Reputable HVAC, Plumbing & Generator Services in Zeeland, MI

Responded to service call for 9-year-old tankless water heater experiencing intermittent beeping during high-demand usage (laundry, bathtub filling). Performed diagnostic evaluation and descaling flush service to address mineral buildup affecting flow sensor operation. Unit restored to normal operation across all fixtures.

Completed annual cooling maintenance on Carrier system per club membership agreement. Performed comprehensive tune-up including inspection of air handler compartment, verified filter condition, and documented equipment status with photos. All components operating within normal parameters at time of service.

Responded to service call for toilet that would not flush. Upon inspection, found the flush lever chain had become disconnected from the flapper valve inside the tank. Reconnected the chain to the flush lever arm and flapper mechanism, adjusted chain length for proper operation, and tested flush function multiple times to ensure reliable performance. Toilet now operates normally with full flush capability restored.

Responded to no heat call and performed diagnostic inspection of HVAC system. Upon examination of the unit interior, identified and addressed electrical component concerns. Verified proper wire connections across multiple circuits including control wiring and power supply lines, inspected heating elements and associated mechanical components for proper operation, and confirmed system functionality before completing service.

Completed installation of Energy Star certified tankless water heater in basement utility area, mounted on plywood backing board secured to wall studs. Established all necessary plumbing connections including copper supply lines, installed expansion tank, drain pan with condensate pump, and verified proper venting through existing infrastructure. System tested and operational with digital controls functioning correctly.

Completed full HVAC system installation including new furnace unit and outdoor air conditioning condenser. Installed Aprilaire whole-house humidifier with digital control panel, connected all ductwork and PVC condensate piping, and mounted exterior condenser unit on concrete pad with proper electrical connections. System tested and verified operational with all components functioning per manufacturer specifications.

Completed annual cooling maintenance on 2014 EnergiAir system with 10-year service history. Performed comprehensive tune-up including inspection of condensate pump assembly, drainage lines, and electrical connections; documented equipment condition with photos showing proper installation of safety flooring and condensate management components. All systems operational and functioning within manufacturer specifications.

Responded to service call for reported boiler leak on 1-year-old Utica WT 2-2030 unit. Upon inspection, located leak source at corroded pipe connection in crawl space area adjacent to boiler installation. Identified moisture damage and discoloration on surrounding wooden framing members and compromised fiberglass insulation from water exposure. Assessed threaded pipe connections and galvanized steel piping showing surface corrosion and deterioration. Documented conditions with photographs showing affected plumbing infrastructure, spray foam insulation areas, and copper piping with visible oxidation. Addressed leak at connection point and verified system integrity upon completion.

Completed annual cooling system tune-up and preventative maintenance inspection. System evaluated and found to be operating within normal parameters with no immediate service needs identified at this time.

Responded to no heat call for 2008 Goodman furnace. Upon inspection, found condensate drain system experiencing drainage issues as evidenced by exterior wall staining below exhaust vent termination. Documented PVC vent pipe configuration and condensate discharge points. System evaluated for proper venting and drainage functionality to restore heating operation.

Completed annual cooling maintenance on 7-year-old EnergiAir unit with warranty coverage through October 2028. Verified thermostat operation and documented system settings showing unit in heating mode with room temperature at 62°F and setpoint at 73°F, confirming proper display and control functionality for seasonal transition.

Completed annual cooling maintenance on 9-year-old EnergiAir condensing unit manufactured in 2019. Performed standard tune-up procedures including inspection of drain pan assembly, which showed discoloration and staining indicating previous moisture accumulation; verified drain system functionality and cleaned components as needed. All rubber grommets and mounting hardware inspected and confirmed secure.

Completed comprehensive electrical estimate for residential property requiring EV charger installation, new lighting fixtures with switch and electrical run, and main service panel upgrade to accommodate increased amperage demand. Site assessment documented existing Generac PWRcell energy storage system, current electrical service panels, meter configuration, and exterior conduit routing to determine optimal integration points for proposed upgrades and ensure compatibility with existing power management infrastructure.

Provided estimate for replacement of existing 20-25 year old Bradford White natural gas tank water heater with new tankless system. Assessed current installation including copper supply lines, blue-handled shutoff valve, and venting configuration in basement utility area. Evaluated electrical requirements for tankless conversion, noting absence of existing electrical infrastructure at installation location and current breaker panel capacity limitations. Documented existing panel with multiple circuits serving furnace, microwave, and lighting loads in unfinished utility space with exposed stud framing. Discussed future electrical upgrade needs including panel amperage increase to accommodate tankless water heater demand, potential EV charger installation, and additional lighting projects. Scheduled follow-up appointment to address electrical scope assessment and provide comprehensive estimate for complete system conversion and electrical infrastructure improvements.

Responded to emergency plumbing leak caused by burst pipe in residential basement. Upon arrival, assessed damage to exposed plumbing lines running along ceiling joists in utility area. Repaired compromised section of water supply line, secured all piping with proper mounting brackets, and verified system integrity through pressure testing. Documented existing conditions including OSB ceiling sheathing, exposed floor joists, and concrete foundation walls showing minor water staining from the incident.

# Job Description Responded to a sump pump and water backup emergency under a QUOTR-quoted repair authorization. Upon arrival, assessed the existing plumbing system and identified failures in the backup prevention infrastructure that were allowing water intrusion during heavy flow conditions. Installed a comprehensive water backup prevention system consisting of dual check valve assemblies with brass fittings and shut-off valves on the main water supply line. Mounted a white filtration housing unit to the concrete wall using secure black brackets, integrating it with the existing copper supply piping. Connected all components using appropriate brass compression fittings and copper pipe extensions to ensure proper water flow and system isolation capability. On the drainage side, configured a white PVC pipe assembly in a vertical loop configuration to manage sump discharge and prevent backflow. Integrated two electronic water backup prevention devices with American-flag-branded housin

Conducted an assessment of an aging water heater system scheduled for replacement by 2026. Inspection revealed a professionally installed unit with proper copper supply line connections and appropriate metal ductwork ventilation system mounted against a brick wall in a utility area. Documented the existing installation with detailed photos to support future replacement planning.

Diagnosed water heater failure and determined pressure relief valve was leaking and ignition system was non-functional. Inspected 9-year-old Goodman unit and surrounding plumbing components including the expansion tank. Documented condition of system with photos showing complete installation configuration for assessment of repair versus replacement options.

Successfully completed installation of new residential HVAC system in basement utility room, including furnace unit with metallic housing and air handler. System was properly connected to existing ductwork with all manufacturer specifications verified for optimal performance.

Completed annual heating maintenance on a 14-year-old Energi furnace. Inspected and cleaned the blower wheel assembly which showed minor dust accumulation. Examined heat exchanger port for proper operation with no signs of cracks or significant corrosion detected.