Top-Notch HVAC, Plumbing & Generator Services in Battle Creek, MI

Successfully completed full HVAC system replacement including new Carrier furnace and outdoor condensing unit. Installed furnace in basement mechanical room with complete ductwork assembly, including metallic supply plenum and curved elbow transitions. Mounted new white cylindrical AC condenser on existing concrete pad against exterior wall with proper refrigerant line routing through wall penetration and secure electrical connections via exterior junction box. All components tested and operational upon completion.

Completed scheduled 10-year maintenance tune-up on Kohler generator unit. Performed comprehensive inspection of all major components, including engine, electrical systems, and control panels. Serviced air filter assembly, checked oil levels, inspected battery connections, and verified proper operation of all safety systems. All components found to be functioning within normal parameters. Unit tested and left in full operational condition.

Responded to customer request for electrical panel evaluation due to fire hazard concerns. Conducted thorough inspection of aging residential circuit breaker panel mounted in wooden wall frame. Panel exhibited signs of wear consistent with older electrical installation, including surface discoloration and dust accumulation on beige metal enclosure. Assessed wiring configuration including multiple copper cables, white insulated wires, and colored conductors entering from top and bottom of panel. Examined circuit breaker arrangement in two vertical columns with older style black and tan switches. Documented condition of main disconnect components, wire connections with twist-on connectors, and flexible metal conduit. Photographed panel installation and surrounding wooden framing for estimate preparation. Provided assessment findings and recommendations for necessary repairs or panel replacement to address potential safety concerns.

Responded to no hot water condition affecting entire residence. Upon inspection, found 11-year-old AO Smith water heater in basement utility area with significant dust accumulation and age-related wear. Unit located in unfinished basement space with proper venting through existing flue system connected to horizontal ductwork. Documented existing installation showing cylindrical tank-style heater with metallic flue pipe, red-handled valve connection, and manufacturer specification plate. Assessed basement infrastructure including concrete block walls, exposed floor joists, and concrete flooring suitable for replacement installation. Provided estimate for water heater replacement due to unit failure and age exceeding typical service life expectancy.

Completed full HVAC system installation including Lennox furnace unit in basement utility area and outdoor condensing unit. Connected all PVC venting, refrigerant lines, ductwork, and electrical components per manufacturer specifications. Properly charged system with refrigerant, documented field charge levels, verified all safety labels and warnings in place, and confirmed operational performance of complete heating and cooling system.

Responded to a drain problem in a 30-40 year old residential property where pipe replacement was required. Upon inspection, accessed the affected area through exposed floor joists and subflooring, revealing deteriorated wooden structural members with visible water damage, staining, and discoloration consistent with prolonged moisture exposure from the failing drain line. Documented extensive damage to ceiling framing and support beams, including evidence of previous water infiltration that had compromised the structural integrity of multiple joists. Photographed the existing conditions showing damaged lumber, metal joist hangers, and the routing of existing plumbing and electrical systems through the floor structure to provide comprehensive documentation for the necessary pipe replacement and potential structural repairs.

Completed annual cooling maintenance on 13-year-old York AC system and performed hot water heater tune-up. Inspected condensate pump assembly in crawl space, verified proper operation and electrical connections, checked all mechanical components for wear and functionality. All systems tested and operating within normal parameters.

Completed annual cooling maintenance on 16-year-old Payne air conditioning system. Performed comprehensive tune-up including inspection of condensate pump assembly, verified proper drainage operation, and documented equipment condition with photos. All components operating within normal parameters at time of service.

# NC-No Cool Service Completed Responded to no cooling call with furnace fan operating but outdoor unit buzzing without compressor engagement. Upon inspection, found outdoor condenser unit experiencing electrical failure preventing compressor startup. Accessed outdoor unit and identified failed dual-run capacitor showing visible signs of deterioration, corrosion, and age-related failure. Capacitor tested out of specification and unable to provide necessary starting voltage to compressor motor, resulting in characteristic buzzing sound without rotation. Removed defective capacitor and installed new dual-run capacitor with proper microfarad ratings for both compressor and condenser fan motor. Secured all electrical connections, verified proper wire routing, and ensured terminals were tight. Energized system and confirmed compressor started smoothly without buzzing. Verified condenser fan motor operation and proper amperage draw on both compressor and fan motor. Monitored system through

Responded to complaint of loud noise from AC unit that began after thermostat replacement. Upon inspection, identified faulty contactor causing excessive noise during operation. Replaced defective contactor with new unit, verified all electrical connections, and tested system operation to confirm noise was eliminated and unit returned to normal heating function.

Responded to call regarding strong septic odor in residence. Conducted thorough inspection of utility area and basement plumbing infrastructure. Examined washing machine drain connections, PVC drainage system, and water treatment equipment for potential sources of sewer gas infiltration. Inspected overhead plumbing including drain lines and vent pipes for proper configuration and potential trap seal failures. Photographed existing conditions including utility room plumbing configuration and basement ceiling infrastructure showing drain and vent pipe routing. No immediate plumbing failures or leaks identified during visual inspection. Advised client on potential causes of septic odors including dry trap seals, compromised vent stack, or issues with septic system itself requiring further specialized evaluation.

Responded to service call for air conditioning system experiencing intermittent operation and complete failure during hot weather conditions. Upon arrival, found system had been manually restarted by customer and was currently running. Performed comprehensive diagnostic inspection of indoor air handler and outdoor condensing unit. Inspected blower motor assembly, gas valve connections, electrical wiring, and capacitor for signs of failure or degradation. Found significant accumulation of dirt, dust, and debris on outdoor unit components and electrical connections, indicating lack of recent maintenance. Documented existing conditions with photographs showing interior cabinet components, wiring connections, and outdoor unit electrical assembly with visible contamination. System components showed normal operational wear with environmental exposure evident throughout. Evaluated blower motor operation, capacitor condition, and electrical connections for proper function and safety concerns.

Completed annual cooling maintenance on a 9-year-old Goodman air conditioning system with Heil furnace under consumer's protection plan. Performed comprehensive inspection of outdoor condenser unit and indoor air handler, verified refrigerant lines and electrical connections, cleaned condenser coils, checked fan operation, and inspected all ductwork connections. System operating within normal parameters with no immediate repairs required; documented equipment condition with photos for service records.

Completed full HVAC system installation including Carrier brand furnace and air conditioning condenser unit. Installed furnace in basement mechanical room with new metallic supply and return ductwork routed through ceiling joists. Positioned outdoor AC condenser unit on concrete pad adjacent to exterior wall with proper clearances, connected refrigerant lines, and installed electrical disconnect box. Established all necessary electrical connections, tested system operation, and verified proper airflow throughout ductwork. System commissioned and left in full operational condition.

Responded to a no-cooling complaint on a residential air conditioning system installed in 2018. Upon arrival, discovered the outdoor condenser unit had severe exterior casing deterioration with extensive rust and corrosion that had compromised the structural integrity of the metal panels. Large sections of the housing showed advanced oxidation with material failure at multiple points. Measured supply air temperature at 83.3°F, confirming complete loss of cooling capacity. Documented the extensive corrosion damage to the condenser cabinet and the elevated return air temperature. The unit's deteriorated condition indicates the exterior damage has likely allowed moisture intrusion and environmental exposure that has affected internal components. System requires condenser unit replacement due to the extent of cabinet failure and inability to maintain proper cooling operation.

Completed no-charge installation of cellular communication kit on Kohler standby generator unit. Installed cellular module hardware, connected to generator control panel, and verified proper system communication and functionality. Unit tested successfully with cellular connectivity confirmed operational for remote monitoring capabilities.

Responded to service call for HVAC system producing buzzing noise and causing electrical interference with household lights. Upon inspection, found 36-year-old Lennox unit with inadequate cooling performance and persistent buzzing that remained unresolved following recent electrical work. Documented existing furnace installation and ductwork configuration in basement utility area. Photographed equipment setup including flexible metallic ductwork, PVC venting system, and gas line connections to assess overall system condition and identify potential electrical or mechanical failure points causing the reported symptoms.

Completed well system replacement including new well tank, tank tee, and 40/60 psig pressure switch with all necessary accessories. Installed shut-off valve on gas line and performed complete water heater flush to remove sediment buildup. All components tested and verified operational with proper pressure settings.

Completed installation of new laundry sink with chrome faucet and replaced three frost-free exterior spigots. The utility sink was mounted on metal legs with proper supply line connections using braided stainless steel hoses and chrome shut-off valves, along with PVC drain piping installed to code.

Completed annual cooling maintenance on 16-year-old Goodman air conditioning system with condenser manufactured in 2023. Performed comprehensive tune-up including system inspection, refrigerant level check, electrical connection testing, and component cleaning to ensure optimal performance for the cooling season. All equipment operating within normal parameters upon completion.