Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Completed trim kit repair and installation at residential property. Serviced kitchen sink area including faucet assembly with gooseneck spout and soap dispenser, ensuring proper mounting and seal integrity. Addressed bathroom bathtub plumbing fixtures including chrome spout, shower valve with escutcheon plate, and drain assembly to restore proper function and appearance.

Completed annual cooling system preventive maintenance and tune-up as part of 2-year equipment maintenance agreement. Performed comprehensive electrical diagnostics and testing on HVAC system components, inspected all wiring connections and electrical controls for proper operation and safety compliance. All systems tested and operating within manufacturer specifications.

Responded to service call regarding cleanup required after previous appointment. Upon arrival, inspected HVAC system including Energi Elite Series furnace unit and associated condensate drain system with white PVC piping configuration. Documented current condition of mechanical room and equipment through photographic documentation. Cleaned utility area surrounding furnace and water heater installations, removing debris and organizing workspace. Verified all PVC condensate drain connections, coupling bands, and piping routes were properly secured. Inspected braided flex lines, yellow valve components, and vertical black piping runs for proper installation. Ensured all equipment labels and safety warnings remained visible and intact on furnace unit. Left mechanical room in clean, organized condition with all components properly positioned and accessible for future service needs.

Completed annual cooling maintenance on 16-year-old Emerson system. Inspected all mechanical components, refrigerant lines, and connections in attic installation; verified proper equipment leveling and confirmed system is operating within normal parameters. All components found clean and well-maintained with no immediate service needs identified.

Conducted comprehensive site assessment for multiple plumbing installations including gas line routing for washer/dryer connection, water softener installation location, bathroom reconfiguration with new sink placement, and utility room pump inspection. Documented existing mechanical room infrastructure, HVAC ductwork, and electrical panel locations to determine optimal routing for new gas lines and water supply connections. Evaluated basement utility space conditions and existing plumbing access points to provide accurate estimate for requested scope of work.

Completed annual cooling maintenance on 11-year-old International Comfort Products system with condenser manufactured in 2021. Performed comprehensive tune-up including system inspection, refrigerant level verification, electrical component testing, and cleaning of condenser coils. Updated contact information and documented equipment condition with photographic records. All systems operating within normal parameters upon completion.

Completed full HVAC system installation consisting of an Amana furnace unit with accompanying air handler in utility room. Installed all required PVC intake and exhaust venting, copper refrigerant lines, and black flexible ductwork connections. Positioned equipment on protective drain pan with proper condensate drainage piping. All manufacturer specifications followed, safety labels verified, and system connections completed per code requirements.

Conducted electrical estimate for 240V hot tub installation at residential property. Assessed existing electrical infrastructure including main panel location in interior wall cavity and available exterior access points near HVAC equipment and deck area. Documented current electrical service capacity, panel configuration with existing circuit breakers, and optimal routing path for new dedicated 240V circuit from panel to proposed hot tub location on deck.

Conducted estimate for mini split installation in four seasons room with white shiplap walls and vaulted ceiling featuring exposed wooden beams. Assessed interior space layout, electrical access points on exterior gray siding, and determined optimal equipment placement for climate control system. Documented existing conditions and provided recommendations for ductless heating and cooling solution.

Conducted on-site evaluation of existing 40-gallon conventional tank water heater for replacement estimate in 27-year-old residential property. Inspected current water heater installation in basement utility area, documenting existing venting system with metal ductwork extending through wooden floor joists, copper supply line connections with shutoff valve, and concrete base platform. Photographed installation configuration including vertical venting arrangement and plumbing connections to provide accurate replacement specifications for standard tank-type water heater unit.

Installed new two-handle brushed nickel bathroom faucet with arched spout on existing vanity with undermount oval basin. Connected supply lines to existing shut-off valves beneath sink and tested for proper water flow and drainage. All connections verified leak-free and system operating correctly.

Responded to recurring shower leak issue after two previous service visits. Conducted thorough inspection of corner shower stall assembly, including fiberglass enclosure, curved shower pan, central drain assembly, and glass door seals. Identified and resolved the source of water intrusion that had worsened since prior service attempts, performed necessary repairs to eliminate active leak, and verified proper drainage function upon completion.

Responded to service call for Sterling water softener system with reported salt consumption issue. Upon inspection, tested water hardness levels and evaluated system operation. Found water softener control head functioning properly with adequate regeneration cycles programmed. Verified brine tank salt level and confirmed minimal usage, indicating system may not be drawing brine effectively during regeneration. Checked brine line connections, venturi assembly, and float mechanism for proper operation. Adjusted regeneration settings and performed manual regeneration cycle to verify brine draw function. Provided water quality test results and system operational recommendations to address salt consumption concerns.

Completed full AC system replacement at residential property. Removed existing outdoor condensing unit and installed new unit against exterior wall with proper clearances. Connected refrigerant lines to indoor air handler located in basement mechanical room adjacent to existing furnace. Installed new condensate drainage piping using PVC, routed vertically through ceiling joists. Verified all electrical connections, tested system operation, and confirmed proper refrigerant charge and airflow. System commissioned and left in full working order.

Completed annual cooling maintenance on 13-year-old EnergiAir system with 2016 condenser model. Performed comprehensive tune-up including refrigerant line inspection at exterior penetration point, verified system temperatures with digital thermometer reading 56°F at supply duct, and documented equipment condition. All measurements within normal operating parameters and system functioning properly.

Completed full HVAC system installation including new Amana furnace and air conditioning unit with A2L refrigerant safety-rated outdoor condenser. Installed evaporator coil, established refrigerant line connections with proper insulation, configured PVC condensate drainage system, and integrated all ductwork connections. Verified proper equipment placement in mechanical room, completed all electrical connections, tested system operation, and documented installation with photos showing both indoor and outdoor components functioning correctly.

Completed furnace estimate for a 15-year-old heating system experiencing an internal leak while maintaining operational heating capability. Performed comprehensive AC tune-up service and documented electrical panel and utility meter installations at single-family residence. System evaluation included photographic documentation of existing infrastructure to support estimate preparation for necessary repairs.

Responded to customer complaint of loud popping, cracking, and rumbling noises occurring during water heater operation. Inspected 7-year-old Richmond Integra water heater installation, documented unit condition, plumbing connections, copper supply lines, brass fittings, expansion tank, and venting system. Provided estimate for water heater replacement to resolve sediment buildup causing thermal expansion noise issues in aging unit.

Responded to water leak inside 15-year-old furnace unit. Upon inspection, discovered extensive rust and corrosion throughout the base drain pan with standing water accumulation, indicating prolonged moisture exposure and deterioration of the metal surfaces. Documented the severe rust damage affecting the interior base section of the HVAC system. Performed AC tune-up service on the system, which remained operational for heating despite the leak condition. Photographed the corroded drain pan, standing water, and overall equipment condition for service records.

Performed comprehensive site assessment of existing air conditioning condenser unit at secondary residence for estimate purposes. Documented current equipment condition and installation environment, noting significant vegetation encroachment around unit perimeter that restricts proper airflow clearance. Photographed unit positioning against exterior wall, electrical disconnect box configuration, and surrounding landscaping conditions to support equipment replacement or maintenance recommendations.