Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Completed annual heating maintenance inspection and tune-up on residential furnace system. Performed comprehensive diagnostic evaluation of all heating components, documented equipment age and manufacturer information, and captured photographic evidence of system condition including condensate pump installation and mechanical room layout. Generated detailed diagnostic report with findings for submission to home warranty company as requested.

Completed plumbing project estimate for kitchen remodel requiring new plumbing installation for sink, faucet, and garbage disposal. Customer was advised that electrical work for garbage disposal connection would require separate electrical service scheduling.

Responded to service call for 11-year-old Trane air conditioning system with previously diagnosed high amp draw and potential failing starter component. Performed diagnostic evaluation of compressor electrical performance and starter capacitor function. Unit was confirmed operational and cooling effectively at time of inspection. Documented system condition with photos of HVAC installation including cabinet housing, electrical connections, and associated mechanical components in utility area. Customer advised of equipment age and potential for future component failure requiring monitoring of electrical performance during subsequent cooling seasons.

Responded to complaint of knocking noise in plumbing pipes throughout house when using hot or cold water, occurring after recent technician visit. Upon arrival, performed diagnostic assessment of plumbing system in 1997-built home, focusing on left side of structure where noise was primarily reported. Tested static water pressure at hose bib using calibrated pressure gauge to determine if excessive pressure was causing water hammer condition. Inspected Bradford White water heater installation, copper supply lines, and associated plumbing connections in mechanical room for loose pipes, inadequate securing, or missing water hammer arrestors. Verified proper pipe support and checked for thermal expansion issues that could contribute to knocking sounds. Documented system pressure readings and condition of plumbing infrastructure with photographic evidence. Provided findings and recommendations to address the water hammer condition in the residential plumbing system.

Completed pre-season air conditioning tune-up and inspection on 16-year-old residential system located in basement mechanical room. Performed comprehensive maintenance including cleaning of condenser coils, evaporator coils, and blower components, verified refrigerant levels and pressures, tested electrical connections and capacitors, inspected condensate drain line functionality, and confirmed proper airflow through ductwork. System was found to be operating within manufacturer specifications and is ready for the upcoming cooling season.

Completed installation of add-on air conditioning system at residential property. Installed outdoor condensing unit on concrete pad against foundation with proper clearances, ran refrigerant lines and electrical conduit along exterior wall to new disconnect box, and established all necessary connections per manufacturer specifications. System tested and verified operational with proper airflow and electrical parameters confirmed.

Completed annual cooling maintenance on residential air conditioning system. Performed comprehensive tune-up including inspection of condensate drain lines, verified proper drainage function, and checked all accessible mechanical components within the air handler cabinet. System operating within normal parameters; unit has 10-year equipment warranty extending through May 2026.

Completed comprehensive furnace super tune-up on 20+ year old unit per sales team request. Performed full system inspection including internal heat exchanger examination using borescope camera to assess condition and identify potential cracks or deterioration. All components found to be in acceptable operating condition with no immediate safety concerns identified.

Responded to a no-cooling call on a 9-year-old Rheem system that was cycling off after 10-15 minutes of operation and requiring manual resets to restart. Upon inspection, diagnosed a failed dual-run capacitor causing the compressor to short-cycle and shut down on thermal overload. Replaced the defective capacitor with proper OEM-spec replacement, verified all electrical connections, and tested system operation through multiple complete cycles. Unit now running continuously with proper amp draw and cooling performance restored. System returned to full operational status.

Completed comprehensive pre-season AC Super Tune-up on 16-year-old system for new homeowner. Performed full system inspection, cleaned condenser and evaporator coils, checked refrigerant levels and pressures, tested electrical components and capacitors, verified thermostat operation, and ensured proper airflow throughout. System is now operating efficiently and ready for the upcoming cooling season.

Completed full HVAC system installation including outdoor condensing unit and indoor air handler with York furnace integration. Installed refrigerant lines with proper insulation, electrical connections via flexible metal conduit, and PVC vent piping for exhaust and intake. System charged with refrigerant to manufacturer specifications, tested all controls and thermostats, verified proper airflow through ductwork connections, and confirmed operational parameters within acceptable range.

Completed annual cooling maintenance and tune-up on an 8-year-old ICP system with a 2016 condenser model. Inspected HVAC equipment in basement utility area, including ductwork, refrigerant lines, and furnace connections. All mechanical systems were evaluated, PVC condensate drainage verified, and unit found operating within normal parameters.

Completed comprehensive AC Super Tune-up on 5-year-old system, including full system inspection of attic-mounted air handler and associated ductwork. Verified proper operation of blower assembly, checked electrical connections, inspected condensate drain line with PVC piping, and cleaned system components to ensure optimal performance for the cooling season.

Responded to no cooling call on 8-year-old Trane unit that was intermittently shutting down with reported electrical discharge. Upon inspection, identified compromised electrical connections at outdoor disconnect, performed necessary repairs to eliminate arcing condition, and verified proper system operation with safe electrical readings throughout.

Responded to service call for malfunctioning 13-year-old Emerson digital thermostat. Upon inspection, confirmed thermostat failure while HVAC system retained heating and cooling capabilities. Documented existing wiring configuration at terminal block showing proper connections at RC, RH, O/B, Y, G, and W/C terminals with red, yellow, green, and blue wires. Removed failed Emerson thermostat from wall mount and photographed unit and wiring for service records. System operational with heating and cooling functions intact despite thermostat display issues.

Conducted free estimate for residential air conditioning system replacement. Existing outdoor condenser unit is 22 years old, barrel-style configuration with cylindrical design and mesh cage protection, located on concrete pad in side yard landscaping area. Indoor equipment includes Tempstar furnace with Aprilaire humidifier in basement utility room. Documented current system configuration with photos for replacement proposal and equipment sizing recommendations.

Completed installation of residential water softening system in basement utility area. Installed two large-capacity water treatment tanks with control valves and pressure gauges, connected via copper piping to existing plumbing infrastructure. Integrated new softener system with existing water heater and treatment equipment using appropriate PVC and copper connections, ensuring proper flow direction and valve placement for future maintenance access.

Completed comprehensive Super Tune-up service on 15-year-old air conditioning system. Performed full system inspection, cleaned condenser coils, checked refrigerant levels, tested electrical connections, verified proper operation of condensate pump (Model WP-8) located in basement utility area, and confirmed all components operating within manufacturer specifications. System running efficiently with no issues identified.

Completed annual cooling maintenance on 9-year-old EnergiAir system. Inspected condensate drain pan and drainage assembly, noting minor debris accumulation around drain connection and hose clamp area. Verified proper drainage function and documented system condition with photos for customer records due to visual impairment considerations.

Responded to service call for 16-year-old outdoor AC unit with visible impact damage from falling icicle. Upon arrival, confirmed unit powers on but outdoor condenser fan motor not operating. Performed visual inspection of condenser unit and identified dent in housing and potential damage to fan assembly. Diagnosed non-spinning fan as result of winter storm impact affecting fan blade, motor, or run capacitor. Documented damage with photos showing dented protective grille, fan housing, and overall unit condition for repair estimate and parts ordering.