecting system operation. Documented excessive water droplets on metal surfaces and condensation on glass panels, along with grease and debris buildup on interior components. System evaluated and findings photographed for warranty documentation purposes.

# NC-No Cool Service Completed Responded to no cooling call with no air flow from vents. Upon inspection, found HVAC system pressure switches indicating fault condition. Identified condensate drainage issue with visible water accumulation on drain line and components. Cleared condensate line blockage causing safety switch activation and system shutdown. Verified pressure switch operation and proper drainage flow. Tested system startup and confirmed normal air flow restored through all vents. Unit returned to normal cooling operation with proper airflow and safety controls functioning as designed.

Responded to water leak report at furnace location. Upon inspection, identified condensate drain line issue with PVC drainage system. Unit confirmed operational and producing cooling as expected. Documented existing drainage configuration and moisture conditions in utility area for customer records.

Completed full air conditioning system replacement at residential property. Removed existing HVAC equipment and installed new air handler unit in interior utility closet with proper ductwork connections, refrigerant line sets, and condensate drain piping. Verified all factory specifications, performed system startup, and confirmed proper operation of all components.

Conducted site assessment for standby generator installation. Evaluated existing electrical panel configuration and circuit breaker distribution to determine compatibility and capacity for generator integration. Inspected attic space to assess potential routing paths for electrical conduit and transfer switch installation. Documented current electrical infrastructure including panel layout, available breaker positions, and existing circuit directory. Reviewed structural conditions and clearance requirements for generator equipment placement and necessary electrical connections. Provided comprehensive estimate for standby generator system installation with pricing contingent upon final equipment specifications and installation requirements.

Completed full air conditioning system replacement at residential property. Removed existing outdoor condenser unit and installed new Carrier brand AC condenser on concrete pad against exterior wall with proper electrical connections via conduit mounted to siding. Unit positioned on decorative stone base for drainage and accessibility. Indoor components integrated with existing furnace and ductwork system in basement mechanical room, connecting to established humidifier and water heater infrastructure. All refrigerant lines, electrical connections, and condensate drainage properly installed and tested for optimal system performance.

Completed comprehensive furnace and air conditioning system installation at residential property. Installed new outdoor condensing unit on concrete pad with proper electrical conduit connection and positioned unit on decorative stone base for drainage and stability. Performed crawl space work including HVAC ductwork installation, integrated system with existing sump pump infrastructure, and ensured proper routing of PVC drainage lines and electrical connections throughout subfloor area. All work completed per approved scope, system tested and operational.

Conducted comprehensive estimate for HVAC system upgrade involving replacement of two existing air conditioning units and installation of two additional AC systems. Assessed current basement equipment including existing Bryant furnace and air handling systems mounted on concrete block foundations. Evaluated ductwork configuration, electrical requirements, and spatial considerations for expanded cooling capacity. Documented existing mechanical systems and infrastructure to determine scope of work for replacing current AC units and adding supplementary cooling zones. Photographed equipment layout, ductwork routing, and installation areas to support proposal development for complete system enhancement.

Completed annual cooling maintenance on 2017 EnergiAir unit with warranty through June 2027. Performed standard tune-up procedures including system diagnostics and electrical measurements using digital multimeter, with all readings within normal operating parameters.

Completed comprehensive AC tune-up service on a 14-year-old residential air conditioning system. Performed standard maintenance procedures including inspection of the outdoor condenser unit, verification of electrical connections at the disconnect box and junction box, and assessment of refrigerant lines and PVC condensate drainage system. Unit found to be in functional condition with normal outdoor weathering present on equipment and concrete pad. Documentation captured showing proper installation configuration with appropriate clearances and component accessibility for future service needs.

Responded to non-functional garbage disposal at kitchen sink in 20-year-old home. Upon arrival, inspected InSinkErator Pro SS disposal unit mounted beneath double-basin stainless steel sink. Tested unit for power and mechanical function, identified issue preventing operation. Reset disposal using bottom-mounted reset button and verified electrical connection at power outlet in cabinet. Cleared minor obstruction from disposal chamber and confirmed grinding mechanism operated freely. Tested unit under running water to verify full functionality restored. Disposal now operating normally with proper drainage in both sink basins.

Completed annual cooling maintenance on two Goodman air conditioning systems (20-year-old unit and 10-year-old unit). Performed comprehensive tune-up procedures on both systems including inspection of electrical connections, refrigerant levels, condenser coils, and mechanical components. All equipment operating within normal parameters upon completion of preventative maintenance service.

Conducted comprehensive assessment of existing Heil brand furnace and air conditioning system in residential basement mechanical room. Customer reported AC operational but furnace not functioning properly. Performed detailed inspection of furnace unit, including examination of manufacturer labels, ventilation systems, electrical connections, and PVC vent piping. Documented current equipment condition and configuration, noting all mechanical connections, ductwork, and utility interfaces. Provided estimate for furnace and AC replacement options based on system evaluation and customer needs.