Heating, Cooling, Plumbing, and Electrical Services in Ada

Completed annual cooling maintenance on 14-year-old York air conditioning system. Performed comprehensive tune-up including inspection of exterior condenser unit fan assembly, verified proper airflow through protective grille, and examined outdoor unit condition. All components found operating within normal parameters with routine exterior dust accumulation noted on condenser housing and grille consistent with outdoor exposure.

Completed annual cooling maintenance on 2011 HVAC system. Inspected air handler unit, verified pleated filter condition, checked electrical connections and components, and documented equipment operation with photos. System operational and ready for cooling season.

Completed comprehensive water conditioning system replacement in basement utility area. Removed and disposed of existing water treatment equipment, then installed Sterling PS1X-75 water softener and iron reduction system, 4x20 carbon filter, and Sterling SWSI-45 HE water softener with complete PEX piping connections and mounting. Additionally replaced recirculating pump on water heating system in well room to restore proper hot water circulation throughout the property.

Completed full air conditioning system replacement. Removed existing outdoor condensing unit and installed new HVAC condenser on concrete pad against exterior wall. Ran refrigerant lines from new unit through exterior penetration into home, securing copper lines and insulated tubing to siding. Connected service valves and brass fittings to refrigerant lines at condensing unit. Verified all connections, sealed wall penetrations, and completed system startup with proper refrigerant charge levels documented on service labels.

Completed full HVAC system installation including new furnace and air conditioning unit. Interior furnace installed in mechanical room with proper PVC venting configuration routed through multiple joints to exterior, all manufacturer labels and warning plates intact and visible. Exterior condensing unit positioned against house with refrigerant lines and electrical conduit properly secured to vinyl siding, unit grounded and leveled on prepared pad near property fence line with drainage provisions in place.

Completed full air conditioning system replacement including outdoor condensing unit and indoor air handler. Installed new Lennox equipment in basement mechanical room alongside existing water heater and furnace. Charged system with proper refrigerant levels per manufacturer specifications, documenting factory charge of 15.5 oz, field charge of 6 oz, for total system charge of 12 lbs. Verified all refrigerant connections, brass fittings, and line sets properly secured and insulated. System tested and operational upon completion.

Responded to callback for outdoor unit cleaning concerns following previous maintenance visit. Performed thorough re-cleaning of condenser unit exterior panels, removing accumulated dirt and debris from beige cabinet surfaces. Carefully straightened bent condenser fins using fin comb tool to restore proper airflow and unit efficiency. Verified all sides of unit were properly cleaned, gravel bed maintained, and unit left in satisfactory condition per customer expectations.

Completed estimate for water heater replacement on 32-year-old unit installed in utility closet. Documented existing TTW-1 model water heater with standard copper piping connections and assessed plumbing infrastructure including exposed basement piping systems. Customer also requested thermostat evaluation for potential service if time permitted.

Completed comprehensive load calculation for residential HVAC system replacement estimate. Performed detailed heating and cooling load analysis accounting for ceiling, wall, floor, door, and glass components across multiple levels including basement, determining total heating load of 80,840 BTU and cooling load of 30,230 BTU to properly size new furnace and air conditioning equipment for optimal comfort and efficiency.

Completed annual cooling system maintenance and inspection under EnergiAir warranty coverage. Performed comprehensive tune-up including filter inspection, component cleaning, and system performance verification. Unit operating within normal parameters with no immediate concerns identified at time of service.

Completed annual cooling maintenance on 8-year-old EcoAir system (2021 model). Inspected air handling unit and ductwork, noting significant condensation present on metal surfaces indicating proper cooling operation and high humidity conditions. Replaced heavily soiled air filter with new unit to restore proper airflow and system efficiency.

Replaced recirculation pump and installed new check valve with isolation shut-off valve to improve system reliability. Removed 5 feet of CPVC piping and replaced with copper piping for enhanced durability. Provided estimate for future installation of Thermador ICM2150 coffee machine water line connection.

# Cooling System Diagnostic and Repair Responded to service call for air conditioning system blowing warm air and failing to maintain set temperature. Upon arrival, performed comprehensive system diagnostic to identify root cause of cooling failure. Accessed indoor air handler unit and inspected electrical components, including capacitor, contactor, and associated wiring connections. Found significant dust and debris accumulation throughout the unit interior, which can impede proper system operation and heat transfer. Noted visible corrosion and oxidation on metal housing and mounting hardware, indicating age and environmental exposure of the equipment. Conducted electrical testing of capacitor using multimeter to verify proper microfarad ratings and ensure component functionality. Inspected all wire connections at capacitor terminals and contactor for signs of looseness, overheating, or deterioration. Verified integrity of multi-colored control and power wiring throughout the syste

Completed annual cooling maintenance on 12-year-old Carrier air conditioning system. Performed comprehensive tune-up including inspection of outdoor condensing unit, verified proper leveling of equipment using precision tools, and documented unit condition with photos. All components operating within normal parameters at time of service.

Completed annual cooling maintenance on 15-year-old ENERGI system with 2023 condenser motor. Performed comprehensive tune-up including inspection of evaporator coil assembly, verified refrigerant line connections, and documented equipment condition with photographic evidence. System operational with normal dust accumulation noted on coil surfaces consistent with age and regular use.

Responded to water leak from pressure relief valve on water heater. Upon arrival, confirmed active discharge from temperature and pressure relief valve on Bradford White replacement unit installed in 2020 with warranty expiration October 2033. Inspected water heater installation, associated copper piping connections, and surrounding plumbing system including pressure tank and dual water filtration housings. Documented existing conditions with photographs showing utility area setup, wall staining from previous moisture exposure, and complete mechanical room configuration. Assessed PRV operation and system pressure to determine cause of discharge and recommended appropriate corrective action to resolve leak condition.

Completed annual cooling maintenance on 5-year-old Carrier HVAC system. Performed comprehensive inspection of air handler unit, verified proper operation of cooling components, checked refrigerant levels, and inspected ductwork connections including horizontal metallic flex duct with reflective insulation. Evaluated Honeywell air purification unit mounted adjacent to system, confirmed electrical connections secure, and documented equipment condition with photos. All components operating within normal parameters.

Responded to no cool call with outdoor unit fan not operating. Upon inspection, found failed run capacitor preventing condenser fan motor from starting. Replaced defective capacitor with proper replacement rated to manufacturer specifications, verified all electrical connections secure, and tested system operation with successful fan motor startup and normal cooling cycle restored.

Completed annual cooling maintenance on two air conditioning systems: a 12-year-old ICP unit and a 1-year-old unit under warranty. Performed comprehensive tune-ups on both systems including filter inspection, electrical connection testing, refrigerant level verification, and condensate drain line evaluation. Observed standing water in condensate drain pan and confirmed proper drainage function. Inspected evaporator coil assembly, verified thermostat operation, and tested all safety controls. Both systems operating within manufacturer specifications upon completion of maintenance procedures.

Responded to no cooling call on 2020 HVAC system. Upon arrival, confirmed entire system was not operational. Inspected outdoor unit electrical components and found heavy dirt accumulation, debris buildup, and corrosion throughout the control panel enclosure. Contactor and relay connections showed signs of environmental exposure with visible staining and weathering on interior surfaces. Documented equipment condition with photographs showing deteriorated electrical panel with rust spots, discolored surfaces, and compromised wiring connections. System required cleaning and electrical component evaluation to restore proper operation.