Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Conducted site assessment for complete AC system replacement at residential property. Evaluated existing outdoor condenser unit and indoor furnace system, documented current equipment configuration including electrical connections, ductwork layout, and water heater proximity for replacement planning. Provided comprehensive estimate for new HVAC system installation based on existing infrastructure and customer requirements.

Responded to multiple plumbing concerns in residential bathroom. Addressed broken sink stopper mechanism in bathroom lavatory. Investigated and diagnosed unusual noise occurring during shower operation that persisted for approximately 20 seconds after turning on water supply. Inspected toilet tank components and identified slow fill issue caused by fill valve requiring adjustment. Examined fill valve assembly, float mechanism, and water supply line connections. Made necessary adjustments to optimize toilet tank fill rate and restore proper operation. Verified all fixtures functioning correctly upon completion. Documented conditions with photographic evidence showing toilet tank internal components and shower/tub fixture assembly.

Completed sales estimate for replacement of 15-year-old residential air conditioning system. Evaluated existing outdoor condenser unit installed on concrete pad in side yard area and inspected indoor air handler/furnace unit located in basement mechanical room. Documented current equipment condition, discussed replacement options with customer, and provided comprehensive estimate for new AC system installation.

Completed installation of walk-in shower system including white subway tile walls in brick-lay pattern, molded shower pan with center drain, chrome shower head assembly, and horizontal chrome grab bar for safety. All plumbing fixtures installed and operational, with proper water supply connections and drainage completed per code requirements.

Completed annual heating maintenance on furnace system. Performed comprehensive tune-up including inspection of all mechanical components, burner assembly, heat exchanger, and blower motor. Verified proper operation of ignition system and flame sensor. Checked and documented system pressures and temperatures. Inspected internal cabinet components and mounting hardware. System operating within manufacturer specifications with no humidifier present on unit. All safety controls tested and confirmed functional.

Responded to service call for 19-year-old Stirling water softener reported as not functioning properly. Upon arrival, inspected complete water treatment system including softener tank with tan insulation jacket, brine tank, and associated plumbing components. Evaluated control valve head, copper and PVC supply lines, and brass manifold connections for proper operation and potential failure points. Documented system configuration and current condition with photographic evidence for service records.

Conducted plumbing project estimate for basement drainage system with defective pipe containing a belly within the concrete floor. Documented existing conditions including deteriorated concrete flooring with significant staining and exposed PVC drainage piping showing discoloration around joints and trap assembly, indicating potential drainage issues requiring repair or replacement of compromised underground piping.

Responded to gas leak concern at fireplace location where gas line was reportedly damaged during recent work. Performed thorough inspection of gas line and connections through access point, documenting interior condition of mechanical components and gas delivery system. No active gas leak detected during testing; system found to be secure and safe for operation.

Completed annual AC tune-up and preventative maintenance inspection on residential cooling system. Performed electrical diagnostics using multimeter to verify proper voltage and connections at air handler unit. Replaced faulty spade connectors on low-voltage wiring to ensure reliable electrical connections and prevent future system failures. All components tested and operating within manufacturer specifications.

Completed comprehensive ASTU-AC Super Tune-up on residential HVAC system consisting of 12-year-old EnergiAir furnace and air conditioning unit. Performed full system inspection, cleaned components, verified proper operation of heating and cooling equipment, and confirmed all safety controls functioning within manufacturer specifications.

Completed full furnace installation at residential property, replacing existing heating system with new Carrier brand unit. Installation included mounting and securing furnace unit, connecting all necessary ductwork and sheet metal plenum, routing copper refrigerant lines, installing white PVC condensate drainage piping with proper fittings and valves, running electrical conduit and wiring, and positioning condensate drain pan at equipment base. All components properly mounted, sealed, and tested for operational functionality per manufacturer specifications.

Responded to service call for free-spinning gas valve issue preventing stove replacement. Upon arrival, assessed the gas connection point and determined the valve required repair or replacement to allow proper installation of new appliance. Documented existing conditions including flexible gas line connection and electrical outlet configuration in the work area.

Completed first scheduled maintenance visit on 5-year-old Generac generator unit under recurring service plan. Addressed battery alert indication displayed on control panel. Performed comprehensive inspection of generator components including engine assembly, fuel system, and electrical connections. Verified oil level at dipstick reservoir and inspected condition of all fluid lines and hoses. Checked security of all mounting hardware and connection clamps throughout the unit. Examined fuel shut-off valve operation and associated piping. Inspected engine compartment insulation and ventilation components for proper condition. Documented equipment status with photographic records showing current operational configuration and component conditions. All systems verified functional following inspection protocol.

Completed warranty replacement of residential furnace unit in basement utility area. Installed new Energy Excellence branded furnace on black drain pan with proper venting configuration using white PVC intake and exhaust piping routed vertically to existing ductwork. Connected electrical service with flexible conduit to wall-mounted disconnect box, ensuring all connections meet code requirements and manufacturer specifications for safe operation.

Completed comprehensive air conditioning estimate for club member at residential property. Evaluated existing HVAC system in basement mechanical room, including furnace unit with associated ductwork and PVC venting, and documented equipment specifications and installation conditions through detailed photography. Customer provided free upgrade opportunity and indicated decision timeline extending beyond early April.

Responded to service call for non-responsive Honeywell Home digital thermostat following customer battery replacement. Upon arrival, diagnosed issue and successfully restored thermostat to proper operation. Unit now displaying current temperature reading of 68°F and functioning normally with all controls operational.

Responded to no-heat call following previous day's maintenance visit. Upon arrival, found furnace not operating properly. Inspected system and discovered restricted airflow due to dirty air filter that was not replaced during tune-up. Installed new pleated air filter, restored proper airflow, and verified furnace resumed normal heating operation. System tested and confirmed functioning correctly with adequate heat output to residence.

Broke and removed concrete basement floor section to access sump pit location. Installed new perforated sump crock and customer-supplied sump pump unit. Connected new silent check valve to discharge line and ran approximately 20 feet of PVC piping from pump discharge through basement to exterior termination point.

Successfully installed a 50-gallon natural gas water heater with a 6-year tank warranty and 1-year parts warranty in the basement utility area. The installation included connecting copper supply lines with brass fittings, proper venting, and ensuring all connections met code requirements. Unit was tested for proper operation and all safety checks were completed.

Responded to no heat/cool condition with thermostat displaying no power and water accumulation under furnace. Diagnosed 24V power supply issue at furnace control board preventing thermostat operation. Inspected condensate drainage system and found clogged drain line causing water backup beneath unit. Cleared condensate blockage, verified proper drainage flow, and restored low-voltage power to thermostat circuit. System tested successfully for heating and cooling operation with all safety controls functioning properly.