Top-Rated HVAC & Plumbing Services in Spring Lake, MI

Completed full ACREP-AC system replacement including outdoor condensing unit and indoor air handler components. Removed existing equipment and installed new dark olive-green outdoor condenser unit on concrete pad with proper electrical connections to existing disconnect box and meter. Installed new furnace unit in basement utility area with integrated humidifier attachment and metallic supply ductwork. Verified all electrical connections, refrigerant lines, and condensate drainage systems functioning properly. Tested system operation and confirmed proper airflow, temperature differential, and thermostat communication. System commissioned and left in full operational status.

Completed estimate for adding air conditioning system to existing property. Assessed unfinished basement area with exposed framing, existing furnace/air handler unit with open access panel, and current ductwork infrastructure to determine feasibility and requirements for AC installation.

Responded to callback for recurring water leak on 8-year-old Goodman unit following previous day's condensate pump replacement under recall. Upon inspection, discovered severely clogged and deteriorated drain pan with extensive biological growth and standing water accumulation. Drain line was completely obstructed with heavy black mold and debris buildup, preventing proper condensate drainage. Removed and documented contaminated drain line material showing advanced decomposition. Thoroughly cleaned drain pan, removing all standing water, sediment, and microbial growth from interior surfaces. Cleared primary and secondary drain lines to restore proper water flow. Verified drain system functionality and confirmed no active leaks present at completion of service.

Responded to no cool call on 19-year-old Goodman unit with reduced cooling capacity. Upon inspection, found significant accumulation of leaves, twigs, and organic debris inside outdoor unit housing obstructing airflow around compressor. Removed all debris from unit, cleared ductwork area, and verified proper airflow restoration. Unit tested and confirmed returning to normal cooling operation after cleaning.

Completed new toilet installation in residential bathroom of 60-year-old home. Removed existing fixture and installed replacement unit, ensuring proper seating, secure floor flange connection, and verified all plumbing connections for leak-free operation. Inspected crawl space beneath bathroom to confirm drain line integrity and proper waste line pitch. Tested flush mechanism and water supply line for proper function upon completion.

Completed full HVAC system replacement including installation of new Carrier air conditioning condenser unit on exterior concrete pad with proper electrical disconnect, and new air handler unit in basement with associated ductwork and PVC condensate drainage system. All equipment installed per manufacturer specifications, electrical connections verified, refrigerant lines properly charged and tested for leaks, and condensate drain system tested for proper operation. System startup completed, airflow verified, and unit left in full operational condition.

Modified vanity cabinet to accommodate undermount lavatory sink installation. Cut access opening in cabinet base and reworked P-trap configuration to ensure proper drainage and clearance. Adjusted plumbing connections to align with new fixture placement while maintaining code-compliant trap seal and venting.

Completed annual ASTU-AC Super Tune-up on 15-year-old air conditioning system, performing comprehensive inspection and maintenance of all major components. Documented equipment condition with photos showing furnace assembly, gas piping connections, and associated mechanical components in basement installation location.

Provided estimate for relocating or installing new plumbing supply and drain lines for laundry appliances. Assessed existing LG front-loading washer and dryer configuration and evaluated dishwasher plumbing connections including water supply lines with shut-off valves and drainage system components to determine scope of work required for laundry room plumbing modifications.

Responded to service call for tankless water heater experiencing intermittent heating issues, including complete loss of hot water and mid-cycle temperature drops. Inspected unit installation, gas supply connections, venting system, and control panel diagnostics. Documented current equipment condition with photographs showing tankless unit mounted in basement utility area with proper copper water lines, PVC venting, pressure relief valve, and electrical connections in place.

Completed installation of prefabricated white shower unit with integrated shelving, chrome grab bar, and flexible shower head assembly, including proper drain connection and threshold sealing. Installed new two-piece toilet with tank and bowl configuration, ensuring proper wax ring seal and water supply connection. Work performed in bathroom undergoing renovation with coordination around ongoing wall finishing and construction activities.

Completed annual cooling maintenance on EnergiAir system. Performed comprehensive tune-up including inspection of all major components, verified refrigerant levels, checked electrical connections, and tested system operation. Inspected condensate drainage system and confirmed proper function of drain assembly with filter strainer. All components operating within normal parameters and system ready for cooling season.

Completed estimate for air conditioning installation at rental property with existing furnace system. Assessed unfinished basement utility area with exposed electrical panel, circuit capacity, and available space for AC equipment integration. Documented existing infrastructure including electrical service, ductwork routing options, and structural considerations for new cooling system installation while preserving current heating equipment per owner specifications.

Conducted water heater estimate in basement utility area. Inspected existing aged cylindrical water heater with multiple copper supply lines, brass fittings, and yellow-handled shutoff valve. Documented current installation including connection points, venting configuration with metallic ductwork, and surrounding plumbing infrastructure. Assessed mechanical room conditions and photographed equipment for replacement proposal.

Responded to no-cooling call on 21-year-old Bryant system where furnace fan was operating but outdoor unit showed no activity. Performed diagnostic evaluation of split system HVAC equipment located in basement utility area. Documented equipment condition and system configuration with photos showing furnace, air handler, and associated ductwork installation. Provided estimate for necessary repairs to restore outdoor unit operation and complete system functionality.

Completed comprehensive AC Super Tune-up service including full system inspection, cleaning of condenser coils, verification of refrigerant levels, and testing of all electrical connections. Accessed and inspected drain line assembly and internal components, documenting system condition with photos. All systems tested and verified operating within normal parameters upon completion.

Successfully completed add-on air conditioning installation to existing forced-air heating system. Installed new outdoor condenser unit on concrete pad with proper clearances from structure, mounted electrical disconnect box on exterior wall with appropriate conduit routing. Connected refrigerant lines and performed vacuum and charging procedures using manifold gauges to manufacturer specifications. Inside basement mechanical room, integrated new evaporator coil with existing Comfortmaker furnace system, installed condensate drainage piping using PVC with proper pitch and connections. Verified all electrical connections at both indoor and outdoor units, tested system startup and operation. Confirmed proper airflow, refrigerant pressures, and temperature split across evaporator coil. System operating efficiently with all safety controls functioning as designed.

Responded to reported water leak concern at property with 8-year-old AC unit and 9-year-old furnace (EnergiAir systems with warranties through 2027-2028). Upon inspection, examined HVAC system components including air filter and blower assembly, which showed normal dust accumulation consistent with system age. Inspected utility room area including water heater, PVC drainage lines, and concrete floor surfaces. Documented visible water staining and moisture patterns on floor near mechanical equipment. Verified heating system remained operational during inspection. Photographed filter condition, blower housing, water heater installation, and floor areas showing staining to document current system condition and identify potential leak source for further evaluation.

Responded to callback for recurring water leak from HVAC system affecting interior living space. Upon arrival, found significant water damage to baseboard and flooring in corner area with visible staining and moisture deterioration from continued leak. Documented extensive damage with photos showing compromised baseboards with dark water staining and mold growth, along with affected carpeted and tile flooring areas near return air grille. Issue persists following previous day's service visit. Unit is 8-year-old Goodman system requiring further diagnostic evaluation to identify and resolve source of ongoing water intrusion.

Completed comprehensive ASTU-AC Super Tune-up service on residential air conditioning system. Upon inspection, discovered severely damaged burner assembly with extensive cracking, warping, and deterioration of the white plastic housing, along with discolored mesh grating indicating combustion issues. Documented failed component with detailed photographs showing the extent of damage to the cylindrical burner assembly and internal structures. System appears to be approximately 5 years old based on service history notation, though specific manufacturer information requires verification.