Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Responded to mechanical inspector's correction notice regarding oversized fuses on recently installed air conditioning condenser unit. Inspector identified 30-amp fuses installed in disconnect box, which exceeded the manufacturer's maximum overcurrent protection rating of 20 amps specified on the condenser nameplate. Documented existing installation with detailed photographs showing the oversized FLNR 30A Littelfuse fuses and condenser unit for inspector review and approval consideration per inspector's request.

Conducted comprehensive assessment of existing HVAC system for homeowner concerned about equipment longevity after previous owner indicated furnace and air conditioning units were nearing end of service life. Evaluated current operational status of heating and cooling equipment, documented installation configuration including ductwork connections and utility room layout. Provided detailed replacement options and phased installation approach to accommodate budget considerations, allowing homeowner flexibility to replace furnace and AC unit separately or as complete system based on their preference and timeline.

Completed annual cooling maintenance on 17-year-old system. Performed comprehensive tune-up including inspection of all major components, verified system operation, and confirmed unit is functioning properly for the cooling season.

Responded to callback for faucet installed previous day where two mounting rods disconnected during initial use. Inspected chrome two-handle bathroom faucet assembly and identified improper securing of mounting hardware. Reinstalled and properly tightened mounting rods to manufacturer specifications, tested handles and spout operation, and verified stable installation with no movement or leaks.

Completed quoted repair work and documented electrical disconnect component requiring installation. Photographed fuse holder assembly with three copper terminals in preparation for technician to return and complete disconnect installation. Work order remains open pending final installation.

Responded to no-cool condition caused by water pooling on furnace triggering safety system. Found excessive ice buildup on suction line causing condensation to drip onto furnace, activating water safety switch. Addressed refrigerant line insulation failure and drainage issue to restore system operation.

Successfully installed a 50-gallon electric water heater in the basement utility area, complete with proper electrical connections and plumbing integration. Installed a new sump pump system with PVC discharge piping and flexible hose routing to manage groundwater effectively. Added an expansion tank to the water heater system to protect against thermal expansion and maintain proper system pressure, ensuring all components meet current plumbing code requirements.

Completed installation of customer-supplied plumbing fixtures in bathroom, including two chrome faucets for double-sink vanity and shower valve with cover plate for tub/shower combination. All fixtures installed to code specifications with proper water supply connections, tested for leaks, and confirmed full operational functionality upon completion.

Responded to service call for water leak and drainage issue on 3-year-old EnergiAir system that was cooling but not removing humidity properly. Inspected HVAC system and determined clogged air filter was restricting airflow and preventing proper condensation drainage. Replaced dirty, debris-laden air filter with new pleated filter to restore proper system airflow, humidity removal, and condensate drainage function.

Conducted sales estimate for complete furnace and air conditioning system replacement in residential basement utility space. Assessed existing HVAC equipment configuration, including current furnace unit with associated ductwork, water heater placement, and mechanical room layout to determine optimal equipment sizing and installation requirements for proposed high-efficiency heating and cooling system upgrade.

Completed annual cooling maintenance on 2023 Frigidaire air conditioning system. Performed comprehensive tune-up including system inspection, cleaning, and operational testing. Verified and updated customer contact information. Unit operating within normal parameters with no issues identified. Documented service with photographs for record keeping.

Conducted comprehensive plumbing project estimate for reverse osmosis water filtration system installation in utility room. Assessed existing multi-stage water treatment infrastructure including NUVO water softener, reverse osmosis filtration assembly with multiple white cylindrical filter cartridges, blue pressure tank, and complex plumbing network featuring copper pipes, PVC connections, brass valves, and electronic control devices with LED indicators. Documented current system configuration and prepared estimate for customer water quality optimization project.

Completed annual cooling system tune-up and inspection. Upon arrival, documented existing HVAC equipment and associated mechanical systems including Bradford White 40-gallon natural gas water heater (Serial: NGL8368375, 40,000 BTU/hr input) and basement utility area with electrical panel, copper plumbing lines, and PVC drainage. All accessible components photographed for service records.

Completed installation of a 50-gallon electric tall Bradford White water heater in utility closet. Connected copper supply lines with brass fittings and valves, secured electrical conduit to wall with cable ties, and verified all plumbing connections for proper operation. Unit installed per manufacturer specifications with all required safety labels visible and accessible.

Completed full installation of residential HVAC system including Carrier furnace, air conditioning unit, and water heater in basement mechanical room. All equipment properly positioned, vented, and connected to existing ductwork and plumbing systems. Verified electrical connections, tested system operation with digital multimeter, and confirmed all safety labels and certifications are properly displayed on equipment panels.

Conducted on-site evaluation for furnace replacement estimate at residential property. Assessed existing HVAC infrastructure including ductwork configuration, venting systems, and current equipment layout in unfinished basement space. Documented mechanical room conditions, existing Performance water heater location, gas line routing, PVC condensate drainage, and available clearances for new furnace installation. Photographed current duct connections, structural framing, and utility placement to develop accurate equipment specifications and installation requirements for customer proposal.

Completed annual cooling maintenance on 24-year-old Heil air conditioning system. Performed standard tune-up procedures including inspection of all major components, cleaning, and system testing to ensure proper operation for the cooling season.

Conducted comprehensive sales estimate for complete HVAC system replacement at residential property. Evaluated existing Lennox furnace installation in utility room, assessed current ductwork configuration including metallic trunk lines and branch connections, and documented equipment specifications and operating conditions. Photographed existing equipment layout, condensate drainage lines, venting systems, and overall mechanical room configuration to provide accurate proposal for new furnace and air conditioning system installation.

Responded to complaint of sump pump making intermittent noise in basement near water heater for past 1-2 weeks. Inspected sump pump assembly in concrete floor basin and found system operational but showing significant age-related wear consistent with forty-year-old home. Basin exhibited heavy rust staining and mineral deposits on walls indicating prolonged water exposure. Pump components, discharge piping, and electrical connections displayed visible discoloration and signs of moisture exposure over time. Documented existing conditions with photos showing white corrugated discharge hose, electrical wiring secured with cable ties, and overall pump assembly configuration. System currently functioning for water removal but displaying typical wear patterns that may warrant future replacement consideration.

Completed installation of Bradford White residential water heater in basement utility area. Installed all necessary plumbing connections including copper supply lines, metallic vent pipe with brass fittings, and PVC drainage lines. Ensured proper clearances around unit for maintenance access and verified all connections per manufacturer specifications.