Top-Rated HVAC & Plumbing Services in Grand Haven, MI

Completed annual cooling maintenance on two 25-year-old Trane air conditioning systems. Performed comprehensive tune-up procedures on both units including filter inspection, refrigerant level verification, electrical connection testing, condensate drain cleaning, and thermostat calibration. Both systems operational with no deficiencies noted at time of service.

Completed annual cooling system tune-up on 21-year-old Bryant unit. Performed standard diagnostics using digital multimeter to verify electrical readings and system performance, inspected condensate drain line through ceiling access point, and confirmed proper operation of all components. Unit operating within normal parameters for recurring maintenance service.

Completed annual cooling maintenance on 6-year-old AC system. Inspected and replaced dirty air filters, which showed significant dust accumulation from extended use. Performed comprehensive system evaluation including exterior unit inspection, electrical disconnect box check, and conduit connections. All components found to be in good working order with no immediate repairs needed. System operating within normal parameters and ready for cooling season.

Completed comprehensive ASTU-AC Super Tune-up on residential air conditioning system. Inspected and serviced condensate drainage assembly including PVC piping, multiple elbows, joints, and condensate pump with electrical controls. Verified proper operation of pump mechanism and drainage flow, checked electrical connections and control switches with indicator lights, and ensured drain pan was functioning correctly to prevent water overflow.

Responded to service call for two non-functioning exterior hose bibs. Upon inspection, diagnosed issues with outdoor water spigots, performed necessary repairs to restore proper water flow and functionality to both faucet locations.

Responded to reported water leak from upstairs bathroom in living space above detached garage, with water infiltrating into garage area below. Inspected shower plumbing and drainage system to identify source of leak. Examined supply lines, drain connections, and shower valve assembly for signs of failure or improper sealing. Assessed sink plumbing in same bathroom area per customer request. Investigated recent occupancy changes that may have contributed to increased water usage and leak detection. Performed visual inspection of accessible plumbing components including supply lines, drain piping, and fixture connections. Documented conditions with photographs showing plumbing infrastructure and affected areas. Addressed immediate concerns to prevent further water damage to garage ceiling and contents below.

Completed annual cooling maintenance on 18-year-old Goodman AC system. Performed comprehensive tune-up including inspection of HVAC equipment, control components, condensate drain assembly, and electrical connections. Verified all PVC drainage piping is functioning properly and confirmed system is operating within normal parameters for the 2026 maintenance cycle.

Responded to cooling complaint where thermostat set to 68°F would not maintain temperature. Accessed property using key located in cellar rafters as homeowner was unavailable. Inspected thermostat wiring configuration showing proper connections for Y, C, W, G, R, and OB terminals with appropriate low-voltage wiring. Evaluated HVAC air filter condition and found significant dust and dirt accumulation restricting airflow. Replaced dirty pleated filter with clean unit to restore proper system airflow and cooling capacity. System should now maintain set temperature effectively.

Responded to customer request for leaking tub faucet replacement. Upon arrival, assessed the existing chrome shower/tub faucet control with single lever handle and tub spout assembly. Successfully replaced the faulty faucet system with new fixtures, ensuring proper installation and leak-free operation. Tested water flow and verified all connections were secure with no drips or leaks present.

Responded to cooling complaint on 7-year-old Goodman heat pump system. Upon arrival, found significant water pooling on basement floor near air handler unit, indicating condensate drainage issue. Inspected condensate drain system and identified blockage in PVC drain line preventing proper water evacuation. Cleared obstruction from condensate piping and verified proper drainage flow. Checked air filter condition and found adequate airflow through return system. Tested system operation in cooling mode and confirmed unit cycling properly with adequate cooling capacity. System returned to normal operation with resolved drainage issue.

Returned to site to replace failed zone damper motor on HVAC zoning system. Removed defective motor from zone damper assembly and installed new replacement motor, ensuring proper electrical connections to the ZoneFirst ZDS1608 zone control panel. Verified motor operation, confirmed damper movement through full range of motion, and tested system functionality with all zones responding correctly to thermostat calls.

Conducted on-site assessment for tankless water heater installation at a 40-year-old residential property. Evaluated existing utility room layout, photographed current conventional tank-style Lochinvar water heater, documented available space and existing plumbing infrastructure including visible PVC drainage systems and supply piping connections. Provided comprehensive quote for new tankless water heater system installation including necessary modifications to gas lines, venting requirements, and electrical connections to support tankless unit operation.

Completed annual cooling maintenance on 12-year-old system. Addressed ongoing upstairs cooling deficiency by inspecting airflow, refrigerant levels, and ductwork integrity; recommended filter replacement schedule and potential duct sealing to improve temperature distribution. Documented equipment condition with photos and advised client on next steps for resolving persistent cooling issues in upper level.

Completed annual cooling maintenance inspection on 13-year-old EnergiAir system under membership subscription. Performed comprehensive system evaluation to ensure optimal performance for the summer season. Inspected condensate drain pan and drainage system, noting water staining consistent with normal operation; confirmed drain line and hose clamp connections are secure and functioning properly. All components operating within normal parameters.

Responded to cooling performance complaint following previous day's maintenance visit where compressor saver device was installed. Evaluated 2-year-old Goodman system and inspected hard start kit installation, verifying proper electrical connections and capacitor wiring configuration. System found operating within normal parameters; confirmed compressor saver device was appropriately installed and functioning correctly to extend equipment lifespan. Explained device purpose and benefits to address customer concerns regarding necessity of component. Documented electrical connections with photographs for service records.

Completed thermostat replacement per previous technician's recommendation. Installed new Amana digital touchscreen thermostat and verified proper operation with system reading 80°F ambient temperature. Unit programmed and communicating correctly with HVAC system.

Responded to callback for zoned air conditioning system with cold air discharging into incorrect zone after previous repair attempt. Inspected 12-year-old Payne zoned HVAC system and identified malfunctioning zone damper motor assembly. Found Zone 2 damper actuator failing to maintain proper position, causing airflow to redirect after initial cycling. Verified damper motor wiring connections, tested actuator operation through multiple cycles, and confirmed proper zone control board signaling. Corrected damper linkage positioning and secured all electrical connections at zone control panel. Cycled system through all zone calls to verify proper damper operation and airflow distribution to designated areas. System now operating correctly with airflow directing to appropriate zones as called for by respective thermostats.

Completed full air conditioning system replacement at residential property. Installed new HVAC condensing unit on existing gravel pad against exterior wall with beige vinyl siding, ensuring proper placement and levelness on concrete foundation. Connected refrigerant lines (suction and liquid lines) with appropriate insulation, ran electrical supply conduit and wiring to unit, and mounted electrical disconnect boxes on exterior siding per code requirements. Verified all refrigerant line connections are secure and properly brazed, confirmed electrical connections meet manufacturer specifications and local electrical codes. System startup performed successfully with all operating parameters within normal range.

Responded to upstairs bathroom sink drain issue in 30-year-old home. Upon inspection, found faulty drain assembly requiring replacement. Removed existing P-trap and drain components, installed new white plastic P-trap assembly with proper connections to existing water supply lines. Verified all connections secure, tested for leaks, and confirmed proper drainage function. System restored to full working order.

Completed annual cooling maintenance and tune-up on 4-year-old Goodman air conditioning system. Inspected all major components including evaporator coil, condensate drain system with PVC drain line, and interior base section with drain pan. All systems operating within normal parameters with no issues identified during inspection.