HVAC & Plumbing Services in Wyoming, MI

Diagnosed furnace with insufficient heat output; inspection revealed significant rust and corrosion on heat exchanger indicating potential cracked heat exchanger. Recommended replacement of unit due to safety concerns as carbon monoxide could leak into living space when operational.

Successfully installed new furnace in basement utility area with proper PVC intake/exhaust venting connected to existing ductwork system. Unit was properly positioned with all connections secured and tested for optimal operation. Installation completed with all safety protocols followed and system functioning as designed.

Repaired outdoor faucet leak by replacing deteriorated valve stem assembly and inspecting connected PVC supply lines in basement for secondary damage. Verified proper function after repair with no water hammer or residual leakage, and confirmed no frost damage to interior piping components.

Completed installation of mini-split ductless system in two rooms of residence (main living area with green walls and child's Batman-themed bedroom). Units were properly wall-mounted and secured with all electrical connections verified for proper operation.

Performed furnace and humidifier tune-up as part of annual heating service. Inspected condensate drain system and noted proper drainage with some moisture present. Replaced air filter with new MicroPower Guard filter as requested by customer.

Completed electrical installation for kitchen remodel project, installing four new circuits and four recessed disc lights. Work involved running electrical conduit through existing concrete block walls with wood framing, mounting junction boxes at standard heights, and connecting all necessary wiring for the renovation.

Responded to NH service call for 9-year-old EnergiAir furnace with insufficient heating. Inspected control panel functionality and replaced dirty air filter (16x25x1) to restore proper airflow. System now operating within normal parameters.

Performed annual heating maintenance on EnergiAir WT 08-2034 furnace (2011 model). Completed standard tune-up procedures and inspected ductwork in basement, noting minor dent in main supply trunk. System functioning properly with no humidifier present.

Performed annual maintenance tune-up on EnergiAir WT 04-2035 furnace with attached humidifier. Inspected interior components including access panels, dampers, and wiring connections. System is functioning properly with no issues identified; unit is in good working condition for continued operation.

Successfully installed new American Standard HVAC system including indoor air handler unit with complete ductwork integration and PVC condensate drainage. Outdoor condenser unit was properly placed on concrete pad with electrical connections established according to manufacturer specifications.

Performed annual heating maintenance on Everest furnace system with humidifier. Completed comprehensive tune-up per ENE warranty requirements. System is functioning properly with all components in good working condition; installation appears relatively new with proper ventilation and drainage connections intact. Applied service verification sticker upon completion.

Performed annual tune-up on Ultram furnace (approx. 40 years old). Inspected PVC venting system and mounting brackets, which appear in good condition despite age. No humidifier present. Verified proper electrical connections and took documentation photos of the installation. System is operational with maintenance scheduled for 2025.

Completed annual heating service and humidifier maintenance as scheduled. Inspected system components including plumbing connections and drainage pipes, with particular attention to PVC ventilation system. All connections appear secure with proper sealing at joints; system is functioning within normal parameters.

Responded to service call for Energy-branded furnace running continuously and overheating the home beyond set temperature. Diagnosed issue with malfunctioning thermostat causing continuous operation. Replaced thermostat, calibrated system settings, and verified proper cycling operation. Unit now functioning within normal temperature parameters.

Completed repair service on a dripping DCM Kitchen faucet. Diagnosed issue with worn cartridge causing persistent drip. Replaced cartridge, reassembled faucet components, and verified proper operation with no leaks during pressure test. Customer confirmed satisfaction with repair.

Successfully completed installation of a mini-split system, including mounting the condensate pump on the concrete block wall with proper electrical connection and PVC line penetration. System was fully installed with insulated refrigerant lines and electrical conduit properly routed through the mechanical space, with all components tested and verified operational.

Completed annual heating service on furnace with integrated humidifier. Inspected drainage system including condensate pump and PVC piping for proper operation. Noted minor dust accumulation and cobwebs around unit but confirmed all components are functioning correctly with no immediate concerns.

Successfully installed new furnace in basement utility area. Unit was properly connected to existing ductwork with PVC ventilation pipes secured along ceiling. System was tested and verified operational with all warning labels properly affixed.

Responded to a service call for insufficient hot water supply from a 5-year-old Rheem water heater. Upon inspection, found temperature setting was too low; adjusted the thermostat to appropriate level after informing customer about scalding risks. Verified proper operation and confirmed system now producing adequate hot water volume.

Completed QUOTR repair by raising laundry box to proper height for customer's washing machine connections. Installed new hammer arrestors on both hot and cold water supply lines and ensured proper connection of flexible supply lines and drainage hose. Total service time: 2.5 hours.